Tender For Tnpgcl-Nctps-Iii (1X800mw) - Mechanical Circle - Ahp Dn. - Reconditioning Of Rotary Vane Feeder ,Fluidizing Air Blowers And Dust Conditioner And Its Gear Box Of Bottom Ash Silo Equipments
Tender Value
Ref. Documents
Estimated cost
Bid Submission
05 Nov 2026
2 days left
EMD
7900
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Thiruvallur → Tamil Nadu
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Tnpgcl-Nctps-Iii (1X800mw) - Mechanical Circle - Ahp Dn. - Reconditioning Of Rotary Vane Feeder ,Fluidizing Air Blowers And Dust Conditioner And Its Gear Box Of Bottom Ash Silo Equipments
BOQ
| Sl. No. | Item Description |
| 1 | Charges for dismantling the dust conditioner internals and externals like cleaning , de couple the gear box and dust conditioner, inspection door/Top cover,100NB Shaft seamless pipe (SS 304), Plummer blocks, spray pipe and vertical pipe for Bottom ash silo and Fly ash silo including cost of hire charges ,T&P required and consumables such as fasteners, Gaskets and other Safety appliances etc., as directed by the Engineer-in-charge complete. |
| 2 | Charges for Erection and commissioning of dust conditioner internals and externals like gear box and dust conditioner, door/Top cover,100NB Shaft seamless pipe ( SS 304), Plummer blocks, spray pipe and vertical pipe for Bottom ash silo including cost of crane hire charges, T&P required and consumables such as fasteners, Gaskets and other Safety appliances etc., as directed by the Engineer-in-charge complete. |
| 3 | Charges for Overhauling the floating Plummer blocks, End covers. And Removing the NDE Shaft with sprocket wheels, sliding guide ways and gland casing in the SSB conveyor and Cleanout chain conveyor (Primary, Secondary & Tertiary). As per the direction of the Engineer-in-charge including the charges for All T&P required, consumables, safety appliances, and all labour charges etc, complete. |
| 4 | Charges for Overhauling, Inspection of Vanes, Bearings, recondition of sprocket wheels, Checking & Correcting the alignment of Rotary Feeders in Bottom Ash Handling System including the cost of hire charges for T&P required, consumables and other Safety appliances etc., as directed by the Engineer-in-charge complete. |
| 5 | Charges for Overhauling of Rotary van feeder Gear box in Bottom ash silo and its internals, Replacing the O rings, Oil Seals, and filling the gearbox with oil to adequate level etc., including the cost of required material, hire charges for special tools, T&P’s required, consumables and other Safety appliances required etc., as directed by the Engineer-in-charge complete. |
| 6 | Charges for reconditioning the damage / wornout Target Box Hitting plate, Fabrication of new Hitting plate, Fixing the new Hitting plate including the cost of MS plate and other consumables required, T&Ps required etc,. |
| 7 | Charges for Overhauling of Clean out conveyor (Primary, Secondary and Tertiary) gear box, its internals, Replacing the O rings, Oil Seals, and filling the gearbox with oil to adequate level etc., of the Clean out conveyor (Primary, Secondary and Tertiary) Gear box including the cost oil seal , Gasket ,O ring , hire charges for special tools, T&P’s required, consumables and other Safety appliances required etc., as directed by the Engineer-in-charge complete. |
| 8 | Charges for Dismantling and Overhauling of Bottom ash Fluidizing air blowers and its internals, Dismantling of 'V' belt, blower pulley and dismantling of Blower suction and Delivery connection , safety valve, NRV , both side gear assembling and bearing etc., Replacing the O rings, Oil Seals, and filling the gearbox with oil to adequate level etc., including the cost of required material, hire charges for special tools, T&P’s required, consumables and other Safety appliances required etc., as directed by the Engineer-in-charge complete. |
| 9 | Charges for Cleaning & Clearing the spilled and accumulated Bottom ash from bottom ash hoppers floor area, all the SSB Conveyor areas , single roll ash crusher, Coarse ash from ECO Hoppers , Vibrating screen, Intermediate surge hopper operating floor area and air lock vessel area transporting the Ash to low laying area of NCTPS-III by using contractors vehicle and unloading the same & return Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 29, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysNov 06, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender