Tender For Up-Grade (Widening And Raising Of Footpath, Construction of New Gazebos, S/O Benches, Construction of Entry Gate, Theme Painting And Preparation Of Mounds) Of Centurian Park, Sector Techzone-4, Greater Noida.
Tender Value
71.44 Lakhs
Estimated cost
Bid Submission
12 Nov 2026
12 days left
EMD
1.43 Lakhs
Bank guarantee accepted
Document Fee
1900
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Gautam Buddha Nagar → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Up-Grade (Widening And Raising Of Footpath, Construction of New Gazebos, S/O Benches, Construction of Entry Gate, Theme Painting And Preparation Of Mounds) Of Centurian Park, Sector Techzone-4, Greater Noida.
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and for all lift, as directed by Engineerin- charge. : All kinds of soil (DSR-2023/2.6.1) |
| 2 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 cement : 4 manufactured sand derived from Recycled Concrete Aggregate (RCA) : 8 graded stone aggregate 40 mm nominal size Recycled Aggregate (RA)). (DSR-2023/4.1.8A) |
| 3 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in : Cement mortar 1:4 (1 cement : 4 coarse sand) (DSR-2023/6.1.1) |
| 4 | Supply of 60mm thick ISI marked | Shaped machanically compressed Interlocking cement concerete paver blocks, smooth high laoss finish, skid resistant, manufactured from rubber moulds through vibrocompressiojn mechanism, high pressure and control vibration machine having plan dimension 200 x (160+120mm) with minimum 5mm thick topping. The compressive strength of concerete paver block shall not be less than 30 MPa and weight 4kg per No. confirming to IS: 15658-2006 (SOR-2025/ChNo-2/4(a)) |
| 5 | Laying of Interlocking Tiles of 60/80/100 mm thick including levelling and dressing of surface up to required level and slopes over 30 mm thick bed and filling joints with fine sand including cost of fine sand, labour, T&P etc complete But excluding cost of Tile as directed by Engineer in charge. (SOR-2025/Ch No-5/5.07) |
| 6 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) (DSR-2023/4.1.3) |
| 7 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) (DSR-2023/5.1.2/AR) |
| 8 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) (DSR-2023/5.2.2/AR) |
| 9 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). (DSR-2023/5.3/AR) |
| 10 | Providing and laying pressed clay tiles (as per approved pattern 20 mm nominal thickness of approved size) on roofs jointed with cement mortar 1:4 (1 cement : 4 coarse sand) mixed with 2% integral water proofing compound, laid over a bed of 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand) and finished neat complete. (DSR-2023/12.20/AR/SOR) |
| 11 | Finishing walls with textured exterior paint of required shade : New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm (DSR-2023/13.45.1) |
| 12 | Centering and shuttering including strutting, propping etc. and removal of form for : (DSR-2023/5.9) |
| 13 | Foundations, footings, bases of columns, etc. for mass concrete (DSR-2023/5.9.1) |
| 14 | Columns, Pillars, Piers, Abutments, Posts and Struts (DSR-23/5.9.6) |
| 15 | Lintels, beams, plinth beams, girders, bressumers and cantilevers (DSR-23/5.9.5) |
| 16 | Suspended floors, roofs, landings, balconies and access platform (DSR-2023/5.9.3) |
| 17 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. : Thermo-Mechanically Treated bars of grade Fe-500D or more. (DSR-2023/5.22.6) |
| 18 | Supply and Fixing of (Dustbin Set of 3) Capacity 80ltr each, make- Nilkamal, Size 400x400 top, 300x300 Bottom, 900mm Ht, Stand made up of ISI marked SQ, pipe of 35mm x 35mm x 18 gauge powder caoted, size- 4.5' x 1.5' x 750mm |
| 19 | Garden Bench Having total Wt-70-75 Kgs, Size 5Ft lenth Garden Benches (70-75 Kg Cast iron legs with 7 tank powder coating with 8 nos fiber 4mm thick strips with stainless steel rut bolt, seating material frames /patii-FRP: (Fiber-Reinforced Plastic) |
| 20 | 12 mm cement plaster of mix : 1:4 (1 cement: 4 coarse sand) (DSR-2023/13.4.1) |
| 21 | Neat cement punning. (DSR-2023/13.18/AR) |
| 22 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. : In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works (DSR-2023/10.25.2) |
| 23 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work (DSR-2023/13.61.1/AR) |
| 24 | Theme painting on Metro & Elevated road pillar on bottom surface with artistic acrylic colour with PU coating including contractor Profit. |
| 25 | Preparation of mounds of various size and shape by avialable excavted/supplied earth in layer not exceeding 20cm in depth, breaking clods, watering of each layer dressing etc. lead upto 50 meter and lift upto 1.5 m complete as per direction fo office in charge. |
| 26 | Supplying and stacking of good earth at site including royalty and carriage upto 5Km. Lead complete (earth measured in stacks will be reduced by 20% for payment) Based on PWD SOR (AR/GNIDA) |
| 27 | Ploughing the existing ground to a depth of 15cm to 25cm and watering the same. All kind of Soil. |
| 28 | Rough dressing the trenched ground including breaking clods |
| 29 | Fine dressing of the ground (AR/GNIDA) |
| 30 | Uprooting weeds from the trenched area after 10 to 15 days of its flooding with water including disposal of uprooted vegetatio. |
| 31 | Supply of selection-1/doob grass in carpet at site fresh and free from weeds having proper roots in green including loading, unloading carriage and all taxed paid etc. and per direction of officer in charge (1 Sqm carper grass covers 4.0Sqm area of grassing) (AR/GNIDA) |
| 32 | Grassing with selection no.1/doob grass including watering and maintenance of the lawn for 30 days or more till the grass forms a thick lawn, free from weeds and fit for mowing including supplying good earth it needed (The grass and good earth shall be paid for separately) (AR/GNIDA)in rows 5 cm apart in both directions |
| 33 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels. (DSR-2023/8.2) |
| 34 | Granite stone slab of colour black, Cherry/Ruby red: Area of slab upto 0.50 sqm (DSR-2023/8.2.2.1/AR) |
| 35 | Finishing walls with textured exterior paint of required shade : New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm (DSR-2023/13.45.1) |
| 36 | Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and for all lift, as directed by Engineerin- charge. : All kinds of soil (DSR-2023/2.6.1) |
| 37 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 cement : 4 manufactured sand derived from Recycled Concrete Aggregate (RCA) : 8 graded stone aggregate 40 mm nominal size Recycled Aggregate (RA)). (DSR-2023/4.1.8A) |
| 38 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) (DSR-2023/5.1.2/AR) |
| 39 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. : Thermo-Mechanically Treated bars of grade Fe-500D or more. (DSR-2023/5.22.6) |
| 40 | Centering and shuttering including strutting, propping etc. and removal of form for : (DSR-2023/5.9) |
| 41 | Foundations, footings, bases of columns, etc. for mass concrete (DSR-2023/5.9.1) |
| 42 | Columns, Pillars, Piers, Abutments, Posts and Struts (DSR-23/5.9.6) |
| 43 | Lintels, beams, plinth beams, girders, bressumers and cantilevers (DSR-23/5.9.5) |
| 44 | Suspended floors, roofs, landings, balconies and access platform (DSR-2023/5.9.3) |
| 45 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand) (DSR-2023/6.1.1) |
| 46 | 12 mm cement plaster of mix : 1:4 (1 cement: 4 coarse sand) (DSR-2023/13.4.1) |
| 47 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels. (DSR-2023/8.2) |
| 48 | Granite stone slab of colour black, Cherry/Ruby red : Area of slab over 0.50 sqm (DSR-2023/8.2.2.2) |
| 49 | Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineerin- Charge. Granite work (DSR-2023/8.3.2/AR) |
| 50 | Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. (DSR-2023/13.26) |
| 51 | Garden Bench Having total Wt-70-75 Kgs, Size 5Ft lenth Garden Benches (70-75 Kg Cast iron legs with 7 tank powder coating with 8 nos fiber 4mm thick strips with stainless steel rut bolt, seating material frames /patii-FRP: (Fiber-Reinforced Plastic) |
| 52 | P/f floral and ornate decorative design cast iron base panels of thickness 20mm as per design copy enclosed having height of 760mm and length of 2700 (approx.) each cast iron panel having mild steel flat of size 40x25mm on top in framing and hold fast 150.00mm length embedded in to the column, pillar at either end with proper grinding of welded marks. Electric supply for welding work to the arranged by the contractor complete. Sprandal, spray primer and painted with enamel paint of approved brand, quility, color complete as per the direction of E/I. Total weight of one panel shall be 85.00 Kg. Approx. (MR) |
| 53 | Providing and laying pressed clay tiles (as per approved pattern 20 mm nominal thickness of approved size) on roofs jointed with cement mortar 1:4 (1 cement : 4 coarse sand) mixed with 2% integral water proofing compound, laid over a bed of 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand) and finished neat complete. (DSR-2023/12.20/AR/SOR) |
| 54 | Finishing walls with textured exterior paint of required shade : New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm (DSR-2023/13.45.1) |
| 55 | Stone work (machine cut edges) for wall lining etc. (veneer work) upto 10 metre height, backing filled with a grout of average 12 mm thick cement mortar 1:3 (1 cement : 3 coarse sand) including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade : (To be secured to the backing and the sides by means of cramps and pins which shall be paid for separately) : ((DSR-2023/8.14) |
| 56 | White sand stone - Exposed face machine cut and table rubbed with rough backing.: 30 mm thick (DSR-2023/8.14.4.5/AR) |
| 57 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work (DSR-2023/13.61.1/AR) |
| 58 | Supplying and stacking of good earth at site including royalty and carriage upto 5Km. Lead complete (earth measured in stacks will be reduced by 20% for payment) Based on PWD SOR (AR/GNIDA) |
| 59 | Labour cess and GST will be paid extra as per Govt. orders. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 30, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 12, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysNov 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 16 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender