Tender For Face Lifting/ Upgradation Of Divisional / Sub-Divisional Offices Of Kpdcl For Ed-Iv Srinagar. (Adv. Cost Rs. 4.87 Lacs) (Incl Cost Of Material+Gst)
Tender Value
4.87 Lakhs
Estimated cost
Bid Submission
06 Nov 2026
4 days left
EMD
9740
Bank guarantee accepted
Document Fee
200
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Srinagar → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Face Lifting/ Upgradation Of Divisional / Sub-Divisional Offices Of Kpdcl For Ed-Iv Srinagar. (Adv. Cost Rs. 4.87 Lacs) (Incl Cost Of Material+Gst)
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling wooden boardings in lining of walls and partitions, excluding supporting members but including stacking within 50 meters lead Thickness above 10 mm upto 25 mm |
| 2 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead For thickness of tiles above 25 mm and upto 40 mm. |
| 3 | Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-incharge:1 1:3:6 or richer mix (i/c equivalent design mix) |
| 4 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete |
| 5 | Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position : Budloo / Fir wood(planks) |
| 6 | Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS:277 and consisting of angle cleats of size 25 mm widex1.6mm thick with flanges of 27mm and 37 mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x40mm long with 6 mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.5mm of required length with nuts & bolts of required size and other end of angle hanger fixed with G.I. channels 45x15x0.9 mm running at the spacing of 1200 centre to centre, to which the ceiling section 0.5mm thick bottom wedge of 80mm with tapered flanges of 26 mm each having clips of 10.5 mm at 450mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64mm diaX230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5mm thick 27mm high having flanges of 20mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre to centre, with 25mm long drive-all screws @ 230 mm interval ,including fixing of gypsum board/calcium silicate board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5x25mm at 230mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the gypsum board with recommended jointing compound, jointing tapes, finishing with jointing compound in 3 layers covering upto 150mm on both sides of joint and two coats of primer suitable for board, all as per manufacturers’ specification and also including the cost of making openings for light fittings, grills diffusers, cutouts made with frame of perimeter channels suitably fixed all complete as per drawing and specification and direction of the Engineer-in-Charge but excluding the cost of painting with:12.5 mm thick tapered edge gypsum moisture resistant board |
| 7 | Providing and fixing Venetian/roller type blind curtain of approved make and shade, manufactured from high-quality, durable material, complete with head rail/cassette, operating mechanism, brackets, side channels/chains/cords as required, all necessary fittings and accessories, including cutting, fixing, adjustment and testing, complete in all respects as directed by the Engineer-in-Charge. |
| 8 | Providing and fixing approved quality decorative wall paper of approved make, design, colour and pattern, over prepared internal wall surface, including cleaning and preparation of surface, application of suitable primer/sealer and adhesive, cutting, matching of pattern, fixing and pressing of wall paper without wrinkles, bubbles or joints, trimming at edges and corners, and all necessary materials, labour, tools and tackles, complete in all respects as directed by the Engineer-in-Charge. |
| 9 | Providing and fixing PVC wall dado of approved make, colour, shade and pattern, comprising 6 mm thick PVC decorative panel/sheet, fixed over a properly prepared surface with 12 mm thick BWP/BWR plywood backing, using approved adhesive and suitable screws/fasteners, including necessary cutting, fitting, jointing, edge finishing, corner profiles/beading, and all necessary accessories, complete in all respects as per approved design and instructions of Engineer-in-Charge |
| 10 | Providing and fixing of 12 mm Thick HDF Laminate Flooring with an AC4 abrasion class rating of approved brand including base foam 2mm thick & corner /Toe beading ,nails wherever required as directed by EIC ,nails etc complete job |
| 11 | Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 2mm |
| 12 | Finishing walls with textured exterior paint of required shade on New work (two or more coats applied @ 3.28 liter/10sqm) over and including base coat of exterior primer applied @ 2.20kg/10sqm |
| 13 | Providing & laying in position cement concrete of specified grade excld. The cost of centring and shuttering all work upto plinth level(1:4:8 coarse sand 40mm nominal size crushed stone agg.) |
| 14 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 15 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete Size of tile 600x600 mm |
| 16 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by themanufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size asapproved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 17 | P/F of thermo heated water geyser of approved brand havels or equivalent incl. necessary fiting 50 ltr. |
| 18 | Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. White vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests. |
| 19 | Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge PN-16 pipe, 16mm OD(SDR-7.4) 16mm nominal outer dia pipes. |
| 20 | Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying :(a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253kg/ sqm. This layer will be allowed to air cure for 4 hours.(b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm . This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry. |
| 21 | Providing and fixing of pvc prince pipes of approved make ) in proper graident in excavated trenches including jointing and refilling the excavated material complete including cost of excavation as directed by eic. |
| 22 | 100mm |
| 23 | Construct brick masonry man hole in cement mortar 1:4 ( 1 cement :4 coarse sand ) 4 graded stone aggregates 20mm nominal size ) foundation concrete (1:4:8) inside plastering 12mm thick with cement mortar 1:3 (1 cement: 3 coarse sand) finished with floating coat of neat cement and making channel in cement concrete 1:2:4. 1 cement 2 coarse sand 4 graded stone 20mm nominal size finished with a floating coat of neat cement complete.including size 45 x 45 x 45 deep including C.I.manhole cover medium duty with frame of size 45 x45mm size .with f.p.s bricks with class designation 75 and with crushed stone aggregates complete in all respect. |
| 24 | Providing and fixing 15 mm nominal bore C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. |
| 25 | Providing and fixing of air out exhaust fan of approved quality with all nessasary fitting placing in postion complete in all respect |
| 26 | Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931 |
| 27 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backin Rectangular shape 453x357 mm |
| 28 | p/fixing of lighting point including wiring for lighing point in 1.5mm sq.mm pvc insulated copper wire and 2.5mm sq pvc insulated multistrand copper wire for lightingsub mains 6 amp one way switch.2mm thick pvc conduit/channael with bends .junction boxes etc,6Amp S.pole MCB,10 AMP DP MCN.2 WAY DBFOR HOUSING MCB AND HYLEM SHEETS WITH WOODEN BOX RECESSED IN WALLS ACCESSORIES OF REQUIRED BRAND AND MANUFACTURE |
| 29 | P/F of HEATING point including wiring for HEATING point in 2.5mm sq.mm pvc insulated copper wire and 4MMmm sq pvc insulated multistrand copper wire for HEATING POINT sub mains 16 amp SWITCH SOCKET 2mm thick pvc conduit/channael with bends .junction boxes etc,10 Amp S.pole 32 MCB,10 AMP DP MCN.2 WAY DBFOR HOUSING MCBAND HYLEM SHEETS WITH WOODEN BOX RECESSED IN WALLS ACCESSORIES OF REQUIRED BRAND AND MANUFACTURE |
| 30 | CARRIAGE |
| 31 | Sand Avg 25 Km by MT |
| 32 | Stone aggregate for avg lead of 25km Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 29, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 06, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 4 daysNov 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender