Public Administrative Department Government Departments Closing in 5 days TDR #58280099

Tender For Annual Plan-Morayur Gp (Project No 89/27)Improvement Works To Manjappullathppara Anganawadi In Ward 1-Improvement Works To Manjappullathppara Anganawadi-General Civil Work

Issued by Government Departments · Malappuram, Kerala
Tender Value
2.11 Lakhs
Estimated cost
Bid Submission
05 Nov 2026
5 days left
EMD
5295
Bank guarantee accepted
Document Fee
555
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Malappuram → Kerala
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender for Annual Plan-Morayur Gp (Project No 89/27)Improvement Works To Manjappullathppara Anganawadi In Ward 1-Improvement Works To Manjappullathppara Anganawadi-General Civil Work

BOQ

Name of Work:- Annual Plan-Morayur GP (project No 89/27)IMPROVEMENT WORKS TO MANJAPPULLATHPPARA ANGANAWADI in ward 1-IMPROVEMENT WORKS TO MANJAPPULLATHPPARA ANGANAWADI-General Civil Work
Sl. No. Item Description
1Anganavadi Renovation
2OD150047/2026-2027:(Od From 15.28.1) Dismantling roofing including ridges, hips, velleys and gutters etc., and stacking the material within 50 metres lead of :Fibre Corrugated Sheet, MS&GI trafford sheet, Asbestos cement Sheet Etc
3OD150048/2026-2027:(Od From 15.17.2)Dismantling steel work in single sections including dismembering and stacking within 50 metes lead in:Channels, angles, tees and flats,tubes ets
4OD150065/2026-2027:Dismantling leterite masonry work or hollow or solid block masonry work in any thickness manually / by mechanical means including stacking of serviceable and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge:In cement mortar
5OD150078/2026-2027:DISMANTLING DR - Dismanling , clearing away and carefully stacking materials useful for reuse for any thickness of walls in DR masonry including disposal of debris within a distance of 150m.
62.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil
7OD150063/2026-2027:(From Irrigation OD 60.7.1) DRY RUBBLE MASONRY _ Dry rubble without concrete levelling course masonry with good quality blasted rubble including packing to compactness to lines and levels cost and conveyance of all materials labour charges etc. complete as per direction of Departmental officers at site
8OD151129/2026-2027:(Od from 60.7.8)DR with Departmental. Stone - DRY RUBBLE MASONRY _ Dry rubble without concrete levelling course using departmental rubble including packing to compactness to lines and levels, labour charges etc. complete as per direction of Departmental officers at site
95.9.1:Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete
1050.6.7.1:Laterate masonry with neatly dressed laterate stone of size 40x20x15cm or nearest size in cement mortar 1:6 for foundation and basement including all cost of materials, labour charges etc.
11OD150163/2026-2027:(Od from 50.6.7.1)Laterate masonry using departmental stone with neatly dressed laterate stone of size 40x20x15cm or nearest size in cement mortar 1:6 for foundation and basement including all cost of materials, labour charges etc.
125.22.6:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more
135.1.3:Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size derived from natural sources)
144.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)
1550.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete
16OD150094/2026-2027:(Od from 50.10.2)Steel work for purlin/single section with G I pipes(Departmental Material) including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete
17OD150095/2026-2027:Providing and fixing 150mm wide, square cut PVC 4kgf/cm2 rain water gutter pipe with ironbrackets with 25x5 mm size flat, screws and washers etc., including making necessaryconnections with rain water pipes etc. complete.
18OD150096/2026-2027:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch ofcorrugation as approved by Engineer-in-charge) 0.35 mm (+0.05%), total coated thickness withzinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxyprimer on both side of the sheet and polyester top coat 15-18 microns. Sheet should haveprotective guard film of 25 microns minimum to avoid scratches during transportation andshould be supplied in single length up to 12 meter or as desired by Engineer-in-charge. Thesheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal,complete up to any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins,rafters and trusses and including cutting to size and shape wherever required.
1910.25.2:Item Shifted to Sub head 14 as item 14.73Item Shifted to head 14 as item 14.74Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works
202.28.1:Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m.All kinds of soil
21OD151121/2026-2027:(Od From 16.68) Providing and laying 60 mm thick factory made cement concrete interlockingpaver block of M - 30 grade made by block making machine with strong vibratory compaction,of approved size, design & shape, laid in required colour and pattern over and including 50 mmthick compacted bed of stone aggregate(single size),6mm nominal size filling the joints withfine sand etc. all complete as per the direction of Engineer-in-charge.
22OD151123/2026-2027:(Od From 16.68) Providing and laying 60 mm thick factory made cement concrete interlockingpaver block of M - 30 grade(using departmental material) made by block making machine with strong vibratory compaction,of approved size, design & shape, laid in required colour and pattern over and including 50 mmthick compacted bed of stone aggregate(single size),6mm nominal size filling the joints withfine sand etc. all complete as per the direction of Engineer-in-charge.
2313.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)
2413.33.1:Pointing on stone work with cement mortar 1:3 ( 1 cement : 3 fine sand):Flush/ Ruled pointing
2513.43.1:Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer
2613.60.1:Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work
2750.18.9.17.2:Providing and fixing PVC pipes including fixing the pipe with clamps/clips at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 63 mm dia 4 Kgf/cm2- External work - exposed on wall Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58280099
AUTHORITY Government Departments
TENDER VALUE 2.11 Lakhs
LAST DATE 05-11-2026
Authority
Authority Name Local Self Government Department
Work Description Tender for Annual Plan-Morayur Gp (Project No 89/27)Improvement Works To Manjappullathppara Anganawadi In Ward 1-Improvement Works To Manjappullathppara Anganawadi-General Civil Work
Basic Detail
Tender No 05/2026-27AE/LIDEW/MYR/1 PHASE
Bidding Type Tender
Location
City Malappuram
State Kerala
Key Dates
Publish Date 29 Oct 2026
Submission Date 05 Nov 2026
Open Date 06 Nov 2026
Finance
Tender Value 2.11 Lakhs
Tender Fee 555
EMD 5295
Exemption Available
Document List
71d5f598-54f2-43dc-8405-3f4b8c263a01.html
89nit.pdf
89sbd.pdf
BOQ_1504955.xls
Tendernotice_1.pdf
Tendernotice_2.pdf
Tendernotice_3.pdf
Tendernotice_4.pdf
Tendernotice_5.pdf
Tendernotice_6.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Oct 29, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 05, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 5 days
Nov 06, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 6 days

Tender Documents

Download All (ZIP) ↓
html

71d5f598-54f2-43dc-8405-3f4b8c263a01.html

pdf

89nit.pdf

pdf

89sbd.pdf

xls

BOQ_1504955.xls

pdf

Tendernotice_1.pdf

pdf

Tendernotice_2.pdf

pdf

Tendernotice_3.pdf

pdf

Tendernotice_4.pdf

pdf

Tendernotice_5.pdf

pdf

Tendernotice_6.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender