Tender For Annual Plan-094/2026-27-Providing Additional Facilities For The Newly Built Health Facility In Puthiyiruthy Perumpadappu Gp-General Civil Work
Tender Value
5.05 Lakhs
Estimated cost
Bid Submission
06 Nov 2026
8 days left
EMD
11472
Bank guarantee accepted
Document Fee
1015
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Malappuram → Kerala
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Annual Plan-094/2026-27-Providing Additional Facilities For The Newly Built Health Facility In Puthiyiruthy Perumpadappu Gp-General Civil Work
BOQ
| Sl. No. | Item Description |
| 1 | Ayush Holistic Center Puthiyiruthi |
| 2 | OD190397/2026-2027:Steel work in tubular (round, square or rectangular hollow tubes etc) trusses etc. including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer , including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes |
| 3 | OD190387/2026-2027:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by the Engineer in Charge ) 0.35 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade , 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15 - 18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length up to 12 meter or as desired by Engineer In Charge. The sheet shall be fixed using self drillings / self tapping screws of size (5.5 X 55mm) with EPDM seal, complete up to any pitch in horizontal / vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. |
| 4 | 13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work |
| 5 | OD190386/2026-2027:Providing and fixing 200 mm wide, square cut PVC 4kgf/cm2 rain water gutter pipe with ironbrackets with 25x5 mm size flat, screws and washers etc., including making necessaryconnections with rain water pipes etc. complete. |
| 6 | 50.18.9.7.2:Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.63 mm dia 4 Kgf/cm2 |
| 7 | 16.78.1:Construction of granular sub- base by Providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, Carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineer-in- Charge.With Material conforming to Grade - I ( size range 75 mm to 0.075 mm) having CBR Value- 30 |
| 8 | 16.68:Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M - 30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge. |
| 9 | 4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 10 | OD254139/2026-2027:LABOUR ENGAGED FOR CLEANING ,SHIFTING MATERIALS ,ETC |
| 11 | OD195379/2026-2027:Providing and fixing aluminium work for supporting frames for ACP sheet panelling work with extruded built up standard tubular sections and other sections of approved make conforming to IS : 733 and IS: 1285. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle/paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. For fixed portion Anodised aluminium (anodised transparent or dyed to required shade according to IS : 1868, Minimum anodic coating of grade AC 15) |
| 12 | OD195380/2026-2027:Modi Data 25.7, fabricating, and fixing in position Curtain Wall with Aluminium Composite Panel of 4mm or nearest thick using steel screw ,nut, bolt,washers,cleats weather sealent fastners to aluminium frame as per direction as per direction of departmental officers including coat and conveyance of all material |
| 13 | OD195378/2026-2027:Lettering in Stainless steel for Name board work including labour,material and fitting charges etc complete as per direction of Dpartmental officers at site (AREA to be measured including standard spacing between letters) |
| 14 | OD195276/2026-2027::Providing and fixing Granite of any colour and shade for Name board, of required sizelaid over base of cement mortar 1:4 ( 1 cement : 4 coarse sand), including all charges etc. complete at all,levels, including lettering & fixing Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 29, 2026
11:30 IST
Tender Published
Tender notice published.
TodayNov 06, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 8 daysNov 10, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 12 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender