Tender For Emergent Dismantling And Re-Installation Of Existing Split Type Room Air-Conditioner Machine Installed At Kit Annex Building, Kolkata-700073 In Connection With Exterior Civil Renovation Work Under Gca Electrical Section, P.W.Dte.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
18 Nov 2026
18 days left
EMD
8911
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kolkata → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Emergent Dismantling And Re-Installation Of Existing Split Type Room Air-Conditioner Machine Installed At Kit Annex Building, Kolkata-700073 In Connection With Exterior Civil Renovation Work Under Gca Electrical Section, P.W.Dte.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling and reinstallation, testing & commissioning of the 1.5/ 2.0 ton capacity split Air Conditioners indoor and outdoor unit and Supply & Installation of MS Angle Iron Frame / Bracket made of 40 x 40 x 5 mm thick should be grouted / bolted on wall by cementing / suitable size nuts bolts for fixing AC Machine incl. all complete as per direction of EIC. |
| 2 | Supply & refilling of R-410A/R-32 refrigerant gas for AC machines. |
| 3 | Supplying, Installation, testing and commissioning including vaccumiazation and Nitrogen testing of following nominal sizes of soft drawn copper refrigerant piping for Split AC system after Bending, Swerazing, Welding as required with elastometric nitrile rubber tubular sleeves sections of 19 mm thick insulation as given below for Suction and Liquid lines, all accessories as per specifications etc. as required : |
| 4 | 1/4\\" For Liquid Line. |
| 5 | 5/8\\" For suction Line. |
| 6 | Supply & Laying 1.1KV grade 3.5/4 core 2.5 sqmm flexible copper cable with screw, saddle drill machine nut bolt etc all necy. items needed for connection.(from starter to AC outdoor connection)(Make: Havells/KEI/Polycab/Fenolex as per approved by EIC)[Reference non schedule approved rate by SE/PEC]. |
| 7 | Supply & fixing of 3/4” PVC drain pipe with saddles for fixing the pipe on wall. |
| 8 | Supply and fixing of 40mm diameter high pressure UPVC solvent weld lead free and superior quality schedule 40mm pipe as per direction fixing on wall of EIC (Make :- Supreme or equivalent make) |
| 9 | Supply and fixing of 25mm diameter high pressure UPVC solvent weld lead free and superior quality schedule 80mm pipe fixing on wall as per direction of EIC (make :- Supreme or equivalent make) |
| 10 | Supply and fixing of 40mm diameter high pressure UPVC socket, el bow, Tee (Make:-Supreme or equivalent make) |
| 11 | Supply and fixing of 40mm diameter high pressure UPVC Tee (Make:-Supreme or equivalent make) |
| 12 | Supply and fixing of 40mm x 25mm diameter high pressure UPVC reducing tee as per direction of EIC (make :- Supreme or equivalent make) |
| 13 | Hiring charges for scaffolding arrangement including dismantling at the end of work and carriage, for LC installation, per storey of building per vertical run. (P : J-1/Item-7) |
| 14 | Supplying, fabrication and fixing of MS u- channel of 6mm thick of size (75mm X 40 mm X 40 for installation of outdoor unit of ACs including drilling 2 nos holes in each channel inclu the same with cement concrete (1 :1 1/2:3) etc. fabbdcated with horizontal agle of 25mmx 25 mm x 6 mm supporting angle of 50mm x50mm x6 mm in each platform. The platform should be baricaded and set for ODU machine in outer angle transmitting the load centraly through 2 nos (50 mm x 50 mm x6 mm )angle increated in to the wall incl fiber sheet shade as per direction of EIC . The area of the platform is of suitable size as per machine configuration and load with addiquiet service acces & safe to cary out the maintenance of ODU as per direction of EIC. The design of platform structure to be approved by EIC. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 29, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 18, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 18 daysNov 20, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 20 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender