Tender For Completion Of Balance Work Of Road From Eidgah (Marhote) To Rajara Via Grang Choudharian, Tehsil Surankote, District Poonch ) By Way Of Earth Work In Cutting, Cross Drainage, Walling, Providing And Laying Of 150Mm Thich Wbm Grade-Ii,75Mm T
Tender Value
3.07 Crore
Estimated cost
Bid Submission
06 Nov 2026
2 days left
EMD
6.15 Lakhs
Bank guarantee accepted
Document Fee
6000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Poonch → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Completion Of Balance Work Of Road From Eidgah (Marhote) To Rajara Via Grang Choudharian, Tehsil Surankote, District Poonch ) By Way Of Earth Work In Cutting, Cross Drainage, Walling, Providing And Laying Of 150Mm Thich Wbm Grade-Ii,75Mm Thick Wbm Grade-Iii And 50Mm Bm And 25Mm Thick Ogpc In Km 1St Rd 0 To Km 3Rd Rd 1000, Under Nabard Ridf Xxvii. I. Earth Work = Km 1St Rd 0 To Km 3Rd Rd 1000 , L=6.00 Kms Ii.Hume Pipe Culverts= As Per Location Chartiii. Reinforced Cement Concrete Culverts = As Per Location Chart Iv. Walling= = As Per Location Chartv. Protection Work = As Per Location Chart
BOQ
| Sl. No. | Item Description |
| 1 | Supplying and stacking at site Graded crushed stone aggregate of size |
| 2 | 63 mm to 45 mm |
| 3 | 53 mm to 22.4 mm |
| 4 | Stone Screening of size |
| 5 | 13.2 mm nominal size (Type A) |
| 6 | 11.2 mm nominal size (Type B) |
| 7 | Moorum |
| 8 | Laying, spreading and compacting stone aggregate of specified sizes to WBM specifications in uniform thickness, hand picking, rolling with 3 wheeled road / vibratory roller 8-10 tonne capacity in stages to proper grade and camber, applying and brooming requisite type of screening /binding material to fill up interstices of coarse aggregate, watering and compacting to the required density. |
| 9 | Providing and applying tack coat using bitumin emulsion confirming to IS 8887 using emulsion pressure distributer including preparing the surfsce and cleaning with machenical broom with rapid setting bitumin emulsion on WBM @ 0.4kg per Sqm (priming coat) |
| 10 | Providing and applying tack coat using hot straight run bitumen of grade –VG-10, including heating the bitumen, spraying the bitumen withmechanically operated spray unit fitted on bitumen boiler, cleaning and preparing the existing road surface as per specifications. |
| 11 | On W.B.M. @ 0.75 Kg/sqm. |
| 12 | Providing and laying bituminous macadam using crushed stone aggregates of specified grading premixed with bituminous binder, transported to site by tippers, laid over a previously prepared surface with paver finisher equipped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers as per specifications to achieve the desired compaction and density, complete as per specifications and directions of Engineer-in-Charge 16.63.1A 50 to 100 mm average compacted thickness with bitumen of grade VG-10 @ 3.5% (percentage by weight of total mix) prepared in Batch Type Hot Mix Plant of 100-120 TPH capacity. |
| 13 | 2.5 cm premix carpet surfacing with 2.25cum and 1.12 cum of stone chippings of 13.2 mm and 11.2mm size respectively per 100 sqm and 52 kg and 56 kg of hot bitumen per cum of stone chippings of 13.2 mm and 11.2 mm size respectively including a tack coat with hot straight run bitumen including consolidation with road roller of 6 to 9 tonne capacity etc. complete (tack coat to be paid for separately).With paving Asphalt grade VG-10 heated and then mixed with solvent at the rate of 70 grams per kg of asphalt. |
| 14 | Providing and laying seal coat of premixed fine aggregate (passing 2.36 mm and retained on 180 micron sieve) with bitumen using 128 kg of bitumen of grade VG-10 bitumen per cum of fine aggregate and 0.60 cum of fine aggregate per 100 sqm of road surface including rolling and finishing with road all complete |
| 15 | Providing and applying 2.5mm thick road marking strips (retro-reflective) of specified shade/colour using hot thermoplastic material by fully/semiautomatic thermoplastic paint applicator machine fitted with profile shoe,glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour,T&P, cleaning the road surface of all dirt, seals, oil, grease and foreign material etc. complete as per direction of Engineer-in-charge and accordance with applicable specifications |
| 16 | Providing and fixing precast reinforced cement concrete 1:1.5:3 ( 1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size) kilometer stone as per standard design including finishing smooth in 1:3 cement mortar ( 1cement : 3 fine sand) but excluding the cost of earth work, concrete in foundation, painting and lettering etc. which shall be paid for separately.50x152.5x25 cm size. |
| 17 | Manufacturing supplying and fixing retro reflective sign boards made up of 2mm thick aluminum sheet, as per IRC : 67-2001, M.S. angles of size 35x35x5mm to a vertical post made upto M.S. Tee section ISMT 50x50x6mm welded with base plate of size 100x100x5mm at the bottom end and including making holes in pipes, angle flats, providing and fixing M.S. message plate of required size steel work to be painted with two or more coats of synthetic enamel paint of required shade and of approved brand & manufacture over priming coat of zinc chromate yellow primer (vertical M.S.-Tee support to be painted in black and white colours). Backside of aluminum sheet to be painted with two or more coats of epoxy paint over and including appropriate priming coats including all leads and lifts etc. complete as per drawing, specification and direction of Engineer-in-charge.Mandatory/Regulatory sign boards of 900 mm diameter with part as length of 3750 mm. |
| 18 | Carriage of material by M.T incl loading/unloading & stacking complete |
| 19 | Stone agg. 63mm to 45mm/53mm to 22.4 size avg. lead 11 km by MT |
| 20 | Stone Screening avg lead 11 km by MT Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 29, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 06, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysNov 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender