Tender For Repair & maintenance Of Public Health Services In Various Govt. Houses In Sector-22 & 23 Under maintenance Booth Sector-23, Chandigarh.(Ch To: 2216 (Non Plan) maintenance And Repair.
Tender Value
6.72 Lakhs
Estimated cost
Bid Submission
05 Nov 2026
6 days left
EMD
13446
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Chandigarh → Chandigarh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair & maintenance Of Public Health Services In Various Govt. Houses In Sector-22 & 23 Under maintenance Booth Sector-23, Chandigarh.(Ch To: 2216 (Non Plan) maintenance And Repair.
BOQ
| Sl. No. | Item Description |
| 1 | Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m. |
| 2 | All kinds of soil |
| 3 | Pipes, cables etc, not exceeding 80 mm dia |
| 4 | Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia |
| 5 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : |
| 6 | Cement mortar 1:4 (1 cement : 4 coarse sand) |
| 7 | 12 mm cement plaster of mix : |
| 8 | 1:4 (1 cement: 4 coarse sand) |
| 9 | Providing and fixing soil, waste and vent pipes : |
| 10 | 100 mm dia |
| 11 | Centrifugally cast (spun) iron socket & spigot (S&S) pipe as per IS: 3989 |
| 12 | 75 mm dia |
| 13 | Centrifugally cast (spun) iron socket & spigot (S&S) pipe as per IS: 3989 |
| 14 | Providing and fixing collar : |
| 15 | 100 mm |
| 16 | Sand cast iron S&S pipe as per IS: 3989 |
| 17 | 75 mm dia |
| 18 | Sand cast iron S&S pipe as per IS: 3989 |
| 19 | Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors |
| 20 | 100 mm inlet and 75 mm outlet |
| 21 | Sand cast iron S&S as per IS: 3989 |
| 22 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. |
| 23 | 15 mm dia. nominal bore |
| 24 | 20 mm dia. nominal bore |
| 25 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : |
| 26 | 20 mm nominal bore |
| 27 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) |
| 28 | 20 mm nominal bore |
| 29 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank |
| 30 | Cutting holes up to 30x30 cm in walls including making good the same: |
| 31 | With common burnt clay F.P.S. (non modular) bricks |
| 32 | Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete so as to make it leak proof. |
| 33 | Making chases up to 7.5x7.5 cm in walls including making good and finishing with matching surface after housing G.I. pipe etc. |
| 34 | Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: |
| 35 | 100 x 100 mm size P-type |
| 36 | With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 |
| 37 | Providing & Fixing of drip seal joints to sand cast iron/ centrifugally cast (spun) iron pipes and fittings of diameter: |
| 38 | 100 mm dia |
| 39 | 75 mm dia |
| 40 | Construction of Curb consisting of cement concrete 1:2:4 including cost of C.P. hinged grating and cost of sand bajri etc. |
| 41 | Supplying and fixing in position pre-cast MD-10 RCC/SFRC Cover with frame of quality and size 450mm |
| 42 | Providing and fixing of Tank Nipple complete in all respect. |
| 43 | 20 mm dia nominal bore Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 29, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysNov 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender