Tender For Upgradtion Of Certain Omqs And Add/Alt To Dog Kennel At Jammu Under Ge (Af) Jammu
Tender Value
34.69 Lakhs
Estimated cost
Bid Submission
19 Nov 2026
19 days left
EMD
70000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jammu → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Upgradtion Of Certain Omqs And Add/Alt To Dog Kennel At Jammu Under Ge (Af) Jammu
BOQ
| Sl. No. | Item Description |
| 1 | S&F WPC board 18-20mm thick,one side UV printed designing and back side plain colour printed(weight of board should be 11-12kg per sqm of board) for cup board or kitchen cabinet Front and sides of cabinate boxes and Frame full size fitted under cooking platform and other platform including fittings and including dismantling boarding, any description, fixed in any position with screws etc complete all as specified and directed By Engg-in-charge |
| 2 | S&F WPC board 18-20mm thick,both side plain colour printed(weight of board should be 11-12kg per sqm of board) for cup board or kitchen cabinet self ,drawer, fitted under cooking platform and other platform including fittings and dismantling boarding, any description, fixed in any position with screws etc complete all as specified and directed By Engg-in-charge |
| 3 | S&F WPC board 12mm thick,both side plain colour printed(weight of board should be 5-6kg per sqm of board) for cup board or kitchen cabinet back side shutter fitted under cooking platform and other platform including fittings and dismantling boarding, any description, fixed in any position with screws etc complete all as specified and directed By Engg-in-charge |
| 4 | S&F 5 mm thick Printed PVC sheet in strips & channel feathered at the edges for fixing on solid WPC wall lining. Insulated WPC wall lining, and solid WPC partition inclusive of solvent cement and fixing at site.complete all as specified and directed By Engg-in-charge |
| 5 | S&F 30 mm width of flap Continous (Piano) hinges, mild steel, bright finish or electrogalvanised complete all as specified and directed By Engg-in-charge |
| 6 | S&F 40mm dia, brass polished cupboard knobs fixed with nut, screw and washer of approved brand and model by GE/ User. complete all as specified and directed By Engg-in-charge |
| 7 | S&F 140mm ball catches with 8 mm dia steel ball, and brass body and striking plate including letting in of approved brand and model by GE/ User complete all as specified and directed By Engg-in-charge |
| 8 | S&F 125 mm Powder coated Aluminium handles, fancy type, anodised of approved brand and model by GE/ User. complete all as specified and directed By Engg-in-charge |
| 9 | S&F 100 mm Powder coated Aluminium handles, fancy type, anodised. complete all as specified and directed By Engg-in-charge |
| 10 | M&L for 300x450 x7 mm thick joint free glazed ceramic tiles premium quality colored as in dado/ skirting and vertical surfaces set&jointed in neat cement slurry and pointed in colored cement over and incl 10 mm thick cement mortar 1:4 to match the Shade, pattern, laying etc of tiles including dismantling existing unservicable wall tile of any description.complete all as specified and directed By Engg-in-chargeNote:- Design, colour shall be approved by GE/User. |
| 11 | M&L for 15mm thick cement plaster on fair faces of brick work/stone work on Walls in cement mortar 1:6, on concrete surface finished even and smooth without using extra cement,necessary formwork scaffolding required upto the 4th story including applying two coats of Interior Emulsion over a coat of primer and 2-3 mm wall care putty and including taking down cement plaster on brick/concrete surfaces etc including racking out joints, hacking for keys and scrubbing down with water etc and removing all debris to a distance exc 50 mtr but not exc 100 mtrs,necessary formwork scaffolding required upto the 6th story complete all as specified and directed By Engg-in-charge |
| 12 | M&L for Kota stone slab 20-25mm thick in riser of steps in single pieces, skirting, dado,pillar and floor laid over 20 mm CM 1:4 cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including roughening & hacking out old finishes, rubbing grinding and mirror polishing complete all as specified and as directed by Engr-in-charge. |
| 13 | M&L for PCC 1:4:8 type D-2(40 mm graded stone agg) as Foundation, Filling, mass concrete to fdn etc complete all as specified and as directed by Engr-in-charge. |
| 14 | M&L for RCC M25 as in footing /plinth beam including required formwork complete all as specified and as directed by Engr-in-charge. |
| 15 | M&L for RCC M25 as in lintel / roof beam including required formwork complete all as specified and as directed by Engr-in-charge. |
| 16 | M&L for RCC M25 as in columns including required formwork etc complete all as specified and as directed by Engr-in-charge. |
| 17 | M&L Brick work with sub class 'B' bricks (Old size bricks) straight or curved on plan exc 6m mean radius with old size bricks built in cement mortar 1:4 for manhole etc in same mortar as the work proceeds. complete all as spd and directed by Engr-in-charge. |
| 18 | M&L for Rendering 15mm thick cement plaster in cement mortar 1:4 including Waterproofing compound on fair face of brick work or concrete surface, finished even and smooth without using extra cement, including using liquid water proofing compound as per manufacturer instructions and including preparation of new plastered surfaces of finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as spd and directed by Engr-in-charge. |
| 19 | M&L for 300x600 x(7 to 8) mm thick coloured (Light & Dark Shade) glazed ceramic tiles of premium quality as in dado/ skirting and vertical surfaces set & jointed in neat cement slurry and pointed in colored cement over and incl 10 mm thick cement mortar 1:4 to match the Shade, pattern, laying at site including taking down of existing tile/plaster/terrazo dado including removal of debris out of the defence line at govt approved dumping area and no extra cost will be paid for the same complete all as spd and directed by Engr-in-charge. |
| 20 | Taking down chowkhats or frames not exc. 1.5 sq. m each with shutters (without taking off shutters from the frames) complete all as specified and directed By Engg-in-chargeNote:- Including make good the Jam of window/Door to receive new door/window also no extra payment should be made to the contractor. |
| 21 | Taking down Chowkats or frames exc 1.5 sq. m but n exc 4 sq m each with shutters (without taking off shutters from the frames)complete all as specified and directed By Engg-in-chargeNote:- Including make good the Jam of window/Door to receive new door/window also no extra payment should be made to the contractor. |
| 22 | S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) frame work for doors,windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size,including necessary filling up the gaps at junctions, i.e. at top,bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws,includinng taking down existing.all complete as per architectural drawings and the directions of Engineer-in-Charge |
| 23 | S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws.includinng taking down existing .complete all as per architectural drawings and the directions of Engineer-in-charge. |
| 24 | M&L for Anodised Aluminium Grill (anodised transparent or dyed to required shade according to IS:1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the window frame with C.P. brass/ stainless steel screw @150 mm centre, including cutting the grill to proper opening size for fixing and operation of handleS&Fixing approved aluminium standard section around the opening, all complete as per requirment and direction complete all as specified and directed By Engg-in-charge |
| 25 | S&F in repair 5.5mm thick, ordinary quality and glazing with rouber beading, joining cleat etc in squar n exc 0.5 sq. m in each pane complete all as specified and as directed bu Engr-in-charge. |
| 26 | Excavation in trenches in any type of soil n.exc 1.5m wide and n.exc 1.5m depth in foundations etc for manholes, sewage line and and getting out complete all as spd and directed by Engr-in-charge. |
| 27 | Returning filling in (soil) including spreading, levelling, watering and well ramming in layers n.exc 25cm thick in any type of soil complete all as spd and directed by Engr-in-charge. |
| 28 | Removal of excavated material (soil) to a distance n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point complete all as spd and directed by Engr-in-charge. |
| 29 | M&L for TMT bars 10 mm dia and over cut length bent to shape required including cranking bending spirally for hooping for column , hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia complete all as spd and directed by Engr-in-charge. |
| 30 | Ditto all as per above item 8 mm dia in stirrups spacers and binders etc.complete all as spd and directed by Engr-in-charge. |
| 31 | SCHEDULE 'A' PART-II (Schedule of credit) Credit amount of Rs (Refer schedule of credit) for retrieved material mentioned in Sch 'A' Part-II of Tender documents in PDF form will be deducted offline during acceptance of tender of lowest bidder. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 29, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 19, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 19 daysNov 26, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 26 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender