Tender For special Repair/Replacement Of Ci Pipe Line Into Di Pipe Line And Connected Items At Outstation Under Ge Gurdaspur.
Tender Value
28.40 Lakhs
Estimated cost
Bid Submission
20 Nov 2026
19 days left
EMD
56800
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Gurdaspur → Punjab
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for special Repair/Replacement Of Ci Pipe Line Into Di Pipe Line And Connected Items At Outstation Under Ge Gurdaspur.
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in trenches in soft / loose soil not exceeding 1.5m wide and not exceeding 1.5m deep and getting out complete all as specified and directed. |
| 2 | Returning, filling in including spreading, leveling and well ramming in layers not exceeding 25cm thick complete all as specified and directed. |
| 3 | Removing excavated material n.exc. 50 m and depositing where directed at a level n.exc. 1.5 m above the starting point complete all as specified and directed. |
| 4 | M&L for ISI marked CI/DI pipe fittings fixed in repair of size 80 to 200 mm dia such as tapers tail pieces, tee pieces, caps and plug set including push on joints complete as specified and directed. |
| 5 | Taking out existing 100mm bore CI/DI/ MS pipe lines all as directed by Engineer-in-Charge. |
| 6 | All as per item Srl No 05 here- in- before but size 150mm bore. |
| 7 | S&F ductile iron (DI pipes) centrifugally cast (spun) pressure pipe class K-7, size 100mm bore ISI marked with internal cement mortar lining and external zinc and bitumen coated pipe with all spigot and socket ends with push on rubber gasket joint etc complete all as specified and directed. (Note :- laying of pipe may be horizontal or vertical both. The contractor shall keep this aspect in his mind while quoting his bid and nothing extra shall be payable on this account). |
| 8 | All as per item Srl No 07 here- in- before but 150mm bore. |
| 9 | M&L for cutting cast iron/ ductile iron pipes of size 100mm for inserting tees, bends, ferrules etc and making connections complete at time of laying of pipes complete all as specified and directed. (Note :- CI/ DI Tees, bends etc shall be measured and paid for separately). |
| 10 | All as per Srl item No 09 above but size 150mm bore. |
| 11 | S&F in replacement CI sluice valve class PN- 1.6, ISI marked with stainless steel spindle and flanged both ends of size 100 mm bore with hand wheel complete all as specified and directed. |
| 12 | All as per item Srl No 39 here- in- before but size 150mm bore. |
| 13 | Demolition of old unserviceable valve pits and constructing of brick masonary pits of internal dimensions 1000x1000x 1200mm (bottom PCC floor of the pit shall be 30cms below the bottom surface of sluice valve flange to provide sufficient working space), bottom floor of the pit shall be laid in PCC (1:3:6), 15cms thick (using 20mm graded crushed stone aggregate) inner and exposed surfaces and bottom floor of the pit shall be plastered in CM (1:4), 15mm thick. The sluice valve and other fittings shall be housed in centre of the pit, the vertices of the pit should in right angle and chamfered. The top cover of the pit shall be made out of MS sheet 2mm thick with angle iron frame made out of MS angle 50mm x50 mmx 6 mm with galvanised steel hinges two Nos and locking arrangements duly painted with two coats of synthetic enamelled paint over one coat of red oxide primer complete all as specified and directed. |
| 14 | All as per item Srl No 13 here-in- before but internal size 900mmx900mmx 900 mm. |
| 15 | M&L for road cutting including excavation returning filling in spreading leveling , well ramming in layers, soling with broken boulders/ stones obtained from demolition of existing road, 7.5cm thick coarse aggregate obtained from demolition of existing WBM of road, watering and ramming, 40mm thick PCC 1:3:6 type C-1 (using 20mm graded crushed stone aggregate) for road patch repair work, section/ cross section area of cutting shall be as specified and as directed by Engineer -In Charge. |
| 16 | A Schedule of Credit for old/unserviceable demolished/ dismantled items has been catered for in the tender. The Schedule of Credit is pre-priced by MES. The final amount of the tender shall be arrived at after deducting the total amount of Rs. 2,87,000/- Schedule of Credit from the total amount of BoQ as per General Summary sheet catered for after Schedule of Credit. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 29, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 20, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysNov 27, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 26 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender