Tender For Providing Of Associated Work For Solid Waste Mgt Plant For Leimakhong Mil Stn
Tender Value
43 Lakhs
Estimated cost
Bid Submission
19 Nov 2026
0 days left
EMD
86000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
leimakhong → Manipur
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Providing Of Associated Work For Solid Waste Mgt Plant For Leimakhong Mil Stn
BOQ
| Sl. No. | Item Description |
| 1 | Surface excavation n.exc 30 cm deep and averaging 15cm deep and getting out any type of soil complete all as specified and as directed. |
| 2 | Material and labour for Hardcore of Broken stone or boulders of gauge n exc.63mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and well rammed to a true surface complete all as specified and as directed. |
| 3 | Material and Labour for Cement concrete 1:4:8 type D2 using 40 mm graded crushed stone aggregates in foundation filling and mass concrete / in post hole and sub base complete all as specified and as directed. |
| 4 | Material and labour for PCC (1:2:4) type B0 using 12.50 mm graded stone aggregate as in in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating including necessary use anf waste formwork complete all as specified and as directed. |
| 5 | Material and labour for rendering 5mm thick in cement mortar 1:4 over a backing coat of 10mm thick in CM 1:6 on concrete or brick masonry surfaces and finishing the top surface even and smooth without using extra cement complete all as specified and as directed. |
| 6 | Materials and labour for preparation of new plastered surfaces of walls and applying two coats of cement base paint over a coat of white cement primer complete all as specified and as directed. |
| 7 | Material and labour for machine pressed precast concrete interlocking paver block coloured red and yellow, any shape and size confirming to IS 15658-2006 of 80mm thickness, M-40 grade with grey cement and pigment including 50mm thick sand cushioning complete all as specified and as directed |
| 8 | Removal of excavated material (soil) to a distance n.exc 50 mtr and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and as directed. |
| 9 | Excavation in post holes (or similer holes) each n.exc 0.5 Cum getting out, returning filling and ramming earth or broken rubble mixed with earth around, in layers n.exc 25 cm watering and removing surplus soil to a distance n.exc. 50 m and making good the disturbed surface in any type of soil complete all as specified and as directed. |
| 10 | Supply and fixing mild steel work in tubular trusses i.e truss bottom, top bend, sides, side supports, holding plates, posts and base plate etc. including special shaped washers etc complete using ERW or induction butt welded tubes conforming to IS 1161-1998 grade St-240 etc complete all as specified and as directed . |
| 11 | Supply and fixing of mild steel framed work such as grills, gratings, etc.. with ends of bars or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe 290 Gde-E-165 complete all as specified and as directed. |
| 12 | Supply and fixing rolled mild steel plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment confirming to Fe-410-W (Gde E-250) quality- B complete all as specified and as directed. |
| 13 | Material and labour for preparation of new steel surfaces exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed. |
| 14 | Supply and fixing 0.50mm thick pre-painted galvalume aluminium Zinc coating GI based corrugated / semi corrugated steel sheet of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws with bitumen rubber washer as per manufacturer's instruction complete all as specified and as directed. |
| 15 | Supply and fixing 0.50mm thick pre-painted galvalume aluminium Zinc coating GI based plain steel of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws with bitumen rubber washer as per manufacturer's instruction complete all as specified and as directed. |
| 16 | Excavation in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in any type of soil etc complete all as specified and as directed. |
| 17 | Returning, filling in including spreading and levelling watering and well remming in layeres n. exc. 25cm thick complete all as specified and directed. |
| 18 | Material and labour for Moorum/red bajri filling in floors or pavings , laid in layers n exe 150 cm thick (Compacted thickness) ,spread, levelled ,rammed including watering complete all as specified and directed. |
| 19 | Material and labour PCC 1:3:6, type C-2 (using 40mm graded stone aggregate) as in walls or retaining walls,any thickness, size or shape including pilasters, buttresses, columns, pillars,boundary pillars and posts(including caps and bases) complete all as specified and as directed. |
| 20 | Material and labour for brick work with sub class `B` bricks, old size, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and as directed. |
| 21 | Material and labour 75mm thick PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in sub base complete all as specified and directed. |
| 22 | Material and labour 40mm thick PCC 1:1.5:3, M-20, nominal mix, type B-1 (using 20 mm graded stone aggregate as in flooring complete all as specified and directed. |
| 23 | M &L for 3mm thick glass diving strip of width 38mm, inserted in position as per direction of Engineer-in-Charge complete all as specified and as directed. |
| 24 | Material and labour 10mm thick rendering in cement mortar (1:6) on any face of brick walls or concrete surfaces, finished the surfaces even and smooth without using extra cement complete all as specified and as directed. |
| 25 | Material and labour for rendering 5mm thick in cement mortar 1:4 over a backing coat of 10mm thick in CM 1:6 on concrete or brick masonry surfaces including mixing water proofing compound @3% by weight of cement in top coat and finishing the top surface even and smooth without using extra cement complete all as specified and as directed.Note: Water proofing compound will be measured and paid separately. |
| 26 | Supply only integral water proofing compound (WPC) of best quality (ISI marked). |
| 27 | Material and labour for preparing newly plastered wall surfaces and applying three coats of white washing complete all as specified and as directed. |
| 28 | S & F Welded steel wire fabric of weight not exc 4 Kg per Sqm and fixed complete to wood or steel members complete all as specified and as directed. |
| 29 | Supply and fixing 300mm long mild steel sliding door bolts with hasp and staple, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and as directed. |
| 30 | Supply and fixing Mild steel barrel tower 200 mm long bolts, stove enamelled black, with bright bolt complete all as specified and as directed. |
| 31 | Supply and fixing 125mm long pressed steel handels, oval type, stove enamelled black complete all as specified and as directed. |
| 32 | Supply and fixing 100mm long cold rolled mild steel Butt hinges, heavy weight, complete all as specified and as directed. |
| 33 | Material & Labour for 75mm thick, PCC 1:3:6, Type C-2, using 40mm graded aggregate as in Plinth protection etc surface finished even and fair without using extra cement and providing necessary joints 12mm wide to the full depth of PCC at every 3 meters and every change of directions and the joints duly filled with mastic filling comprising of 01 Part of heated bitumen blown grade any penetration and 3 parts of sand [all by weight] complete all as specified and as directed. Materials and labour for earthing complete with galvanised iron earth plate electrode 600 mm x 600 mm x 6 mm thick, burried directly and preferably vertically in ground, earth pit not less than 2.25 Mtr deep below ground level with top edge of the plate not less than 1.5 m below ground level connetced with galvanised wire of 4mm dia by means of nuts, bolts, check nuts and washers made of galvanised iron or steel earthing lead to be protected by galvanised iron pipe of 15mm bore (light grade) and other end connected to earthing test point or lightening arrestor or main controlling switch as directed including providing funnel with 20mm bore galvanised iron pipe (medium grade), wire mesh, charcoal or coke and common salt in alternate layer of 15cm (compacted thickness) all round the earth electrode, concrete earth pit in PCC (1:3:6) type C-1 (with 20mm graded aggregate), 50mm thick precast RCC (1:2:4) cover slab (re-inforced with 8mm dia TMT bar @ 15 cm C/C bothways and suitable handle made of 10mm dia) including necessary earth work in excavation, returning filling and removal of surplus earth upto a distance not exceeding 50 m etc all as shown on electrical plate No. 3 of MES Schedule Part-I(2009) complete including testing on completion including taking down old unserviciable earthing set all as specified and as directed.Notes:-(i) Main earthing strip from earth plate electrode to rest point upto length of 7.5 meters length shall deemed to be included in the unit rate quoted against this item. (ii) On testing after completion if the desired resistenance is not obtained the contractor shall redo the earthing without any extra cost to the department. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 29, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 19, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodayNov 26, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender