Tender For Construction Of Jalminar With Deep Boring, At-Nps Kasira, Panchayat- Kasira, Block- Gumla, Dist- Gumla.
Tender Value
6.94 Lakhs
Estimated cost
Bid Submission
04 Nov 2026
6 days left
EMD
14000
Bank guarantee accepted
Document Fee
1250
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Gumla → Jharkhand
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Jalminar With Deep Boring, At-Nps Kasira, Panchayat- Kasira, Block- Gumla, Dist- Gumla.
BOQ
| Sl. No. | Item Description |
| 1 | CIVIL WORKS |
| 2 | A. Solar Photovoltaic (SPV) Solar Submersible DC Water Motor Pump |
| 3 | Designing, Supplying, Installation, Testing & Commissioning with all tools & parts of following solar photovoltaic (SPV) solar submersible DC water motor pump suitable for minimum 125mmx115m bore well as MNRE guideline with following specification & accessories.(i) 1 HP (DC Pump) with 900 WP minimum watt PV panel as MNRE pump head max shut-off head up to 120 mtrs for higher or lower head or in between various modules output could be decided on prorates basis. |
| 4 | Carrying out recuperation/Yield Test for ascertaining the discharge of constructed well/ excavated profile as directed by the IEC. The test out by the drawing down water from the well/ profile below normal/subsoil water level up to full depth rise is recorded the normal water level/subsoil water level in the well / profile as well as strainer/level at pump as per design of W.S. scheme shall be recorded prior to the test including cost of all materials, over Load directed. Labours etc. complete as directed. |
| 5 | Supplying all labours, tools and equipments for dismantling of head & water tank assembly and taking out 32 mm dia old G.I. Pipe, connecting rod, cylinder assembly the dismantled components after necessary changing for making the T/W in good condition with all transportation including unused taken out materials back in store all complete job as per direction of E/I. (As per Model Estimate of Solar Energy based Mini WSS. TS done by SE, Ranchi Circle & Circle Gumla dt. 21.05.2019) |
| 6 | Provision Of solar night lamp. |
| 7 | B. RCC Foundation For Steel Structure staging & Solar Panel |
| 8 | Earth work in excavation in foundation trenches in ordinary soil and disposal of excavated earth as obtained to a distance up to 50.0m ,including all lifts, levelling ,ramming the foundation trenches, removing roots of trees, shrubs all complete as per approved design ,building specification and direction of E/I (vide classification of soil item -B) |
| 9 | Providing coarse clean sand in filling in foundation trenches or in plinth including ramming and watering in layers not exceeding 150mm thick with all leads and lifts including cost of all materials ,labour ,royalty and taxes all complete as per building specification and direction of E/I(Mode of measurement compacted volume) |
| 10 | Providing designation 75A one brick flat soling joints filled with local sand and including cost of watering taxes, royalty all complete as per building specification and direction of E/I. |
| 11 | Providing P.C.C M 150 in nominal mix (1:2:4) in foundation with approved quality of stone chips 20 mm to 6 mm size graded and clean coarse sand of F.M. 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer and placing in position, vibrating, skirting, curring, taxes and royalty complete as per building specification and direction of E/I. |
| 12 | Providing R.C.C M 200 in nominal mix (1:1.5:3) in column with approved quality of stone chips 20 mm to 6 mm size graded and clean coarse sand of F.M. 2.5 to 3 including screening, shuttering, mixing cement concrete in mixer and placing in position, vibrating, skirting, curring, taxes and royalty complete as per building specification and direction of E/I. |
| 13 | (a)Foundation for Steel structure staging |
| 14 | Footing (BCD-SOR-5.3.1.1) |
| 15 | Vertical Pedestal (BCD-SOR-5.3.2.1) |
| 16 | Tie Beam (BCD-SOR-5.3.2.1) |
| 17 | Footing (BCD-SOR-5.3.1.1) |
| 18 | Vertical Pedestal SOR-5.3.2.1) |
| 19 | Providing for steel reinforcement as per approved design and drawing excluding carriage of T.S. bar to work site cutting, bending with annealed wire with cost of wire, removal of rust placing the rods in position all complete as per building specification and direction of E/I. |
| 20 | 8mm dia |
| 21 | 10-12mm dia |
| 22 | Carriage of materials from different sources or departmental stores to work site including loading, transporting, unloading and stacking the materials at work site etc. all complete job. as per direction of E/I.(Assuming 10%) |
| 23 | C. Const Of Galvanized Tubular Steel Str Staging |
| 24 | Providing structural steel galvanised tubular hollow section work in trusses. other similar trussed purlins and members with all bracing,gusset plates etc as per detailed design and drawing or as directed by Engineer- in-charge including cutting fabricating hoisting, erecting and fixing in position making riveted/bolted /welded connections and one coat of anticorrosive paint and over it two coat of all oil painting & For Structure(PLUS) Providing and applying materials &labour for hot dip galvanizing of above structure including transportation for galvanizing minimum thickness 80microns (Net wt. of components to be Galv) preferably TATA structural section etc complete. |
| 25 | Providing structural steel work in trusses other similar trussed purlins and members with bracing gusset plates etc as per detailed design and drawing cr as directed by Engineer- in-charge including cutting fabricating hoisting erecting and fixing in position making reverted bolted welded connections one coat of anticorrosive paint and over it two coats of oil painting etc complete. (MJP 2019-2020 Sec F Item 6) |
| 26 | Materials and labours for vinyl painting of matter given by dept. in different color(as per market rate) |
| 27 | D. Water Storage |
| 28 | Cost of 5000 litrs capacity water storage tank (Sintex/Himgiri/Gangotri) |
| 29 | Transportation Charge. |
| 30 | Uplifting og 5000 ltrs capacity tank up to 4.00m by tools, rope and labour etc. |
| 31 | Making hole in tank. |
| 32 | Making long screw in GI pipe including supplying and fitting nuts and extra socket etc. |
| 33 | E. Recharge pit |
| 34 | Earth work in excavation in foundation trenches in hard soil (Vide Classification soil item B) and disposal of excavated earth as obtained to a distance up to 50 Mtr. including all lifts, leveling, ramming the foundation trenches, removing roots of trees, shrubs all complete as per approved design, specification and direction of E/I. (DWSD3.1.1.1) |
| 35 | Dismantling plain cement concrete work including stacking serviceable materials in countable stacks within 15 M lead and disposal of unserviceable materials with all leads all complete BCD-5.10.2 |
| 36 | Providing PCC M-200 with nominal mix of (1:1.5:3) with approved quality of stone chips 20 mm to 6 mm size graded and clean coarse sand of FM 2.5 to 3.0 including screening, shuttering, mixing cement concrete in mixer and placing in position, vibrating, sticking, curing , taxes and royalty all complete as per specification and direction of E/I. for construction of road cutting portion- BCD5.3.1.1 |
| 37 | Rising Main Manufacture, supply and Delivery of following Nominal dia UPVC column pipes including PVC socket (Coupler), 65mm dia -Density of pipe 1.38 to 1.43 Gm per Cm3 OD:74.5 to 75.2mm wall Thickness End:9mm to 10.7mm, Barrel 9mm to 10.7 mm, Length: 3Mtrs.Rising main |
| 38 | Rising Main Manufacture, supply and Delivery of following Nominal dia UPVC column pipes including PVC socket (Coupler),50 mm dia -Density of pipe 1.38 to 1.43 Gm per Cm3 OD:87.5 to 88.2mm wall Thickness End:9 .8 mm to 11.9mm, Barrel 7.3mm to 9 mm, Length: 3Mtrs. Delivery Pipe |
| 39 | Distribution: Providing and supplying High Density Polyethylene pipe (HDPE pipe) of 20 mm to 225 mm OD and pressure 6.0 Kg/cm2 and 10 Kg/cm2 suitable for water supply which is available in all standard conforming to ISI -- 4984/14151/12786/13488,ISO 4427 , DIN-8074 materials rates are Ex-factory excluding transportation, taxes and duties. PE-80 , PN- 10 (Item No-112M 1028) 63 mm HDPE Pipe |
| 40 | Distribution: Providing and supplying High Density Polyethylene pipe (HDPE pipe) of 20 mm to 225 mm OD and pressure 6.0 Kg/cm2 and 10 Kg/cm2 suitable for water supply which is available in all standard conforming to ISI -- 4984/14151/12786/13488,ISO 4427 , DIN-8074 materials rates are Ex-factory excluding transportation, taxes and duties. PE-80 , PN- 10 (Item No-112M 1028) 50 mm HDPE Pipe |
| 41 | Distribution: Providing and supplying High Density Polyethylene pipe (HDPE pipe) of 20 mm to 225 mm OD and pressure 6.0 Kg/cm2 and 10 Kg/cm2 suitable for water supply which is available in all standard conforming to ISI -- 4984/14151/12786/13488,ISO 4427 , DIN-8074 materials rates are Ex-factory excluding transportation, taxes and duties. PE-80 , PN- 10 (Item No-112M 1028) 32 mm HDPE Pipe |
| 42 | Distribution: Providing and supplying High Density Polyethylene pipe (HDPE pipe) of 20 mm to 225 mm OD and pressure 6.0 Kg/cm2 and 10 Kg/cm2 suitable for water supply which is available in all standard conforming to ISI -- 4984/14151/12786/13488,ISO 4427 , DIN-8074 materials rates are Ex-factory excluding transportation, taxes and duties. PE-80 , PN- 10 (Item No-112M 1028) 20 mm HDPE Pipe |
| 43 | Providing and fixing Gun Metal Gate valve with C I wheel of approved quality(screwed end).DSR 18.17.5 50 mm dia |
| 44 | Providing and fixing Gun Metal Gate valve with C I wheel of approved quality(screwed end).DSR 18.17.5 65 mm dia |
| 45 | Providing and supplying High Density Polyethylene (HDPE ) fittings of 20 mm to 225 mm OD and pressure 6.0 Kg/cm2 and 10 Kg/cm2 suitable for water supply which is available in all standard conforming to ISI -- 4984/14151/12786/13488,ISO 4427 , DIN-8074 materials rates are Ex-factory excluding transportation, taxes and duties. PE-80 , PN- 10 |
| 46 | Lowering, Laying and Jointing H. D. P. E./M. D.P. E. pipes in proper position including all specials by compression fitting/electro fusion and butt fusion jointing procedure as per relevant IS Code complete with all materials for jointing procedure like Electro fusion machine, Electric heater/butt fusion welding machine with hydraulic jack, top loading clamp etc. and all labours as directed by engineer in charge as per IS-7634 Part II. MJP 1920 sec-I-IX sl no -2(i) |
| 47 | 50 mm HDPE Pipe |
| 48 | 65 mm HDPE Pipe |
| 49 | 65 mm HDPE Pipe |
| 50 | 50 mm HDPE Pipe |
| 51 | 32 mm HDPE Pipe |
| 52 | 20 mm HDPE Pipe |
| 53 | Providing 15 mm dia. G.I. pipe Tata or equivalent make as per IS 1239 (Part 1/2004) ISI Mark /medium quality in Stand Post |
| 54 | Supplying all materials , labour and tools for fixing 15 mm dia G.I. pipes with Red lead and yarn of following nominal bore with screwed and socketed joints on wall, ceiling and floor including supplying and fitting of wall hooks or pipe clamps, wooden plugs, cutting pipes to size and threading ends if required etc. all complete as per specification and direction of Engineer-in-Charge. DWSD 3.1.2(i) |
| 55 | Supplying and fixing G.I. fittings of approved make all complete as per specification and direction of E/I. DWSD 3.1.13 |
| 56 | Elbow |
| 57 | Reducing Socket |
| 58 | Nipple |
| 59 | Plain Socket |
| 60 | Supplying and fixing G.M. ferrule of approved make in existing C.I./D.I. main Including drilling and taping C.I./D.I. main all complete as per specification and direction of E/I. 3 mm, 6 mm 10 mm dm ferrule weight not less than 425 gram. (JOSR DWSD 3.1.4.1) |
| 61 | Providing and fixing Gun Metal full way valve of approved quality, all complete, as per specification and direction of E/I. DWSD 3.1.12 |
| 62 | 50 mm dia and weight not less than 1.5 Kg. |
| 63 | 65 mm dia Full way valve |
| 64 | Providing and fixing of male ended C.I.Body brass spindle valve and seat Bib cock of approved quality with extra socket all complete as per specification and direction of E/I. DWSD 3.1.5.2 15 dia and weight not less than 400 Gm |
| 65 | Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1 cement :4 coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick, finished with a floating coat of neat cement complete as per standard design.With common burnt clay F.P.S.(non modular) bricks of class designation 7.5. DSR 18.32.1 |
| 66 | Supplying materials , labours and equipment's for construction of 0.90M x 0.90 M size P.C.C. (1:2:4) Rectangular Platform with stand post in house including 12 mm thick cement plaster in C.M. (1:4) with neat cement punning over exposed surface all complete job, as per approved design, specification and direction of E/I. |
| 67 | Providing brick masonry chamber of inner size 600 x 600 x 450 mm deep for bore well protection having 125 mm thick wall and 75 mm R.C.C cover including cement plaster of exposed surface, etc all complete job (Annexture I). |
| 68 | Earth work in back filling the trenches after laying different types and size of pipes with earth removed during excavation within initial lead and lift as per specification and direction of Engineer-in-Charge. (3.1.1.2) |
| 69 | Providing fitting & fixing 32 mm to 50 mm service HDPE saddle all complete job, as per approved design, specification and direction of E/I. (As per old model estimate) |
| 70 | O & M Cost for 1st year (Excluding Repair Charges) |
| 71 | O & M cost for 2nd Year = O & M for 1st Yr + 6% of O&M for 1st Year + Annual repairing Charges |
| 72 | O & M cost for 3rd Year =1.06 x 2st year |
| 73 | O & M cost for 4th Year =1.06 x 3rd year |
| 74 | O & M cost for 5th Year =1.06 x 4th year |
| 75 | Provision of one no SIM card & its recharging cost for RMC |
| 76 | Construction for 115/125 mm dia drilled TubeWell for drilling in all kinds of soil rock for installation of hand pump with D.T.H Rig machine all complete including supplying all materials, labours, tools, drilling, rigs, air compressor and equipments as well as fuel lubricant for making 125/115 mm dia boring etcand cost of transporting rig machine and other vehicle up to site work as per specification and direction of Engineer-in-charge. (a) Up to 30mtr. Depth bellow G.L. in Rural Areas |
| 77 | (b) Beyond 30mtr. In Rural Areas |
| 78 | 125mm dia blue UPVC Casing pipe as casing for protecting the side from falling during the process |
| 79 | bentonite solution and equipments for Grouting to Casing Pipe all complete job including carriage of |
| 80 | doing washing, flushing and development of drilled tube well to give clean and clear water all complete |
| 81 | Supplying all materials labours and equipment including 125 mm dia GI/CI cap 125 mm dia T/W properly all complete and taking it out as per specification & direction of E/I. (the cap will be property of department) |
| 82 | Supplying all tools, equipment, labours and lowering32mmdiaG.I. (Medium) pipeinDTin3 mtr. Length all complete job as per direction of E/I. Including carriage of materials. |
| 83 | Supplying all tools, Labour for fitting and fixing deepwell cylinderwithnecessary connecting rod all complete jobasperspecification&directionof E/I. |
| 84 | Supplying all materials, labours for fitting and fixing of India Mark II Hand Pump with all accessoriesall jobcompleteasperdirectionofE/I. Including carriage of materials. |
| 85 | Supplyingallmaterials, laboursandequipment for constructingPCC(1:2:4) circularplatformaround each drilled tube well including 12mm thick cement plaster (1:4) with neat cement punning overexposedsurfaceasperUNICEFdesignetc.all complete. Including carriage of materials. |
| 86 | Supplyingallmaterials labour andequipment for constructing PCC (1:2:4) drain as per UNICEF Design etc. all complete .Including carriage of materials. |
| 87 | Add Extra Itemfor Supplying tools, labours and materials for painting, numbering and year for construction of T/Well and taking of colour photograph with two or three nearest persons including platform, drain, soak pit and also longitude&latitude, detailsof T/Wsuchas total depth, casingdepth, staticwater level,drawdown, discharge, stratachart, beneficiarypopulationetc in separate sheet/format all complete as per direction of E/I. |
| 88 | cost of standard I.S.I.mark Deep Well Hand Pump for Indiamark-II, I.S.I.15500(Part2)/2004 with latest revision including12mmx3meter long8 no. Connecting Rodsmade of bright bar electrogalvanized fitted with coupler & normal stand assembly recommended for use with cylinder assembly suitable for bore well casing pipe. |
| 89 | Cost of 32 mm dia GI pipe (Medium) 3 Mtrs long screwed at both ends with seamless socket as per IS:1239 (Part 1990). |
| 90 | Cost of 125 mm dia blue UPVC Casing Pipe as per I.S.12818/2016 CML no.- 5543459 |
| 91 | GST @18% |
| 92 | LABOURCESS @1% Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 29, 2026
11:30 IST
Tender Published
Tender notice published.
TodayNov 04, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysNov 05, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender