Tender For Repair/Replacement Of Roofing And Other B/R Works At Dgre And Mes Area Under Age (I) R N D Manali.
Tender Value
9.50 Lakhs
Estimated cost
Bid Submission
19 Nov 2026
16 days left
EMD
19000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kullu → Himachal Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair/Replacement Of Roofing And Other B/R Works At Dgre And Mes Area Under Age (I) R N D Manali.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling plain or corrugated steel sheeting, any gauge, thickness roof coverings incl ridge, complete all as specified and as directed by Engineer-in-Charge. |
| 2 | M&L for Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as AZ 150 as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and as directed by Engineer-in-Charge. |
| 3 | M&L Pre- painted galvalume aluminium zinc coating GI based Plain steel sheet 0.5 mm thick of any colour having tensile strength of 550 Mpa as in ridges/ valley gutters/Eaves Board for buiding up to 10 mtr necessary ladder and scaf holding etc, fixed with self tapping screw, complete all as specified and as directed by Engineer-in-Charge. |
| 4 | Dismentling unframed timber scantlings 40 sq. cm and over in section, in any position, complete all as specified and as directed by Engineer-in-Charge. |
| 5 | M&L for Mild steel work in tubular trusses, purlins, vetical posts including special shaped washer, angle cleats, fish plates, gusset plates, base/ bearing plates, bolts and nuts etc. complete using ERW or induction butt welded tubes conforming to 1161-1979 grade st 240, complete all as specified and as directed by Engineer-in-Charge. |
| 6 | M&L for preparation of new steel surfaces of any description over 10cm in width or girth not otherwise described and applying 2 coats of Synthetic enamel paint over a coat of red oxide primer, complete all as specified and as directed by Engineer-in-Charge. |
| 7 | Dismentling unframed timber in fillets,rails,posts,rafter ,purlin etc under 40 Sqcm in section, complete all as specified and as directed by Engineer-in-Charge. |
| 8 | S&F plain fillets squre,rectangular or triangular in section clean sawn secured with nails of 2nd class hard wood sectional area exc 3 Sqcm and not Exc 6 Sqcm, but bullnosed, splayed,chamfered or rounded on one edge or face, complete all as specified and as directed by Engineer-in-Charge. |
| 9 | S&F plain fillets squre,rectangular or triangular in section clean sawn secured with nails of 2nd class hard wood sectional area exc 13 and not Exc 25 Sqcm, complete all as specified and as directed by Engineer-in-Charge. |
| 10 | M & L for preparing new or previously untreated of wooden and applying two coats of synthetic enamel paint over incl a coat of red oxide over 10 cm in width or girth, complete all as specified and as directed by Engineer-in-Charge. |
| 11 | M&L for 12 mm thick prelaminated particle board interior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination, fixed with screws to frame work as in ceiling/Walls, complete all as specified and directed by Engr-in-Charge. Note:-( The rates are include to taking down and refixing electrical fitting and fixture proparly in working condition) |
| 12 | M&L for abour for random rubble stone masonary, uncoursed well bounded, bedded and soilidly hearted in cement mortar (1:4) including demoltion and remove debries out of MOD land, complete all as specified and as directed by Engineer-in-Charge. |
| 13 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead, complete all as specified and as directed by Engineer-in-Charge. |
| 14 | M&L rendering 15mm thick plaster on other than face fair face of brick work in CM 1:4 and surface finished even and fair, complete all as specified and as directed by Engineer-in-Charge. |
| 15 | M&L for rendering 15 mm thick cement mortar (1:6) on fair faces of stone masonary wall surfaces, complete all as specified and directed by Eng-in-Charge. |
| 16 | M&L for two coats of oil bound distemper on walls on newly plastered surfaces over one mm thickness wall care putty including preparation of surfaces by brooming or by steel wire brushing, complete all as specified and as directed by Engineer-in-Charge. |
| 17 | Preparation of new plaster surface of wall and applying 2 coat of cement base paint over a coat of primer, complete all as specified and as directed by Engineer-in-Charge. |
| 18 | M&L for PCC 1:2:4 type B1 (using 20 mm graded stone aggregates) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar parapets and railings, copings, kneelers, apex stones, bed plates, slightly rounded or chamfered angles and throating, as directe incuding necessary formwork required including in repair, complete all as specified and as directed by Engineer-in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 29, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 19, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 16 daysNov 26, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 23 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender