Tender For Repair To Wooden / Steel Furniture And Misc Including Polishing And Painting At Durgapur,Shibpur, Aerial Bay And Mayabunder Under Ge (South) Diglipur.
Tender Value
22 Lakhs
Estimated cost
Bid Submission
19 Nov 2026
18 days left
EMD
44000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
North and Middle Andaman → Andaman And Nicobar Islands
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair To Wooden / Steel Furniture And Misc Including Polishing And Painting At Durgapur,Shibpur, Aerial Bay And Mayabunder Under Ge (South) Diglipur.
BOQ
| Sl. No. | Item Description |
| 1 | Chair tubular steel with arms (FD-75) Removing damaged/ unserviceable seat from chair tubular steel with Arms and supply and fixing new seat of 460mm x 415mm size made out of first class hard and canning the chair with 2mm plastic cane and 4mm cane for beading and fixing the seat to chair with 4 Nos nut and bolts with washers all as specified and directed. |
| 2 | Chair tubular steel with out arms {FD-75(M)} Removing damaged/ unserviceable seat of size 405x380mm from chair tubular steel with out arm and fixing new seat of 405mm x 380mm size made out of first class hard and canning the seat with 2mm plastic cane and 4mm cane for beading and fixing the seat to chair with 4 Nos nut and bolts with washers all as specified, shown on drg and directed. |
| 3 | Chair tubular steel with arms (FD-75) Removing damaged/ unserviceable back from chair tubular steel with Arms and supply and fixing new back of size 460mm x 415mm made out of first class hard and canning the chair back with 2mm plastic cane and 4mm cane for beading and fixed to the chair with 4 Nos nut and bolts with washers all as specified, shown on drg and directed. |
| 4 | Chair tubular steel with out arms {FD-75(M)} Removing damaged/ unserviceable back from chair tubular steel with out arms and supply and fixing new back of size 405mm x 380mm made out of first class hard and canning the chair back with 2mm plastic cane and 4mm cane for beading and fixed to the chair with 4 Nos nut and bolts with washers all as specified, shown on drg and directed. |
| 5 | Chair tubular steel with arms (FD-75) Removing damaged/ unserviceable arms from chair tubular steel with arms and supply and fixing new arms made out of first class hard wood with suitable size of screws including painting the wooden surface with two coats of first quality black synthetic enamel paint over a coat of primer complete all as specified and as directed. |
| 6 | Removing damaged/ unserviceable rubber bush to the bottom of the chair tubular steel with Arms and with out arms and S & F with new synthetic rubber bush of size as per existing with suitable size of screw as per drawing complete all as specified and as directed. FD- 75 & 75(M) |
| 7 | M & L for painting one coat of synthetic enamel paint of approved shade to steel surfaces of Chair tubular steel with arms (FD-75) of MES pattern including preparation of surfaces complete all as specified and as directed Chair tubular steel with arms (FD-75). |
| 8 | M & L for painting one coat of synthetic enamel paint of approved shade to steel surfaces of Chair tubular steel without arms (FD-75M) of MES pattern including preparation of surfaces all as specified & directed and shown on drawings. Chair tubular steel without arms (FD - 75M). |
| 9 | Locker Bed Side Steel (FD-1029)Removing unserviceable handle and S & F new CP handle 'D' type 100mm long complete all as specified & directed and as shown on drg. |
| 10 | Locker Bed Side Steel (FD-1029)Removing unserviceable hasp & staple and S & F new CP hasp & staple75mm long complete all as specified & directed and shown on drg. |
| 11 | Locker Bed Side Steel (FD-1029)Removing unserviceable hinges and S & F new MS hinges 75 mm long complete as specified & directed and as shown on drg. |
| 12 | Locker Bed Side Steel (FD-1029)Removing old unserviceable leg and S & F new leg of size 440x70x100 mm made out of MS sheet 1.25 mm thick, made to shape and fixing in the same position by welding including painting with one coat of synthetic enamle paint over a coat of red oxide primer as specified & directed and shown on drg. |
| 13 | Locker Bed Side Steel (FD-1029)Removing old unserviceable shelf carefully and S & F new shelf made out of MS sheet 1mm thick made to shape and fixing the same properly in position including painting with one coat of synthetic enamle paint over a coat of red oxide primer as specified & directed and shown on drg. |
| 14 | Locker Bed Side Steel (FD-1029)Removing old unserviceable door single leaf carefully and S & F new door single leaf made out of MS sheet 1mm thick made to shape & size and fixing the same properly in position including painting with one coat of synthetic enamle paint over a coat of red oxide primer as specified & directed and shown on drg. |
| 15 | Locker Bed Side Steel (FD-1029) M & L for painting one coats of synthetic enamel paint of approved shade both internally and externally to Locker Bed Side Steel of MES pattern including Removing dents applying putty to level the surface before painting all as specified & directed and shown on drawings. |
| 16 | Almirah Steel Medium/ Small (FD-350/1032/1034)Removing u/s handle and S & F of 125 mm long chromium plated handle for almirah steel large and medium all as shown on drg and as directed by Engr-in-Charge. |
| 17 | Removing old u/s lock and S & F of new lock 6 levers with duplicate keys complete all as shown on drg and as directed by Engr-in-Charge. |
| 18 | Removing old u/s clips and S & F of new clips made out of 3mm MS plate made to shape and size complete all as shown on drawing and as driected (For one clip). |
| 19 | Removing old u/s cover and S & F of new cover made out of 1mm thick (size as shown on drg) MS sheet made to suitable for locking device complete all as specified/ directed and shown on drg. |
| 20 | Removing old u/s shelf carefully and S & F of new shelf made out of MS sheet 1mm thick bent to shape and fixed the same properly in position including painting of single coat of red oxide primer as specified/ directed and shown on drawing. (For one shelf) |
| 21 | Removing old u/s door single leaf carefully and S & F of new door single leaf made out of MS sheet 1mm thick bent to shape and fixed the same properly in position including painting of single coat of red oxide primer as specified/directed and shown on drawing. (For one door) |
| 22 | Removing old u/s legs and S & F of new legs made out of MS sheet 1.25 mm thick of size 420x70x100 mm made to shape and fixed in the same position including painting of single coat of red oxide primer as specified/directed and shown on drg. (For one leg) |
| 23 | M & L for painting two coats of synthetic enamel paint approved shade both internally and externally to Almirah Steel Medium/ Small of MES pattern including removing of dents applying putty to the level of the surface before painting all as specified/ directed and shown on drawings. Almirah Steel Medium/ Small (FD-350/1032/1034) |
| 24 | Almirah Steel Large (FD-1031/1033/351/TP)Removing u/s handle and S & F of 125 mm long chromium plated handle for almirah steel large all as shown on drg and as directed by Engr-in-Charge. |
| 25 | Removing old u/s lock and S & F of new lock 6 levers with duplicate keys complete all as shown on drg and as directed by Engr-in-Charge. |
| 26 | Removing old u/s clips and S & F of new clips made out of 3mm MS plate made to shape and size complete all as shown on drawing and as driected (For one clip). |
| 27 | Removing old u/s cover and S & F of new cover made out of 1mm thick (size as shown on drg) MS sheet for almirah large steel made to suitable for locking device complete all as specified/directed and shown on drg. |
| 28 | Removing old u/s shelf of almirah large carefully and S & F of new shelf made out of MS sheet 1mm thick shape & size and fixing the same properly in position including painting of single coat of red oxide primer as specified/ directed and shown on drg. (For one shelf) |
| 29 | Removing old u/s door single leaf carefully and S & F of new door single leaf for almirah large made out of MS sheet 1mm thick shape & size and fixing the same properly in position including painting of single coat of red oxide primer as specified/ directed and shown on drg. |
| 30 | Removing old u/s legs and S & F of new legs made out of MS sheet 1.25 mm thick of size 485x70x100 mm for almirah large made to shape and fixing in the same position including painting of single coat of red oxide primer as specified/directed and shown on drawing. (For one leg) |
| 31 | M & L for painting two coats of synthetic enamel paint approved shade both internally and externally to the following furniture article of MES pattern including removing of dents applying putty to the level of the surface before painting all as specified/ directed and shown on drawings. Almirah Steel Large (FD-1031/1033/351/TP) |
| 32 | Teapoy Verandah (FD-205/208/383/382/FD/MAP/II/17)Removing old unserviceable top from Teapoy Verandah steel and supply and fixing new top 18 mm thick prelaminated particle board exterior grade with top face decorative teak wood shade lamination and other side balancing white lamination including 6mm x 18mm teak wood edging alround top fixed as per drg and as directed. |
| 33 | Teapoy Verandah (FD-205/208/383/382/FD/MAP/II/17.)M & L for painting one coat of synthetic enamel paint approved shade to steel surfaces of Teapoy Verandah of MES pattern all as specified & directed and shown on drawings including removal of damaged/ unserviceable rubber shoe and S & F with new rubber shoe all as specified & directed and shown on drawings. |
| 34 | Table dining ORs 1900x685x760 mm (Drg No FD-165)Removing old unserviceable table top and S & F new table top 1830 mm x 680 mm using 18 mm thick block board including covering the top surface with 22 gauge aluminium sheet cut to size and fixed with MS screws of size as directed complete all as shown on drg. |
| 35 | Table dining ORs 1900x685x760 mm (Drg No FD-165)Removing rusted/ unserviceable long rail/ long stiffner and S & F new long rail/ long stiffner made out of 25 mm MS square tube, 1.6 mm thick, 1550 mm long, fixed by means of continuous welding to legs/ short stiffner to match the existing components including painting with one coat of synthetic enamle paint over a coat of red oxide primer as specified & directed and shown on drawing. |
| 36 | Table dining ORs 1900x685x760 mm (Drg No FD-165)Removing rusted/ unserviceable short rail/ short stiffner and S & F new short rail/ short stiffner made out of 25mm MS square tube, 1.6 mm thick 465 mm long, fixed by means of continuous welding to legs to match the existing components including painting with one coat of synthetic enamle paint over a coat of red oxide primer all as specified & directed and shown on drawing. |
| 37 | Table dining ORs 1900x685x760 mm (Drg No FD-165)Removing rusted/ unserviceable leg and S & F new leg made out of 25 mm MS square tube 1.6 mm thick, 741mm long, fixed by means of continious welding to rails/ stiffner to match the existing components including painting with one coat of synthetic enamle paint over a coat of red oxide primer all as specified & directed and shown on drawing. |
| 38 | Table dining ORs 1900x685x760 mm (Drg No FD-165)M & L for painting one coat of synthetic enamel paint approved shade to steel surfaces of Table dining ORs of MES pattern including Removal of damaged/ unserviceable rubber shoe and S & F with new rubber shoe all as specified & directed and shown on drawings. |
| 39 | Table office clerk steel (FD-84M/1004)Removing old unserviceable table top and S&F new table top 1220x610 mm using 18 mm thick pre-laminated plywood with sunmica board exterior grade one side decorative teak wood shade and other side balancing white including 4 x 18 mm thick teak wood edging alround the table top complete all as specified & directed and shown on drg. |
| 40 | Table office clerk steel (FD-84M/1004)Removing old unserviceable drawers from table office clerk steel and supply and fixing new drawer steel complete made out 1 mm thick MS sheet bent to shape & made to size including painting with one coat of synthetic enamle paint over a coat of red oxide primer after necessary preparation of surface complete all as specified and directed. |
| 41 | Table office clerk steel (FD-84M/1004)M & L for painting to steel surfaces of table office clerk with one coat of synthetic enamel paint of approved shade both internally and externally by Removing dents, applying putty to the level of the surface before painting including preparation of surfaces and removing damaged/ unserviceable rubber shoe and S & F with new rubber shoe of size all as specified & directed and shown on drawings. |
| 42 | Table office officers steel (FD-1003)Removing old unserviceable table top and S & F new table top 1680x870 mm using 18 mm thick pre-laminated plywood with sunmica boarde teak wood shade and other side balancing white including 18 x 4 mm thick teak wood edging alround the table top complete all as specified & directed and shown on drg. |
| 43 | Table office officers steel (FD-1003)Removing old unserviceable drawers from table office clerk steel and supply and fixing new drawer steel complete made out 1 mm thick MS sheet bent to shape & made to size including painting with one coat of synthetic enamle paint over a coat of red oxide Primer after necessary preparation of surface complete all as specified and directed. |
| 44 | Table office officers steel (FD-1003)M & L for painting one coat of synthetic enamel paint approved shade both internally and externally to steel surfaces of table officer office steel by removing dents and applying putty to the level the surface before painting including preparation of surfaces and removing damaged/ unserviceable rubber shoe and S & F with new rubber shoe of size all as specified & directed and shown on drawings. |
| 45 | Removing old unserviceable following parts of Table writing and replacing with new one as shown on drawing FD-275:- |
| 46 | (a) Table top, 18 mm thick pre-laminated plywood with sunmica board one side natural teak shade and other side white of size 1145 X 600 mm with 6 mm thick teak wood edging all around after necessary cutting and made to size & shape and fixing in same poition as shown on drg & as directed by Engr-in-charge. |
| 47 | (b) First class HW (TW) leg for table writing as shown on drg and as directed by Engr-in-charge. |
| 48 | (c) First class HW (TW) Top side rail (single piece) of table writing size as per drawing and as directed by Engr-in-charge. |
| 49 | (d) Drawer complete with Knob of table writing size as per drawing and as directed by Engr-in-charge. |
| 50 | (e) First class HW (TW) long rail for table writing size as per drawing and as directed by Engr-in-charge. |
| 51 | (f) First class HW (TW) bottom rail of table writing size as per drawing and as directed by Engr-in-charge. |
| 52 | (g) Shutter of 18mm thick prelaminated particle board one side natural teak shade and other side white of size as per drg with 6 mm thick teak wood edging all around complete with knob/ handle and lock with duplicate keys fixed with and including piano hinges for table writing size as per drawing and as directed by Engr-in-charge. |
| 53 | (h) First class HW (TW) Stiffener bottom of table writing size as per drawing and as directed by Engr-in-charge. |
| 54 | (i) Ply wood 6 mm thick comercial for back of table writing size as per drawing and as directed by Engr-in-charge. |
| 55 | Removing old unserviceable following parts of table dining 6 persons and replacing with new one as shown on drawing FD-273 (Sht 1/2 & 2/2):- |
| 56 | (a) Table top, 18 mm thick pre-laminated plywood with sunmica board one side natural teak shade and other side white of size 1500 X 900 mm with 6 mm thick teak wood edging all around after necessary cutting and made to size & shape and fixing in same poition as shown on drg & as directed by Engr-in-charge. |
| 57 | (b) First class HW (TW) leg of size 760x75x40 mm for table dining six persons as shown on drg and as directed by Engr-in-charge. |
| 58 | (c) Short rail of first class HW (TW) of size 900x10x25 mm for table dining six persons as shown on drg and as directed by Engr-in-charge. |
| 59 | (d) Long rail of first class HW (TW) of size 1500x10x25 mm for table dining six persons as shown on drg and as directed by Engr-in-charge. |
| 60 | Removing old unserviceable following parts of table dining 8 persons and replacing with new one as shown on drawing FD-273 (Sht 1/2 & 2/2):- |
| 61 | (a) Table top, 18 mm thick pre-laminated plywood with sunmica board one side natural teak shade and other side white of size 1800 X 900 mm with 6 mm thick teak wood edging all around after necessary cutting and made to size & shape and fixing in same poition as shown on drg & as directed by Engr-in-charge. |
| 62 | (b) First class HW (TW) leg for table dining eight persons as shown on drg and as directed by Engr-in-charge. |
| 63 | (c) Short rail of first class HW (TW) for table dining eight persons as shown on drg and as directed by Engr-in-charge. |
| 64 | (d) Long rail of first class HW (TW) for table dining eight persons as shown on drg and as directed by Engr-in-charge. |
| 65 | Removing the unserviceable components/ Parts from the Bed plywood top and replacing with new one as shown on drawing Bed plywood FD-246, FD/E6/MAP/08R and all as directed by Engr-in chrage for following :- |
| 66 | (a) 12mm thick ply wood top of size 1920mm x 900mm (single piece) BWR Grade fixed to wooden frame with suitable size of MS Screws as ordered all as shown on drg and as directed. Makes as per policy in vogue. |
| 67 | (b) Head side board complete as per drg. |
| 68 | (c) Foot side board complete as per drg. |
| 69 | (d) First class hard wooden long rail of size 90mm x35mm x 1930mm long. |
| 70 | (e) First class hard wooden short rail of size 90mm x 35mm x 900mm long. |
| 71 | (f) First class hard wood legs of size 60mm x 60mm x 600mm high including fixing of rubber rings/ shoes as shown on drg. |
| 72 | (g) First class hard wood stiffeners of size 45mm x 45mm x 900mm long fixed on shorter span to support ply wood top complete all as directed. |
| 73 | Removing old unserviceable following parts of sofa set 5 seater (3 seater plus two single seater) and replacing with new one as shown on drawing FD-281. |
| 74 | (a) Back long rail / seat long rail of 1st class HW(Teak Wood) of size 35x70x1680 mm as per drawing and as directed by Engineer-in-charge. |
| 75 | (b) Stiffeners in Seat/back of size 20x50x600 mm as per drawing and as directed by Engineer-in-charge. |
| 76 | (c) 1st class HW (TW) arm of size 525x70x35 mm complete all as shown on drg and directed by Engr-in-charge. |
| 77 | (d) M&L 100mm thick foam 40 density of size 21\\"x22\\" ISI marked complete as directed by Eng-in-Charge. |
| 78 | (e) Taking down worn out/ damaged tapestry and lining cloth from foam cushion of size of 21\\"x22\\"x100mm and supply and stiching new linning cloth and finally covering entire foam with new tapestry cloth, shade and colour as approved complete all as directed by Engr-in-Charge. |
| 79 | Removing old unserviceable following parts of table center and replacing with new one as shown on drawing FD-274:- |
| 80 | (a) Table top of table centrre, 18 mm thick pre-laminated plywood with sunmica board one side natural teak shade and other balancing white of size 900 X 450 mm with 6 mm thick teak wood edging all around after necessary cutting and made to size & shape and fixing in same position as per drg & as directed by Engr-in-charge. |
| 81 | (b) First class HW (TW) Legs of table centre, size as per drawing and as directed by Engr-in-charge. |
| 82 | (c) First class HW (TW) stiffener/ short rail of table centre, size as per drawing and as directed by Engr-in-charge. |
| 83 | (d) First class HW (TW) Top rail (Long) of table centre size as per drawing and as directed by Engr-in-charge. |
| 84 | Removing old unserviceable following parts of teapoy and replacing with new one as shown on drawing FD-232/278:- |
| 85 | (a) Top of teapoy, 18 mm thick pre-laminated plywood with sunmica board one side natural teak shade and other balancing white of size 600 X 450 mm with 6 mm thick teak wood edging all around after necessary cutting and made to size & shape and fixing in same position as per drg & as directed by Engr-in-charge. |
| 86 | (b) First class HW (TW) Legs of teapoy, size as per drawing and as directed by Engr-in-charge. |
| 87 | (c) First class HW (TW) Top rail of teapoy size as per drawing and as directed by Engr-in-charge. |
| 88 | (d) First class HW (TW) bottom rail of teapoy size as per drawing and as directed by Engr-in-charge. |
| 89 | (e) First class HW (TW) stiffener of teapoy, size as per drawing and as directed by Engr-in-charge. |
| 90 | Removing old unserviceable following parts of Peg table and replacing with new one as shown on drawing FD-251/378/277:- |
| 91 | (a) Top of peg table, 18 mm thick pre-laminated plywood with sunmica board natural teak shade one side and other side balancing white of size 450 X 380 mm with 6 mm thick teak wood beading all around after necessary cutting and made to size and shape and fixing in same position as shown on drg & as directed by Engr-in-charge. |
| 92 | (b) First class HW (TW) Legs of Peg table, size as per Drawing and as directed by Engr-in-charge. |
| 93 | (c) First class HW (TW) side rail top (Long) of Peg table size as per drawing and as directed by Engr-in-charge. |
| 94 | (d) First class HW (TW) side rail top (short) of Peg table size as per drawing and as directed by Engr-in-charge. |
| 95 | Removing old unserviceable following parts of TABLE 900 X 900 X 760 mm and replacing with new one as shown on drawing FD-291 :- |
| 96 | (a) Table top, 18 mm thick pre-laminated plywood with sunmica board one side natural teak shade and other balancing white of size 900 x 900 mm with 6 mm thick teak wood edging all around after necessary cutting and made to size & shape and fixing in same position as per drg & as directed by Engr-in-charge. |
| 97 | (b) First class HW (TW) Legs of table 900 x 900 x760, size as per drawing and as directed by Engr-in-charge. |
| 98 | (c) First class HW (TW) side rail top (single piece) of table 900 x 900 x 760mm, size as per drawing and as directed by Engr-in-charge. |
| 99 | Removing old unserviceable following parts of Table 900 X 600 X 760 mm with or without drawer and replacing with new one as shown on drawing FD-223/224/283/284 :- |
| 100 | (a) Table top, 18 mm thick pre-laminated plywood with sunmica board one side natural teak shade and other balancing white of size 900 x 600 mm with 6 mm thick teak wood edging all around after necessary cutting and made to size & shape and fixing in same position as per drg & as directed by Engr-in-charge. |
| 101 | (b) First class HW (TW) Legs of table 900 x 600 x760 with or without drawer, size as per drawing and as directed by Engr-in-charge. |
| 102 | (c) First class HW (TW) top rail long (single piece) of table 900 x 600 x 760mm with or without drawer, size as per drawing and as directed by Engr-in-charge. |
| 103 | (d) First class HW (TW) side rail short (single piece) of table 900 x 600 x 760mm with or without drawer, size as per drawing and as directed by Engr-in-charge. |
| 104 | (e) Drawer complete with Knob of table 900 x 600 x 760mm with drawer, size as per drawing and as directed by Engr-in-charge. |
| 105 | Removing old unserviceable following parts of TABLE 900 X 900 X 760 mm and replacing with new one as shown on drawing FD-291 :- |
| 106 | (a) Mirror with ply wood backing ,Teak wood frame, Teak wood vertical support as per drawing & as directed by Engr-in-charge. |
| 107 | (b) Ply wood for back of box of table dressing gents size as specified and shown on drawing and as directed by Engr-in-charge. |
| 108 | (c) Ply wood for bottom of box of table dressing gents size as specified and shown on drawing and as directed by Engr-in-charge. |
| 109 | (d) Pre laminated Particle board one side natural teak shade and other side balancing white for top of table dressing gents as specified and shown on drawing and as directed by Engr-in-charge. |
| 110 | (e) Pre laminated Particle board one side natural teak shade and other side balancing white for side of box of table dressing gents as specified and shown on drawing and as directed by Engr-in-charge. |
| 111 | (f) Drawer complete with knob for table dressing gents as specified and shown on drawing and as directed by Engr-in-charge. |
| 112 | Removing old unserviceable following parts of table dressing ladies and replacing with new one as shown on drawing FD-251/378:- |
| 113 | (a) Mirror with ply wood backing ,Teak wood frame, Teak wood vertical support as specified and shown on drawing & as directed by Engr-in-charge. |
| 114 | (b) First class HW (TW) Legs of table dressing ladies size as per drawing and as directed by Engr-in-charge. |
| 115 | (c) Drawer complete with knob of table dressing ladies size as per drawing and as directed by Engr-in-charge. |
| 116 | Removing following old unserviceable parts of side board and replacing with new one as shown on drawing FD-251/378:- |
| 117 | (a) Shutters with 18 mm thick pre-laminated plywood with sunmica board one side natural teak shade and other balancing white with 6 mm thick teak wood beading all around, shutter shall be fixed to the side board with full lengh MS piano hinges including 2 Nos of Knobs & one lock four lever brass all as shown on drawing and as directed by Engr-in-charge. |
| 118 | (b) Ply wood commercial type cut to size and fixed in position at the back side of the side board with suitable wood screw complete all as shown on drawing and as directed by Engr-in-charge. |
| 119 | (c) Shelves made out of 12mm thick ply wood commercial type for side board as per drawing and as directed by Engr-in-charge. |
| 120 | (d) First class HW (TW) legs for side board as per drawing and as directed by Engr-in-charge. |
| 121 | (e) First class HW (TW) bottom stiffeners for side board as per drawing and as directed by Engr-in-charge. |
| 122 | (f) Drawer complete with knob for side board as specified and shown on drawing and as directed by Engr-in-charge. |
| 123 | (g) Pre laminated particle board with teak face one side and other side balancing white for top portion of the side board as specified and shown on drawing and as directed by Engr-in-charge. |
| 124 | (h) Pre laminated particle board one side teak face other side white for bottom with 3 mm x 19 mm thick teak wood edging for side board size as per drawing and as directed by Engr-in-charge. |
| 125 | (i) Pre laminated particle board one side teak face other side white for side with 3 mm x 19 mm thick teak wood edging for side board size as per drawing and as directed by Engr-in-charge. |
| 126 | Chair easy FD-229 Taking out/Dismantling worn out/ Damaged/ defective front leg from chair easy and replacing the same with new parts after necessary cutting and made to size and shape with first class hard wood (teak) & fixed in same position as per drg & as directed by Engr-in-Charge. |
| 127 | (a) All as per item No 126 but rear leg as per drg. |
| 128 | (c) All as per item No 126 but front rail as specified and shown on drg (Single Piece). |
| 129 | (d) All as per item No 58 but rear rail as specified and shown on drg (Single Piece). |
| 130 | (e) All as per item No 126 but front frame & back frame (seat) all as specified and shown on drawing (Single Piece). |
| 131 | (f) All as per item No 126 side frame all as specified and shown on drawing (Single Piece). |
| 132 | (g) Arm all as specified and shown on drawing (Single Piece). |
| 133 | (h) Canning the chair with 2mm plastic cane and 4mm cane for beading of Chair easy DRG No FD-229 all as per drawing and as directed by Engr-in-charge. |
| 134 | Chair Writing FD-250/280: Taking out/ Dismantling of worn out/ Damaged/ defective leg from chair writing and replacing the same with new parts after necessary cutting and made to size and shape with first class hard wood (teak) & fixed in same poition as per drg & as directed by Engr-in-Charge. |
| 135 | (a) All as per item No 134 but Rear leg as per drawing. |
| 136 | (b) All as per item No 134 but Front rail as per drawing. |
| 137 | (c) All as per item No 134 but Rear rail as per drawing. |
| 138 | (d) All as per item No 134 but Side rail (Single piece) as per drawing. |
| 139 | (e) All as per item No 134 but Arm (Handle) as per drawing. |
| 140 | (f) All as per item No 134 but Bottom stiffener. |
| 141 | (g) Canning the chair with 2mm plastic cane and 4mm cane for beading of Chair writing DRG No FD-250/280 all as per drawing and as directed by Engr-in-charge. |
| 142 | Chair dining Offrs FD/MAP-II/04 : Taking out/ Dismantling of worn out/ Damaged/ defective front leg as per drawing from chair dining long back and replacing the same with new parts after necessary cutting and made to size and shape with first class hard wood (teak) & fixed in same poition as per drg & as directed by Engr-in-Charge. |
| 143 | (a) All as per item No 142 but Rear leg as per drawing. |
| 144 | (b) All as per item No 142 but Front rail as per drawing (Single Piece). |
| 145 | (c) All as per item No 142 but Rear rail as per drawing (Single Piece). |
| 146 | (d) All as per item No 142 but Bottom stiffeners as per drawing. |
| 147 | (e) All as per item No 142 but Cushioned seat as per drawing. |
| 148 | Chair Dining JCO/OR : FD/MAP-II/05 Taking out/Dismantling of worn out/ Damaged/ defective front leg from Chair Dining MAP Drg and replacing the same with new parts after necessary cutting and made to size and shape with first class hard wood (teak) including polishing the complete wooden parts with two or more coats until high glossy finish is obtained after necessary preparation of surface & fixed in same position as per drawing & as directed by Engr-in-charge. |
| 149 | (a) All as per item No 148 but rear leg as per drawing. |
| 150 | (b) All as per item No 148 but PVC Seat of Chair dining JCO/OR : FD/MAP-II/05 as per drawing. |
| 151 | (c) All as per item No 148 but Front rail as per drawing. |
| 152 | (d) All as per item No 148 but Rear rail as per drawing. |
| 153 | (e) All as per item No 148 but Side rail (Single piece) as per drawing. |
| 154 | (f) All as per item No 148 but Teak wood stiffener (back support) (Single piece) as per drawing. |
| 155 | (g) All as per item No 148 but Bottom stiffeners as per drawing. |
| 156 | Chair Dining FD-228/279: Taking out/ Dismantling worn out/ Damaged/ defective front leg from chair and replacing the same with new parts after necessary cutting and made to size and shape with first class hard wood (teak) & fixed in same position as per drg & as directed by Engr-in-Charge. |
| 157 | (a) All as per item No 156 but rear leg as per drg. |
| 158 | (b) All as per item No 156 but Front rail as per drawing. |
| 159 | (c) All as per item No 156 but Rear rail as per drawing. |
| 160 | (d) All as per item No 156 but Side rail (Single piece) as per drawing. |
| 161 | (e) All as per item No 156 but Teak wood stiffener (back support) (Single piece) as per drawing. |
| 162 | (f) All as per item No 156 but Bottom stiffeners as per drawing. |
| 163 | (g) Canning the chair with 2mm plastic cane and 4mm cane for beading of Chair dining DRG No FD-228/279 all as per drawing and as directed by Engr-in-charge. |
| 164 | First class hard wood (Teak wood) bracket, joining leg and front frame/ back frame/ side frame / long rail / short rail single piece, triangular in shape size 75 x 75, 20mm thick as directed by Engr-in-charge including taking out existing. |
| 165 | First class HW (TW) triangular bracket of size 100 x 100, thickness 25mm joining leg and long/ short rail complete as directed by Engineer in Charge including taking out existing. |
| 166 | First class HW (TW) triangular bracket of size 150 x 150, thickness 25mm joining leg and long/ short rail complete as directed by Engineer in Charge including taking out existing. |
| 167 | Material and labour for two coat of french polishing to the following furniture article of MES pattern Viz F/FD/DB series or similar items including appying wax for depressed surfaces before polishing all as specified and shown on drgs and directed by Engr-in-charge. |
| 168 | (a) Bed Ply wood top FD-246,247 |
| 169 | (b) Bin Soild linen DB-3981,FD-244 |
| 170 | (c) Chair without Arms (all types) Fd-275,225,16,228,279, FD/MAPII/04 & 05. |
| 171 | (d) Chair with Arms (all types but except Chair Easy ) FD-280,20,202 |
| 172 | (e) Chair Easy FD-229,17,20 |
| 173 | (f) Sofa Set 5 Seater complete FD-281/373 |
| 174 | (g) Side Board FD-226 |
| 175 | (h) Table dining 6 Persons FD-30,239,273,139,376,CEHZ/FD-12,FD-139,289 |
| 176 | (i) Table dining 8 Persons FD-30,239,273,139,376,CEHZ/FD-12,FD-139,289 |
| 177 | (j) Table 900 X 900 X 760 mmFD-95,293,88,41,291, 42,55, 223,224,231,291. |
| 178 | (k) Table centre FD-235 |
| 179 | (l) Table Dressing gents FD-230 |
| 180 | (m) Table dressing ladies FD-230,284 |
| 181 | (n) Table Peg FD-230,284 |
| 182 | (o) Table writing Med/study DB-4119,3982,FD-84,275,33,34,249 |
| 183 | (p) Teapoy DB-4069,2375,FD-232 |
| 184 | (q) Hat stand (small) FD-23,2096,233,361 Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 29, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 19, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysNov 21, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender