Tender For Construction Of Passenger Shed/ Yatri Shed At Bhyada Dhar,Hanswar Nallah,Paddar
Tender Value
13.50 Lakhs
Estimated cost
Bid Submission
05 Nov 2026
3 days left
EMD
27000
Bank guarantee accepted
Document Fee
600
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kishtwar → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Passenger Shed/ Yatri Shed At Bhyada Dhar,Hanswar Nallah,Paddar
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation for all kind of soil |
| 2 | P/Laying base concrete (1:4:8) mix as mud mat & curing complete. |
| 3 | Random Rubble masonry with hard stone in foundation and plinthincluding leveling up with cement concrete 1:6:12 (1 Cement : 6 coarse sand : 12 gradestoneaggregate 20mm nominal size) upto plinth level and curing complete with: Cement mortar 1:6 (1 Cement : 6 coarse sand) |
| 4 | Providing and laying in position reinforced cement concrete of specified grade excluding the cost of centering and shuttering.All works upto plinth level in M-15(1:2:4) grade, with 20mm nominal size of Nallaha stone aggregates. |
| 5 | Random Rubble masonry with hard stone in superstructure above plinthlevel and upto floor five level, including levelling up with cement concrete1:6:12(1Cement :6 coarse sand : 12 graded stone aggregate 20mm nominal size) and curing complete at window sills, ceiling level and the like:Cement mortar 1:6 (1 Cement : 6 coarse sand) |
| 6 | Providing wood work in frames of doors, windows, clerestory windows andother frames, wrought framed and fixed in position with hold fast lugs or withdash fasteners of required dia and length (hold fast lugs or with dash fastenersshall be paid for separately): Second class kail wood |
| 7 | Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. Thermo-Mechanically Treated bars. |
| 8 | Providing and fixing 35 mm thick panelled or panelled and glazed shutters for doors, windows and clerestory windows including lSI marked M.S. pressed Butt hinges bright finished of required size with necessary screws excluding panelling which will be paid for separately,al! complete as per direction of engineer- in charge. Second class Kail wood |
| 9 | Centering and Shuttering including strutting, popping and removal of form work |
| 10 | 20 mm Cement plaster on the rough side of Stone masonary of mix: 1 : 6 ( 1 cement : 6 fine sand) |
| 11 | Providing and laying in dry stone metal with 40mm nominal size of stone aggregates). |
| 12 | Cement concrete flooring 1:2:4 ( 1cement: 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ) finished with a floating coat of neat cement including cement slurry, but excluding the cost of nosing of steps etc. complete. 50 mm thick Aggregates. |
| 13 | Providing and fixing hard board ceiling, sheet of approved quality with necessary nails etc. complete (frame work to be paid for separately) Standard Quality board 6mm thick |
| 14 | Providing wood work in frames of false ceiling, partitionsetc. sawn and fixed in position : Badloo /far wood |
| 15 | Providing hoisting and fixing trusses/purlins /rafters/posts/ post-plates or like components including cost of screws etc. complete First class Budloo/Fir wood |
| 16 | Providing corrugated G. S. sheet roofing including vertical/ curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size andshape whereever required. 0.63mm thick with zinc coating not less than 275gm/m2 |
| 17 | Providing ridges or hips of width 60cm overall width plain G.S.sheets fixed with polymer coated J. or L hooks, bolts and nuts8mm dia G. I. limpet and bitumen washers complete0.50mm thick with zinc coating not less than 275gm/m2 |
| 18 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade New work (two or more coats) over and in -eluding priming coat with cement primer |
| 19 | Applying priming coat:with ready mixed pink or grey primer ofapproved brand and manufacture on wood work (hard and soft wood) |
| 20 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade. Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand |
| 21 | Providing and fixing aluminium sliding door bolts lSI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with nuts and screws etc. complete :300x16 mm |
| 22 | Providing and fixing aluminium tower bolts lSI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : |
| 23 | Providing and fixing Aluminium handels ISI marked anidized (anodic coating) not less than grade AC 10 per IS 1868) transpaent or dyed to required colour or shade with nuts and screw etc complete 100mm |
| 24 | 200 mm |
| 25 | 125 mm |
| 26 | 100 mm |
| 27 | Carriage of Sand by 05 km by A/T |
| 28 | Carriage of Stone aggregates (Bajri) by Mechenical Transport/ manual means including loading , unloading & stacking complete lead upto 50 km / 5km |
| 29 | Carriage of stone from 0.50 km by h/l |
| 30 | Carriage of cement avg 15 km by M/T and avg 5km |
| 31 | CIB (citizen information Board ) size 4'00\\"x5'00\\"x0'9\\" (above plinth level) with tepered top having 20 degree slope in Brick Masonary ( 1:4) including plaster , paint, lettering and logos as per instruction of Engineer -in-charge including carriage of mat Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 30, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysNov 06, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender