Tender For Civil And Related Electrical And Mechanical Work Under Raintoli Water Supply Scheme For The Affected Habitations Of Ward No 07 Of Nagar Palika Rudraprayag
Tender Value
Ref. Documents
Estimated cost
Bid Submission
16 Nov 2026
12 days left
EMD
1 Lakhs
Bank guarantee accepted
Document Fee
4720
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Rudra Prayag → Uttarakhand
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Civil And Related Electrical And Mechanical Work Under Raintoli Water Supply Scheme For The Affected Habitations Of Ward No 07 Of Nagar Palika Rudraprayag
BOQ
| Sl. No. | Item Description |
| 1 | Excavation in foundation for retaining & breast walls in all types of soils and rocks including lead, lift and disposal of surplus material as per direction of engineer - in - charge |
| 2 | Providing and laying cement concrete in retaining walls, return walls (any thickness) including attached pilasters, columns, piers, abutmets, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping bed blocks, anchor blocks, plain window sills, fillets etc upto floor five level, excluding the cost of centring, shuttering and finishing Nominal mix 1:2:4 (Hand mixed) |
| 3 | Random Rubble Masonary laid dry in breast wall,retaining wall, parapets,scupper etc. Including supply of all materials,labour,t & p& royality etc,required for proper complition of work.(As per PWD Uttarakhand specifications) |
| 4 | Random Rubble Stone Masonry laid in 1:6 cement and sand mortar, in breast walls, retaining walls, parapets scuppers, etc. including supply of all material, labour T&P and royaltiies etc.(As per PWD Uttarakhand specifications) |
| 5 | Excavation earth with mixed mooram singles, kankar etc depth up to 1.50mtr below G.L. for trenches. |
| 6 | Carting ,laying, jointing and fixing G.I pipes complete with G.I fitting including trenches and refilling20 mm dia. nominal bore |
| 7 | 25 mm dia. nominal bore |
| 8 | 32 mm dia. nominal bore |
| 9 | 40 mm dia. nominal bore |
| 10 | Carting , laying, jointing by electric welding with proper grade of elctrodes suitable for jointing of water supply pipe line80 mm dia. nominal bore |
| 11 | Provision for Photography & Sign Board |
| 12 | E&M WORK Pump Set and Other Essential fittingsksb / pluga submersible pump motor set, discharge 300 lpm -400 lpm and head 220-240 meter |
| 13 | sitc on turnkey basis for fully automatic star delta starter panel suitable to run above pump set |
| 14 | supply, installation, testing and commissioning of 125 amp change over switch in steel sheet enclosure |
| 15 | main piping and valves: -ms pipe heavy duty 80 mm, thickness 5.40 mm thickness with flanges welded at both ends for interlocking arrangments, outer cut on flanges for submersible cable along with packing and nut bolts (1 pipe = 3 meter = 4 pipe, total 20 pipe) along with following: -* cast steel sluice valve 80 mm, class 300 with flanges, packing and nut bolts (1- for delivery line and 1 for bypass arrangements)* cast steel non-return valve 80 mm, class 300 with flanges, packing and nut bolts (1- for delivery line and 1 for rising main)* 80 mm dia ms bend 90° bend -2 nos* 80 mm ms tee : 01 nos* ms distance pipe 80 mm, 1.5 mtr length with flanges welded at both ends : 02 nos* ms distance pipe 80 mm, 1.0 mtr length with flanges welded at both ends: 01 nos* ms nrv tail piece* ms top casing cover: 01 no* nut bolts, packing and jointing material |
| 16 | supply of 02 tonne with 4.5 meter chain heavy duty chain pulley |
| 17 | power wiring and earthing material a. submersible copper cable required,size 16 sqmm * 3 core: 150 meterb. power cable from main to satrter required isalmuinum arm. 50 sqmm * 3.5 core :40 meterc. lugs and jointing material: 01 setd. earthing required for pump and panel |
| 18 | gauges: supply and fixing of gauges and fittings i pressure gauge 100 mm dial size of 0-100 kg/ cm²-01 no.ii compound gauge 100 mm dial size of 0-1 kg/ cm²-01 no.iii heavy duty control cock-01 noiv m.s. nipple pipes, elbows etc. required for fixing the above gauges on pump |
| 19 | electronic chlorine dosing system complete in 6kg pressure,230v with installation,100 ltr tank and connect with starter complete |
| 20 | rubber insulation mat |
| 21 | sitc electromagnetic flow meter flange ends, display type: integral, power supply: 80-300 v ac, output: 4-20ma pulse output, pressure rating: 10 kg/cm2, design of the measuring sensor: flange ansi 150, flange material: cs/ms, electrode material: ss316, measuring tube: ss 304, temp upto 80°c, with iia, iib, cmri certified with remote reading and modem size 80 mm |
| 22 | complete installation and testing at site for pumps and accessories |
| 23 | cartage at site including road head and head load upto site |
| 24 | AUTOMATIONSingle card flowchart programmable RTU with appropriate enclosures alongwith battery backup and software as specified at site including, 3 serial port, digital input (isolation), digital output, analog inputs, analog outputs (isolated), local display, membrane key board and date storage. |
| 25 | Pressure transmitter |
| 26 | Communication system for RTU with existing MCS including all accessories. |
| 27 | Ultrasonic level transmitter |
| 28 | WHEEL VALVE CHAMBERExcavation of earth mixed with boulders etc requiring use of specials T&P such as pick axe pabbels etc. for foundation including lift up to 1.50 m and lead upto 30 filling watering and ramming of excavated earth into trenches or into plinth and disposal of surplus earth upto a distance of 60 m from the foundation trenches. |
| 29 | Same as above but in Medium Rock |
| 30 | Provide and lay P.C.C 1:4:8 with cement, local sand and 40 mm gauge stone ballast including supply of all material labour T&P required for proper completion of the work in foundation |
| 31 | R.C.C work in cement concrete with 20 mm gauge approved stone grit, coarse sand and cement in proportion of 3:1.5:1 excluding supply of reinforcement steel and its bending but including binding wire and centering and shuttering including supply of all materials, labour, T&P etc. required for proper completion of the work |
| 32 | Mild steel & iron work in plain work such as R.C.C work (when not included in over all rate) wrought to required shape as necessary including bending for proper completion of work including supply of all materials, steel & wastage |
| 33 | Centering shuttering including struttings, propping etc. and removal of form work (a) Raft |
| 34 | (b) Outer Wall |
| 35 | (c) Inner Wall |
| 36 | (d) Slab |
| 37 | PUMP HOUSEExcavation of earth in foundation soil mixed with single, bajri etc. including lift up to 1.5 m and lead up to 50 m filling watering and ramming of excavated earth in to the trenches or in to the space between the building and the sides of foundation trench |
| 38 | PCC in 1:4:8 in foundation with cement, local sand and 40 mm gauge stone ballast including supply of material, labour, T&P etc. for proper completion of work. |
| 39 | First class brick work in 1:6 cement and local sand including supply of all material, labour, T&P etc. complete.(IN FOUNDATION & PLINTH) |
| 40 | First class brick work (one and half brick thick) in 1:6 cement and coarse sand including supply of all material, labour, T&P etc. in super structure. |
| 41 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m |
| 42 | 12 mm thick PC plaster in 1:6 cement and local sand mortar including supply of all labour material, T&P etc. all complete |
| 43 | RCC 1:1.5:3 with cement, coarse sand and 20 mm gauge stone ballast in lintals, beams, sunshades door and window sills, bed plates including supply of reinforcement and its bending but including its fixing and binding the same with 5 mm thick binding wire |
| 44 | Same as above but for slab |
| 45 | Mild steel or iron work in plain work such as RCC work brought to required shape including supply of steel & its bending. |
| 46 | Mild steel or iron work in heavy section & sizes as door frames, windows, grills, gratings etc. wrought to required shape including supply of steel sections, hinges nuts & their fixing required for proper completion of work. |
| 47 | 40 mm thick PC 1:2:4 with cement coarse sand and 20 mm gauge stone ballast in flooring, laid in panels finished with 3 mm floating coat of neat cement. |
| 48 | 75 mm thick base concrete consisting of 1:4:8 cement, local sand & 40 mm stone ballast. |
| 49 | Steel work welded in built up section/framed work including cutting, hoisting, fixing (45 x 45 mm x 5 mm angle iron MS Chaukhats in doors and windows) |
| 50 | Supply and fix 35 mm thick flush ply door & window shutters fully glazed and including fixing of hinges bolts locks, handles and other fittings including supply of all fittings labour, materials, T&P etc. all complete. |
| 51 | S/F of 4mm thick glazing in window shutter including supply of all required. |
| 52 | Painting or warnishing new iron work or wood work with one coat of primer & two coats of approved quality synthetic enamel paint or varnish including. Supply of all material, labour T&P etc. required for proper completion of work. |
| 53 | Colour washing such as green, blue or buff to give an even shadeNew work (two or more coats) with a base coat of white washing with lime |
| 54 | Distempering with oil bound washable distemper of approved brand and New work (two or more coats) over and including water tinnable priming coat with cement primer |
| 55 | Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 56 | Stone tile work for wall lining upto 10 m height with special adhesive over 12mm. 8mm thick (mirror polished and machine cut edge). Granite stone of any colour and shade. |
| 57 | Supply & fixing of white ciremic Tile in inner side of wall upto door lable of Pump house |
| 58 | Supply & laying of Kota stone tile in floor |
| 59 | Protection Works as per actual(a) Excavation for foundation in Soil mixed with boulders |
| 60 | (b) RR Stone Masonry 1:6 including supply of all materials, labour, T&P etc. complete |
| 61 | ELECTRIFICATION PUMP HOUSE Cost of Internal and External electrification of pump houseWiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with piano type switch, phenolic laminated sheet, suitable size MS box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Group A |
| 62 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required.(a) 2x2.5 sq. mm + 1x2.5 sq. mm earth wire |
| 63 | 2x4 sq. mm + 1x4 sq. mm earth wire |
| 64 | Supply and fixing of Piano type 5 amp switch on the existing switch board. |
| 65 | Supply and fixing of 3 pin 5/6 amp socket outlet on the existing switch board. |
| 66 | Supplying and fixing metal box of 180 mm X 100 mm X 60 mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 6 pin 5/6 A & 15/16 A socket outlet and 15/16 A piano type switch, connections, painting etc. as required. |
| 67 | Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)8 way double door |
| 68 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single Pole |
| 69 | Supply and Fixing of Double pole, 240 V, isolator in the existing MCB DB complete with connection, testing etc as required. (40A) |
| 70 | Supply and Fixing of bulk head light Bajaj/Philips/equivalent make |
| 71 | Supply anf Fixing of 40 W tube light complete in all respect (Bajaj/Philips/equivalent make) |
| 72 | Supply anf Fixing of 14 watt CFL on above fitted Holder (Bajaj/Philips/equivalent ) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 29, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 16, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysNov 18, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 14 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender