Tender For Construction Of Market Tinto / Shed, Parking / Pavers / Beautification And For Sports Activities (Badminton / Volleyball Courts) Under Goa Liberation Fund In Survey No. 2/5 Of Village Cavelossim, Salcete - Goa.
Tender Value
40.30 Lakhs
Estimated cost
Bid Submission
10 Nov 2026
11 days left
EMD
80603
Bank guarantee accepted
Document Fee
6000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
goa → Goa
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Market Tinto / Shed, Parking / Pavers / Beautification And For Sports Activities (Badminton / Volleyball Courts) Under Goa Liberation Fund In Survey No. 2/5 Of Village Cavelossim, Salcete - Goa.
BOQ
| Sl. No. | Item Description |
| 1 | Earthwork in excavation by mechanical means (hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sq.m on plan) incl. disposal of excavated earth, lead up to 50 m and lift up to 1.5 m; disposed earth levelled and neatly dressed incl. barricading, danger lighting, guarding as directed (b) All types of Ordinary rock including all types of laterite rock, blasting prohibited |
| 2 | Earthwork in excavation by mechanical means (hydraulic excavator)/manual means in foundation, pipeline trenches, drain (not exceeding 1.5 m in width or 10 sq.m on plan) incl. dressing of sides and ramming of bottoms, lift up to 1.5 m incl. getting out excavated soil and disposal of surplus. (b) All types of Ordinary rock including all types of laterite rock, blasting prohibited |
| 3 | Laterite masonary in neatly dressed stones for 23cm thick masonary walls in CM 1:5 (1cement :5 coarse sand) in foundation up to plinth extra for laterite masonary in SS |
| 4 | Providing and laying in position cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded granitic or basaltic stone aggregate 40 mm nominal size) excluding cost of centering, shuttering and finishing (a) All works up to plinth level |
| 5 | Providing & laying cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded granitic or basaltic stone aggrt. 40 mm nominal size) excluding cost of centering, shuttering and finishing |
| 6 | Supplying and filling in plinth with moorum or earth under floors incl. watering, ramming, consolidating and dressing complete. Moorum |
| 7 | Providing anti-termite treatment to buildings conforming to I.S.S. 6113 part II 1971 (revised) incl. precautions for health hazards and safety measures, with guaranty for min. 10 years from date of completion incl. eradicating any infestation free of cost during guaranty period (payment on plinth of the building) (a) Pre-construction |
| 8 | Centering & shuttering incl. strutting, propping & removal of forms for (i) Foundations, Footings, Bases for columns |
| 9 | (iv) Sides and Soffits of beams, Beam Haunchings, Cantilever, Girders, Bressumers and Lintels, plinth beams not exceeding 1 m in depth |
| 10 | (xiii) Suspended floors, roofs, landings, shelves & their supports |
| 11 | Providing and laying in position (1:1½:3) reinforced cement concrete excluding cost of centering, shuttering, finishing and reinforcement (1 cement : 1½ coarse sand : 3 graded stone agg. 20 mm nominal size) (c) In beams, suspended floors, roofs having slope up to 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases up to floor five level |
| 12 | Providing TMT steel reinforcement (conforming to IS 1786 of 1986) for RCC work incl. bending, binding & placing in position in all floors along with factory made precast concrete cover blocks of specified sizes whose compressive strength is not less than that of surrounding concrete in the structural member |
| 13 | Laterite masonry in neatly dressed stones of size as specified in cement mortar 1:5 (1 cement : 5 coarse sand) in foundation and basement |
| 14 | Laterite masonry in neatly dressed stones for 20 cm thick masonry walls in cm 1:4 (1 cement : 4 coarse sand) in foundation up to plinth level; Extra for laterite masonry in all sizes in superstructure from floor I level up to floor V level |
| 15 | 12 mm cement plaster 1:4 (1 cement : 4 fine sand) |
| 16 | 6 mm cement plaster to ceiling 1:3 (1 cement : 3 fine sand) |
| 17 | Finishing fine with neeru over plaster (Qty same as Item 14+15) |
| 18 | 18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement : 5 coarse sand) and top layer 6 mm thick cement plaster 1:3 (1 cement : 3 coarse sand) finished with sponge |
| 19 | Distempering two or more coats with oil bound washable distemper of approved brand and manufacture and of required shade on new work over and including a priming coat with distemper primer, to give an even shade (Qty same as item no 16) |
| 20 | Painting three or more coats with acrylic exterior paint of approved brand (such as Dulux / Asian Paints / Sherwin Williams) incl. one coat of cement primer and one coat of surface treatment etc. complete (Qty same as item no 20) |
| 21 | Providing and fixing vitrified antiskid tiles (320x320) and 10 mm thick tiles in floor, treads of steps, landing on 25 mm thick bed of cement mortar 1:3 and jointed with cement slurry complete (9069 Precast plain) |
| 22 | Providing and fixing coloured ceramic tiles Spartek or equivalent of 8\\" x 8\\" size and 6 mm thick in floors, thread of steps and landing on 25 mm thick bed of cement mortar 1:3 and jointed with cement slurry complete |
| 23 | Providing and fixing coloured ceramic tiles Spartek or equivalent of 8\\" x 8\\" size and 6 mm thick in skirting and dados on 12 thick cement plaster 1:3 (1 cement : 3 coarse sand) and jointed with cement slurry complete |
| 24 | Providing and laying factory made shot-blasted cement concrete interlocking paver block of minimum M35/M40 grade made by heavy duty block making machine with strong vibratory compaction, of approved size and design/shape, laid in 50 mm thick compacted bed of coarse sand, filling joints with coarse sand etc. all complete as per direction of Engineer - in I, Wave, Rectangular, Square etc. shapes. Products to comply to IS 15658:2006 and manufactured by ISO 9001:2008 certified plant. Shot blasting to be done using 0.4-0.5 mm dia steel shots at 3200 rpm. (a) 60 mm thick in all colours except grey{M35 grade} s |
| 25 | Providing woodwork in frames of doors, windows, clerestory windows, trusses & other frames wrought, framed and fixed in position. (d) Second class matti wood |
| 26 | Providing and fixing flush door shutters, commercial type, core of block board construction with frame of first class hard wood and well matched commercial ply veneering and vertical grains or cross bands and face veneers on both other faces of shutters. (b) 35 mm thick including anodized aluminium butt hinges with necessary screws. |
| 27 | Two track sliding window (Heavy): Providing & fixing two track sliding window, Yashashri make or equivalent, in heavy sections made out of 104x51x2.5 mm UPVC multi-cavity track section & shutter made out of 45x54x2.5 mm UPVC multi-cavity section welded in corners with glass beading & EPDM gasket & 4 mm clear glass with lock & rollers. Average weight 16.75 kg per sq m. Sections tested using BS 2782 & DIN 53459 test methods. Plain Glass. |
| 28 | Providing and fixing M.S. grill of required pattern in wooden frames of windows etc. with M.S. flats, square or round bars with round headed bolts and nuts or screws |
| 29 | (b) Ornamental Grill |
| 30 | Applying priming coat with ready mixed primer of approved brand and manufacture on steel work |
| 31 | Painting two or more coats (excluding priming coat) with superior quality ready mixed paint for steel work of approved brand & manufacture in all shades on new work to give an even shade |
| 32 | Providing and fixing white vitreous china pedestal type (European type) water closet with seat & lid, C.I. brass hinges and rubber fittings, 15 ltr white vitreous china low level flushing cistern with fittings, brackets, 40 mm white porcelain enameled flush bend, 25 mm overflow pipe with specials and mosquito proof coupling of approved municipal design complete, incl. cutting and making good walls and floors (b) W.C. pan with black plastic seat and lid |
| 33 | Providing and fixing vitreous china wash basin with RS or C.I. brackets painted white, 15 mm C.P. brass pillar taps, C.P. brass chain with rubber plug, 32 mm C.P. brass waste of pattern, 32 mm dia M.I. or C.P. brass trap and union complete, incl. cutting and making good walls. (c) Flat back wash basin size 550 x 400 mm with a pair of single 15 mm C.P. brass pillar taps |
| 34 | Providing and fixing rigid PVC S.W.W. (soil, waste & rain water drainage pipes) of approved make incl. lubricant etc. complete (single/double) socketed |
| 35 | 110 mm dia |
| 36 | 75 mm dia |
| 37 | Providing and fixing rigid PVC bend (approved make) for S.W.R. pipes incl. lubricating etc. complete, bend with door |
| 38 | 110mm dia. |
| 39 | 75mm dia. |
| 40 | Providing and fixing rigid PVC bend of required degree (approved make) for S.W.R. drainage pipes incl. lubricating |
| 41 | 110mm dia. |
| 42 | 75mm dia. |
| 43 | Providing and fixing single 'Y' of rigid PVC (approved make) for S.W.R. pipes incl. lubricating etc. complete, with door |
| 44 | 110mm dia. |
| 45 | 75mm dia. |
| 46 | Providing and fixing single Tee of rigid PVC (approved make) for S.W.R. pipes incl. lubricating etc. complete, with door |
| 47 | 110mm dia. |
| 48 | 75mm dia. |
| 49 | Providing and fixing nahani trap of rigid PVC (approved make) for S.W.R. pipes incl. lubricating etc. complete, without door. a) 110 mm dia |
| 50 | Providing and fixing U.P.V.C. pipe clips (approved make) for S.W.R. pipes |
| 51 | 110mm dia. |
| 52 | 75mm dia. |
| 53 | Providing and fixing R.P.V.C. vent cowl |
| 54 | 110mm dia. |
| 55 | 75mm dia. |
| 56 | Constructing brick masonry manhole or inspection chamber with second class bricks in cement mortar 1:5, R.C.C. top slab 1:2:4, {1 cement: 2 coarse sand: 4 graded stone aggrgate, 20 mm nominal size } foundation concrete 1:2:4, {1 cement: 2 coarse sand: 4 graded stone aggrgate, 40 mm nominal size} inside plastering 12 mm thick cement mortar 1:3 {1 cement:3 coarse sand} finished with floating coat of neat cement and making channels in cement concrete 1:2:4, {1 cement: 2 coarse sand: 4 graded stone aggrgate, 20 mm nominal size } neatly finished |
| 57 | (a) Inside size 90x80 cm and 45 cm deep incl. C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame not less than 38 kg (weight of cover 23 kg) |
| 58 | (d) Inside size 60x60 cm and 60 cm deep incl. C.I. cover with frame (light duty) 455x610 mm internal dia, total weight of cover and frame not less than 38 kg (weight of cover 23 kg) |
| 59 | Making soak pit 2.5 m dia 3 m deep with 45x45 cm dry brick honey comb shaft and S.W. drain pipe 100 mm dia, 1.8 m long complete filled with laterite stone aggregate 125 to 180 mm surrounded by laterite stone aggregate of 40 mm and down gauge as per standard design |
| 60 | Providing and fixing CPVC pipes conforming to IS:15778, thermal stability for hot and cold water supply incl. all CPVC plain and brass threaded fittings, fixing pipes with clamps at 1 m spacing, jointing with one step CPVC solvent cement and testing of joints. Concealed work (medium duty SDR 13.5 pipe) incl. cutting chases and making good the walls etc.(a) 15 mm dia nominal outer dia pipes |
| 61 | Providing and fixing CPVC pipes conforming to IS:15778, thermal stability for hot and cold water supply incl. all CPVC plain and brass threaded fittings, CPVC solvent cement, trenching, refilling and testing of joints. External work (heavy duty SDR 11 pipe) |
| 62 | (b) 20 mm nominal outer dia pipes |
| 63 | (c) 25 mm nominal outer dia pipes |
| 64 | Providing and fixing nickel chrome plated copper alloy fancy LONG BODY BIB cock with wall flange, Jaquar make or equivalent (a) 15 mm nominal bore |
| 65 | Providing and fixing nickel chrome plated copper alloy fancy CONCEALED STOP COCK with sliding flange 15 mm, Jaquar make or equivalent. (a) 15 mm nominal bore |
| 66 | Providing and fixing nickel chrome plated copper alloy fancy Pillar Cock rocket type, Jaquar make ( or equivalet confirming to IS to 8931; 1993.(a) 15 mm nominal bore |
| 67 | Providing and fixing nickel chrome plated copper alloy fancy wall mixer with 115 mm long bend pipe for connection to over head shower, Jaquar make or equivalent, conforming to IS 8931:1993. WALL MIXER WITH 115 mm LONG BEND PIPE FOR CONNECTION TO OVER HEAD SHOWER |
| 68 | Providing and placing on terrace roof of floor two (1st floor roof) single piece rotational moulded polythene water storage tank having ISI mark and conforming to IS 12701:1996. (c) 1000 lit. capacity |
| 69 | Providing and fixing brass full way valve (heavy) duty with wheel of approved quality. (c) 25 mm nominal bore |
| 70 | Providing and fixing 600 x 450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick asbestos sheet ground fixed to wooden cleats with C.P. brass screws and washers |
| 71 | Providing and fixing white vitreous china water closet squatting pan (Indian type W.C. pan) size 580 mm with 100 mm sand cast iron P or S trap, 10 litres high level P.V.C. flushing cistern (approved make) with fittings, rack bolts, 32 mm dia P.V.C. telescopic flush pipe with fittings and clamps, 25 mm P.V.C. overflow pipe with specials & mosquito proof coupling of approved municipal design and nylon pull complete, cutting and making good walls and floors. (b) Orissa pattern W.C. pan |
| 72 | Providing and fixing bright finished brass tower bolts (barrel type) with screws etc. complete. (c) 150 x 10 mm |
| 73 | Providing and fixing bright finished brass door latch. (b) 100 mm |
| 74 | Providing and fixing bright finished brass door latch. (b) 250 x 16 x 5 mm |
| 75 | Providing and fixing bright finished brass sliding door bolts with nuts and screws etc. complete (b) 250 x 16 mm |
| 76 | Steel work in single sections (SAIL, TATA, VIZAG & using electrodes of Ador or ES4B or Deh Secheron make only) incl. cutting, hoisting, fixing in position and applying a priming coat of red lead paint (b) In tees, angles, flats and channels |
| 77 | Providing corrugated G.I. sheet roofing, fixed with galvanized iron J or L hooks, bolts and nuts 8 mm dia with bitumen and G.I. limpet washers filled with white lead complete, excluding cost of purlins, rafters and trusses |
| 78 | Providing ridges or hips of width 60 cm overall in plain G.I. sheet fixed with galvanized iron J or L hooks, bolts and nuts 8 mm dia, G.I. limpet and bitumen washers complete. (a) 0.80 mm thick sheet |
| 79 | Providing pre-cast cement concrete jali 1:2:4 (1 cement : 2 coarse sand : 4 stone aggregate 6 mm nominal size) reinforced with 1.6 mm dia mild steel wire incl. centering and shuttering, roughening, cleaning, fixing and finishing in cement mortar 1:3 (1 cement : 3 fine sand) all complete excluding plastering of jambs, sills and soffits (i) 50 mm thick |
| 80 | Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm with top and bottom rails of T-iron 40x40x6 mm with 38 mm dia steel pulleys, completely bolts, locking arrangement, stopper, handles incl. applying a priming coat of red lead paint Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 29, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 10, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 11 daysNov 12, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 13 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender