Tender For Construction Of Jalminar With Deep Boring, At-Dipu Maidan Bishunpur, Block- Bishunpur, Dist- Gumla.
Tender Value
7.04 Lakhs
Estimated cost
Bid Submission
04 Nov 2026
6 days left
EMD
14100
Bank guarantee accepted
Document Fee
1250
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Gumla → Jharkhand
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Jalminar With Deep Boring, At-Dipu Maidan Bishunpur, Block- Bishunpur, Dist- Gumla.
BOQ
| Sl. No. | Item Description |
| 1 | CIVIL WORKS |
| 2 | A. Solar Photovoltaic (SPV) Solar Submersible DC Water Motor Pump |
| 3 | Designing, Supplying, Installation, Testing & Commissioning with all tools & parts of following solar photovoltaic (SPV) solar submersible DC water motor pump suitable for minimum 125mmx115m bore well as MNRE guideline with following specification & accessories.(i) 1 HP (DC Pump) with 900 WP minimum watt PV panel as MNRE pump head max shut-off head up to 120 mtrs for higher or lower head or in between various modules output could be decided on prorates basis. |
| 4 | Carrying out recuperation/Yield Test for ascertaining the discharge of constructed well/ excavated profile as directed by the IEC. The test out by the drawing down water from the well/ profile below normal/subsoil water level up to full depth rise is recorded the normal water level/subsoil water level in the well / profile as well as strainer/level at pump as per design of W.S. scheme shall be recorded prior to the test including cost of all materials, over Load directed. Labours etc. complete as directed. |
| 5 | Supplying all labours, tools and equipments for dismantling of head & water tank assembly and taking out 32 mm dia old G.I. Pipe, connecting rod, cylinder assembly the dismantled components after necessary changing for making the T/W in good condition with all transportation including unused taken out materials back in store all complete job as per direction of E/I. (As per Model Estimate of Solar Energy based Mini WSS. TS done by SE, Ranchi Circle & Circle Gumla dt. 21.05.2019) |
| 6 | Provision Of solar night lamp. |
| 7 | B. Deep Boring |
| 8 | Cost of Drilind 200 mmx165mmx125 mtr.deep bore well in all kind of Soil and rock in rural area for instalation of pump set with Hydrolic DTH Rig machine all complete including all materials, tools,driling rig,air compressureand equipmentsas well as fule, lubricantsand cost of transportation of rig machine annd other vehical up to Site. |
| 9 | (a) From 0.00 M to 50.00 M below G.L. |
| 10 | (b) From 51.0 M to125.00 M |
| 11 | (c) From126.0 M to150.00 M |
| 12 | Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in-charge.200 mm nominal size dia |
| 13 | Development of tube well in accordance with IS : 2800 (part I) andIS: 11189, to establish maximum rate of usable water yield withoutsand content (beyond permissible limit), with required capacity aircompressor, running the compressor for required time till well isfully developed, measuring yield of well by \\"V\\" notch method or anyother approved method, measuring static level & draw down etc. bystep draw down method, collecting water samples & getting testedin approved laboratory, i/c disinfection of tubewell, all complete,including hire & labour charges of air compressor, tools & accessoriesetc., all as per requirement and direction of Engineer-in-charge |
| 14 | Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for borewell of:200 mm dia |
| 15 | Providing and fixing M.S. clamp of required dia to the top of casing/ housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of required size complete.200 mm clamp |
| 16 | C. RCC Foundation For Steel Structure staging & Solar Panel |
| 17 | Earth work in excavation in foundation trenches in ordinary soil and disposal of excavated earth as obtained to a distance up to 50.0m ,including all lifts, levelling ,ramming the foundation trenches, removing roots of trees, shrubs all complete as per approved design ,building specification and direction of E/I (vide classification of soil item -B) |
| 18 | Providing coarse clean sand in filling in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts including cost of all materials ,labour ,royalty and taxes all complete as per building specification and direction of E/I(Mode of measurement compacted volume) |
| 19 | Providing designation 75A one brick flat soling joints filled with local sand and including cost of watering taxes, royalty all complete as per building specification and direction of E/I. |
| 20 | Providing P.C.C M 150 in nominal mix (1:2:4) in foundation with approved quality of stone chips 20 mm to 6 mm size graded and clean coarse sand of F.M. 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer and placing in position, vibrating, skirting, curring, taxes and royalty complete as per building specification and direction of E/I. |
| 21 | Providing R.C.C M 200 in nominal mix (1:1.5:3) in column with approved quality of stone chips 20 mm to 6 mm size graded and clean coarse sand of F.M. 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer and placing in position, vibrating, skirting, curring, taxes and royalty complete as per building specification and direction of E/I. |
| 22 | (a)Foundation for Steel structure staging |
| 23 | Footing (BCD-SOR-5.3.1.1) |
| 24 | Vertical Pedestal (BCD-SOR-5.3.2.1) |
| 25 | Tie Beam (BCD-SOR-5.3.2.1) |
| 26 | Footing (BCD-SOR-5.3.1.1) |
| 27 | Vertical Pedestal SOR-5.3.2.1) |
| 28 | Providing for steel reinforcement as per approved design and drawing excluding carriage of T.S. bar to work site cutting, bending with annealed wire with cost of wire, removal of rust placing the rods in position all complete as per building specification and direction of E/I. |
| 29 | 8mm dia |
| 30 | 10-12mm dia |
| 31 | Carriage of materials from different sources or departmental stores to work site including loading, transporting, unloading and stacking the materials at work site etc. all complete job. as per direction of E/I.(Assuming 10%) |
| 32 | D. Const Of Galvanized Tubular Steel Str Staging |
| 33 | Providing structural steel galvanised tubular hollow section work in trusses. other similar trussed purlins and members with all bracing,gusset plates etc as per detailed design and drawing or as directed by Engineer- in-charge including cutting fabricating hoisting, erecting and fixing in position making riveted/bolted /welded connections and one coat of anticorrosive paint and over it two coat of all oil painting & For Structure(PLUS) Providing and applying materials &labour for hot dip galvanizing of above structure including transportation for galvanizing minimum thickness 80microns (Net wt. of components to be Galv) preferably TATA structural section etc complete. |
| 34 | Providing structural steel work in trusses other similar trussed purlins and members with bracing gusset plates etc as per detailed design and drawing cr as directed by Engineer- in-charge including cutting fabricating hoisting erecting and fixing in position making reverted bolted welded connections one coat of anticorrosive paint and over it two coats of oil painting etc complete. (MJP 2019-2020 Sec F Item 6) |
| 35 | Materials and labours for vinyl painting of matter given by dept. in different color(as per market rate) |
| 36 | E. Water Storage |
| 37 | Cost of 5000 litrs capacity water storage tank (Sintex/Himgiri/Gangotri) |
| 38 | Transportation Charge. |
| 39 | Uplifting og 5000 ltrs capacity tank up to 4.00m by tools, rope and labour etc. |
| 40 | Making hole in tank. |
| 41 | Making long screw in GI pipe including supplying and fitting nuts and extra socket etc. |
| 42 | Miscellaneous |
| 43 | F. Recharge pit |
| 44 | Earth work in excavation in foundation trenches in hard soil (vide classification of soil item-B) and disposal of excavated earth as obtained to a distance up to 50m including all lifts, leveling, ramming the foundation trenches, removing roots of trees, shrubs all complete as per approved design, building specification. |
| 45 | Providing coarse clean sand in filling in foundation trenches or in plinth including ramming and watering in layers not exceeding 150 mm thick with all leads and lifts including cost of all materials, labour, royalty and taxes all complete as per building specification & direction of E/I. |
| 46 | Providing designation 75A one brick flat soling joints filled with local sand and including cost of watering taxes, royalty all complete as per building specification and direction of E/I. |
| 47 | Providing P.C.C M 150 in nominal mix (1:2:4) in foundation with approved quality of stone chips 20 mm to 6 mm size graded and clean coarse sand of F.M. 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer and placing in position, vibrating, skirting, curring, taxes and royalty complete as per building specification and direction of E/I. |
| 48 | Providing designation 75A brick work in CM (1:6) in foundation and plinth with approved quality of clean coarse sand of FM 2to2.5 including 10mm thick mortar joint cost of screening materials, raking out joints to 15mm depth curing, and royalty all complete as per specification and direction of E/I. |
| 49 | Providing R.C.C M 200 in nominal mix (1:1.5:3) in roof slab with approved quality of stone chips 20 mm to 6 mm size graded and clean coarse sand of F.M. 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer and placing in position, vibrating, skirting, curring, taxes and royalty complete as per building specification and direction of E/I. |
| 50 | Providing Tor steel reinforcement of 8 mm,10 mm & 12 mm dia bars as per approved design and drawing excluding carriage of Rods (straight or in coils) to work site, cutting, bending and binding with annealed wire with cost of wire, removal of rust, placing the rods in position all complete as per building specification and direction of E/I. |
| 51 | Providing 12 mm thick cement plaster (1:6) with….do… all complete as per building specification and direction of E/I. |
| 52 | Providing brick bats including cost of the bats, labour, tools, royalty etc. all complete as per building specification and direction of E/I. |
| 53 | Supplying all materials, labours, tools, tracles and constructing brick masonry drain 150mm wide and 150mm deep with 250mm B/W with 75A bricks in CM(1:6) in apron on both sides over 50mm thick pcc M15 (1;2:4) over a brick flat soling over 50mm thick sand filling and having 12mm CP in CM (1:3) with punning on exposed surfaces all complete as per specification and direction of E/I. |
| 54 | Providing and supplying in standard lengths polythene pipe confirming to IS 4984-4984/14151/12786/13488 90mm dia. |
| 55 | Carriage of Materials-Assuming 10%. |
| 56 | Construction of Public Stand Post and Platform |
| 57 | Annual Repair and Maintenance |
| 58 | GST @18% |
| 59 | LABOURCESS @1% Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 29, 2026
11:30 IST
Tender Published
Tender notice published.
TodayNov 04, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysNov 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender