Tender For Road Safety Work Under Zfd Scheme On Kuli Kot Marg, Saidpur Bhuruhi Marg & Gadha Kot Marg Road Distt. Fatehpur
Tender Value
24 Lakhs
Estimated cost
Bid Submission
04 Nov 2026
4 days left
EMD
2.40 Lakhs
Bank guarantee accepted
Document Fee
944
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Fatehpur → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Road Safety Work Under Zfd Scheme On Kuli Kot Marg, Saidpur Bhuruhi Marg & Gadha Kot Marg Road Distt. Fatehpur
BOQ
| Sl. No. | Item Description |
| 1 | Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface. Providing and laying of hot applied thermoplastic compound mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclustve of surface applied glass beads as per IRC:35-2015 The finished surface to be level. uniform and free from streaks and holes.MORTH 803(8.13) |
| 2 | Retro-reflectorised Traffic sign as per IRC-67-2012 providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC :672012 made of high intensity grade sheeting type-IV vide clause 801 3, fixed over aluminium sheeting 1 .5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means Of properly designed foundation with M 15 grade cement concrete 45 cm x 45 cm x 60 cm. 60 cm below ground level as per approved drawing. The Retro reflective sheeting shall be tested for a certificate of having the sheeting tested for coefficient ot retro reflection, daytime colour and luminance, shrinkage, flexibility, liner removal. adhesion, impact resistance, specular gloss and fungus resistance, a years outdoor weathering and its having passed these tests shall be obtained from InternationallGovemment Laboratory/ Institute by the manufacturer of the sheeting and in Case the certificate is obtained from international condition. it should also be obtained from Indian condition within 3 years of launching of product by the manufacture in abroad. Alternatively, a certificate conforming to ASTM Specification (D 4956-09) on artificial accelerated weathering requirements from a reputed laboratory in India can be accepted provisionally. in such a situation. the Employer / Client, if so desires. could seek for a performance guarantee which would be released after receipt of certificate meeting the requirement Of three years outdoor weathering of the sheeting as per IRC 67:2012_ Legends letters numerals and borders etc should be as per MoRTH specification No-801.3,7 Proof of the same in form Of government report shall be uploaded while quoting tender60 cm Circular with dlffinitation plate (20cm X 60cm) . MORTH 801 8.4(i) (Speed limit Sign) |
| 3 | Retro-reflectorised Traffic sign as per IRC-67-2012 providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC :672012 made of high intensity grade sheeting type-IV vide clause 801 3, fixed over aluminium sheeting 1 .5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means Of properly designed foundation with M 15 grade cement concrete 45 cm x 45 cm x 60 cm. 60 cm below ground level as per approved drawing. The Retro reflective sheeting shall be tested for a certificate of having the sheeting tested for coefficient ot retro reflection, daytime colour and luminance, shrinkage, flexibility, liner removal. adhesion, impact resistance, specular gloss and fungus resistance, a years outdoor weathering and its having passed these tests shall be obtained from InternationallGovemment Laboratory/ Institute by the manufacturer of the sheeting and in Case the certificate is obtained from international condition. it should also be obtained from Indian condition within 3 years of launching of product by the manufacture in abroad. Alternatively, a certificate conforming to ASTM Specification (D 4956-09) on artificial accelerated weathering requirements from a reputed laboratory in India can be accepted provisionally. in such a situation. the Employer / Client, if so desires. could seek for a performance guarantee which would be released after receipt of certificate meeting the requirement Of three years outdoor weathering of the sheeting as per IRC 67:2012_ Legends letters numerals and borders etc should be as per MoRTH specification No-801.3,7 Proof of the same in form Of government report shall be uploaded while quoting tender90 cm equilateral tingle with diffinitation plate size (20cm X 60cm) MORTH 801 8.4(iii) Juncton ahead sign |
| 4 | Retro-reflectorised Traffic sign as per IRC-67-2012 providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC :672012 made of high intensity grade sheeting type-IV vide clause 801 3, fixed over aluminium sheeting 1 .5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means Of properly designed foundation with M 15 grade cement concrete 45 cm x 45 cm x 60 cm. 60 cm below ground level as per approved drawing. The Retro reflective sheeting shall be tested for a certificate of having the sheeting tested for coefficient ot retro reflection, daytime colour and luminance, shrinkage, flexibility, liner removal. adhesion, impact resistance, specular gloss and fungus resistance, a years outdoor weathering and its having passed these tests shall be obtained from InternationallGovemment Laboratory/ Institute by the manufacturer of the sheeting and in Case the certificate is obtained from international condition. it should also be obtained from Indian condition within 3 years of launching of product by the manufacture in abroad. Alternatively, a certificate conforming to ASTM Specification (D 4956-09) on artificial accelerated weathering requirements from a reputed laboratory in India can be accepted provisionally. in such a situation. the Employer / Client, if so desires. could seek for a performance guarantee which would be released after receipt of certificate meeting the requirement Of three years outdoor weathering of the sheeting as per IRC 67:2012_ Legends letters numerals and borders etc should be as per MoRTH specification No-801.3,7 Proof of the same in form Of government report shall be uploaded while quoting tenderSTOP Board 90 cm High octagonal morth 801 8.4 (vii) |
| 5 | Direction and place Identification signsMore Than 0.90 sqm size Board Providing and erecting direction and place identification retro-reflectorised sign as per IRC-67 made of high intensity grade sheeting The Retro reflective sheeting Shali be tested for a cedificate of having the sheeting tested for coefficient ot retro reflection. daytime colour and luminance. shrinkage, flexibility. liner removal. adhesion. impact resistance, specular gloss and fungus resistance. 3 years outdoor weathering and Its having passed these tests shall be obtained from InternationauGovemment Laboratory/ Institute by the manufacturer of the sheeting and in case the certificate is obtained from international condition. it should also be obtained from Indian condition within 3 years of of product by the manufacture in abroad. Alternatively. a certificate conforming to ASTM Specification (D 4956-09) on artificial accelerated weathering requirements from a reputed laboratory India can be accepted provisionally. In such a situation, the Employer / Client, if so desires, could seek for a peHormance guarantee which would be released after receipt of certificate meeting the requirement of three years outdoor weathering of the sheeting as per IRC 67:2012. Legends . numerals and borders etc should be as per MORTH specification No-80113.7 Sheet fixed over aluminium sheeting .2 mm thick with area not exceeding 0.9 sqm.Supponed on a mild steel single angle iron post 75x75x6 mm firmly fixed to the ground by means of property designedfoundation with M-15 grade cement concrete 45x45x60 ground level as per approvedAccident Prone locaton Board |
| 6 | Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface (Repeated/ Tranverse Bar)Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface. (Repeated / Tranvers bar) providing and laying of hct applied thermoplastic compound 15 mm thick including reflectorising glass beads @ 500 gms per sqm area, thickness of 15 mm is exclusive of surlace applied glass beads as per IRC:35-2015 The finished surface to be level, uniform and free from streaks and holes, MoRTH - 803 (8.13) -Base |
| 7 | Solar Power Road markar ( Solar Studs)The solar studs shall be made of aluminium aloy and poly carbonate material which shall be absolutely Weather resistant and strong enough to support a load of 13,635 kg tested in accordance with ASTM D4280 ITS colour may be white red yellow green or blue or combination as directed by the Engineer Its water resistance shall meet the requirements of IP 65 in accordance with IS 12063: 1987 category 2 for Protection against water ingress the dimensions of solar studs shall not be less than 100mm x100x10 mm it shall have super bright leds so as to provide long visibilty from a distance of more than 800 m ITs flashing rate shall not be less than 1 HZ Its should be able to give the prescribed performance in the temperrature range of 40 C to 55 C its life shall be not less than 3 years the rate shall include all materials labour equpments fabrication transportation erection installation and incidentals all complete as per directon of the Engineer -in- Charge |
| 8 | Reflective Raised Pavement Markers (Cat Eye/ Road Stud)Supply and fixing of raised pavement marker with Made of Plastic body of RPM/ Road Stud shall be moulded from ASA (Acrylic Styrene Acrylonitrite) or HIPS (High-Imoact Polystyrene) or Acryloniitrite Butadien Styrene (ABS) or Any other suitable material approved by the Engineer, The Marker shall support a load of 13,635 kg tested in accordance with ASTM 04280.The Reflective panels shall consist of number of tenses contatning single or dual prismatic cubes capable of providing total internal reflection of the light entring the lens face. Lenses shall be mauled of methyl methecrylate conforming to ASTM 0788 of equivalent. The slop or retrcJ-reflecting surface shall preferably be 35+1-5 degree to base and the area of each retro -reflecting surface shail not be less than 13.00 sq.cm. the marker height shall not be less than 10 mm and shall not exceed 20 mm & Width shall not exceed 130 mm, The base of the marker shall be flat within 1.3 mm all road studs shah be legibly marked with the name trade or other means of identification of the manufacture. epoxy installations, excess adhesive around the edge of the marker, excess adhesive on the pavement and adhesive on the exposed surfaces of the markers shall be immediately removed. The contractor shall submit a two year warranty for satisfactory field performance including stipulated retro-reflectance of the reflecting panel to the Engineer . In addition , a two year warranty for satisfactory ftlfield performance of the finished road marker shall also be given by the contractor who Carries out the work Of fixing of reflective road markers, In case the markers are displaced damaged . get worn out or lose their reflectivity compared to stipulated standards the contractor would be required to replace all such markers within 15 days of the intimation from the Engineer , at his own cost- The rate shall include al' materials, labour, T&P. transportation, installation and incidentals all complete as per direction of the Engineer-in-Cnarge. RPM (with shank) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 30, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 04, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysNov 04, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender