Tender For Special Repair Of Bldg No T-77 (Or Cook House) And T-75 (Or Line) Of Mech Bde Sign Coy At Mil Stn Beas Under Ge Kapurthala
Tender Value
26.88 Lakhs
Estimated cost
Bid Submission
19 Nov 2026
16 days left
EMD
53760
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kapurthala → Punjab
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Repair Of Bldg No T-77 (Or Cook House) And T-75 (Or Line) Of Mech Bde Sign Coy At Mil Stn Beas Under Ge Kapurthala
BOQ
| Sl. No. | Item Description |
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority : Garrison Engineer Kapurthala Name of Work : Special repair of Bldg No T-77 (OR cook house) and T-75 (OR line) of Mech Bde Sign Coy at Mil Stn Beas under GE Kapurthala Contract No : GE KPT- /2026-27 Bidder Name : SCHEDULE OF WORKS(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # S.No Description of work Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency RATE In Figures To be entered by the Bidder Rs. Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words |
| 2 | Demolition of brick work or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc; but excluding ashlar facings, dressed stonework and precast concrete articles, complete all as specified and directed. |
| 3 | Dismantling of asbestos cement (corrugated, semi-corrugated, etc.) sheets in roof coverings including ridges, complete all as specified and directed. |
| 4 | Taking down framed trusses of span not exceeding 10m, complete all as specified and directed. |
| 5 | Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and directed. |
| 6 | Dismantling of ceiling boards (fibre, pulp, insulation, etc;) or insulation boards/slabs/blankets, any thicknness, including cover fillets, complete all as specified and directed. |
| 7 | Taking down chowkats or frames with shutters not exceeding 1.5 sqm each (without taking off shutters from the frames), complete all as specified and directed. |
| 8 | Taking down chowkats or frames with shutters exceeding 1.5 sqm but not exceeding 4 sqm each (without taking off shutters from the frames), complete all as specified and directed. |
| 9 | Taking down cement or cement lime plaster, any description on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water, etc; complete all as specified and directed. |
| 10 | Demolition reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 11 | Demolition cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 12 | M&L for brick work with subclass ‘B’ bricks, straight or curved on plan exceeding 6m mean radius built in cement mortar 1:6, complete all as specified and directed. |
| 13 | S&F of pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed. |
| 14 | S&F of pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed. |
| 15 | Erection and fixing only steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240, complete all as specified and directed. |
| 16 | Erection and fixing only steel tubular work as in purlins including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240, complete all as specified and directed. |
| 17 | M&L for mild steel work in tubular trusses including spcial shaped washer, vertical Post, including bracket, tee, distance pieces, cleat etc; complete using ERW or induction butt welded tubes, conforming to IS 1161-1979 grade St-240 complete all as specified and directed. |
| 18 | M&L for steel tubular work as in purlins including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240, complete all as specified and directed. |
| 19 | M&L for plates (plain or chequered) square cut or notched (ordinary and counter sunk) forming holes, with or without any attachment complete all as specified and directed. |
| 20 | M&L for preparation of old steel surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint, complete all as specified and directed. |
| 21 | M&L for preparation of new steel surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint, complete all as specified and directed. |
| 22 | M&L for reinforced cement concrete Type B1, 1:2:4 (20mm graded aggregate)in lintels upto 1.5m clear span, cill, bands, plinth courses, coping etc; and similar work, including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed. |
| 23 | M&L for reinforced cement concrete Type B1 1:2:4 (20mm graded stone aggregates) slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed. |
| 24 | M&L for form work to sides and sofits of floor or roof beam, girders,lintel, cantilever, shelves including supports overhangs, opening of concrete walls, side of RCC/PCC band and lintel in walls, horizontal or slope and similar work complete all as specified and directed. |
| 25 | M&L for formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs height exc 5cm but not exc. 10cm complete all as specified and directed. |
| 26 | M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to IS, complete all as specified and directed. |
| 27 | - Ditto - all as per item No 25 above but 5mm dia and over upto and including 10mm dia in stirrups, spaces and binders, complete all as specified and directed. |
| 28 | M&L for rendering 15mm thick on fair faces of brick or concrete surfaces in cement mortar 1:6 on walls finished even and fair, complete all as specified and directed. |
| 29 | M&L for rendering 15mm thick on fair faces of brick or concrete surfaces in cement mortar 1:4 on walls finished even and fair, complete all as specified and directed. |
| 30 | M&L for rendering 10mm thick on fair faces of brick or concrete surfaces in cement mortar 1:4 on ceiling and soffit of shelves finished even and fair, complete all as specified and directed. |
| 31 | M&L for preparation of new plastered surfaces and applying two coats of exterior emulsion paint over and including a coat of primer on plastered surfaces of walls, complete all as specified and directed. |
| 32 | M&L for preparation of new plastered surfaces and applying two coat of oil bound distemper over a coat of 2mm thick putty for the surface even and smooth complete all as specified and directed. |
| 33 | M&L for preparation of new plastered surfaces and applying two coat of oil bound distemper over a coat of appropriate primer for the surface even and smooth complete all as specified and directed. |
| 34 | M&L for applying one coat of wall care putty not more than 2mm thick complete all as specified and as directed. |
| 35 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed .. |
| 36 | M&L for machine cut kota stone slab flooring 18-20mm thick over cement screed bed 20mm thick cement mortar 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete complete all as specified and directed. |
| 37 | M&L for hardcore of gauge n.exc 63 mm, deposited, spread and levelled in layers n.exc 15 cm thick, watered and rammed to a true surface complete all as specified and as directed. |
| 38 | M&L for 100mm thick cement concrete type C2 1:4:8 (40mm graded stone aggregate) in sub base, complete all as specified and directed. |
| 39 | M&L for virified ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles exc 0.42 sqm but n exc 1.00 sqm, in floors etc over and including 15 mm thick screed bed in cement and sand mortar 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, complete all as specified and directed. |
| 40 | M&L for virified ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles exc 0.42 sqm but n.exc 1.00 sqm, as in skirting/dado etc; over and including 10 mm thick plaster in cement and sand mortar 1:4, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile, complete all as specified and directed. |
| 41 | M&L for glazed ceramic tiles in vertical surface 450X 300X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over 10mm thick cement mortar 1:4 complete all as specifeid and directed. |
| 42 | M&L for 16-18mm thick zed black granite machine cut in any position bull nosed on front face, laid over cement screed and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing over and including 15 mm thick screed bed in cement and sand mortar 1:4 complete all as specified and directed. |
| 43 | M&L for rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations, complete all as specified and directed. |
| 44 | M&L for 75mm thick cement concrete type B-1, 1:3:6 (40mm graded stone aggregate) as in plinth protection finished even and fair laid to a slope of 1 in 20 in alternate bays, each bay not exceeding 3m in length with joint complete all as specified and directed. |
| 45 | M&L for ceiling using 8-9mm thick gypsum based ceiling tiles with wheather resistance face on back side and vinyl finish at front including GI frame work of grid 600x600 mm size, the members of snap grid frame work of GI/Steel section of 24mm wide with T-flanges, channels etc of white colour having rotary stiching on all members, i.e main runner, 1200x600mm cross tee galvanised with suitable thickness of 120 gms per/sqm and hanging the same with roof members such as rafters, pulins or other members with 6mm dia line wire to maintain stability and levelled the structure complete all as specified and directed. |
| 46 | S&F of 6mm thick PVC hollow wall paneling, plain/coloured/printed fixed with screws to wall and corner, edges of panels be sealed with appropriate arrangement channel & tees incl, colour and pattern as approved complete all as specified and as directed. |
| 47 | S&F of pressed steel frames of size 125 x 60 mm for doors with one or more rebates incl necessary fixing lugs,hinges, lock strike plate, in frames/hold fast blocks complete all as specified and directed. |
| 48 | S&F of factory made single extruded WPC (Wood polymer composite) solid door/ window/ ceosetory windows & other frames/ chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ necessary arrangements of required dia and length, complete as specified and directed. |
| 49 | S&F of factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete as specified and directed. |
| 50 | S&F of factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panel will be of wire gauze in lieu of PVC sheet panel.The wire gauge shall be stretched to tighten firmly complete all as specified and directed. |
| 51 | S&F of powder coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc, complete all as specified and as directed. |
| 52 | S&F of powder coated aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc; complete all as specified and as directed. |
| 53 | S&F of box type steel windows/ventilators comprised of tubular frame and shutters made out of 1.25mm thick M S sheet tube factory made with double side shutters wire gauged shutter & glass glazed shutter (wire cloth and glass panes shall be measured and paid separately) with side hung shutters with steel handle and steel peg stay dovetailed or welded incl 2 Nos. tower bolts 150mm long for each leaf and 10mm square bar grills at spacing as shown on drg welded to F I frame work, including other fittings; hinges, handles, tarred hold fasts, PCC blocks etc complete all as specified and directed. |
| 54 | S&F of 150mm long aluminium anodised barrel tower bolts of extruded section ISI marked complete all as specified and as directed. |
| 55 | S&F of 150mm long aluminium handles cast type anodised ISI marked complete all as specified and directed. |
| 56 | S&F of Butt hinges 100mm size medium weight cold rolled mild steel in door complete all as specified and directed. |
| 57 | S&F of 250mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing in door shutter complete all as specified and directed. |
| 58 | S&F of aluminium body door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg complete all as specified and as directed. |
| 59 | S&F of 300 mm size mild steel ordinary rat tail rod pattern springs including roller and roller plate, ISI marked complete all as specified. |
| 60 | S&F of Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and as directed. |
| 61 | S&F of 4mm thick sheet glass, ordinary quality and glazing with beads fixed with metal pins or glass putty in square not exceeding 0.5 sqm in each pane complete all as specified. |
| 62 | S&F of floor door stopper 140mm of aluminium alloy body and tongue anodized with hard drawn steel spring fixed in floor all as specified and directed. |
| 63 | S&F of 20 mm bore stainless steel curtain rod with 1 mm thick wall thickness including a pair of brackets and knobs with each length/ piece, fixed on doors and windows opening for hanging curtains complete all as specified and directed. |
| 64 | S&F 15mm bore galvanized steel water tubing, medium grade with all fittings fixed to wall, ceiling or laid in floors complete all as specified and directed. |
| 65 | S&F of PVC (SWR) pipe, 110mm dia pipe, single socketed in any length with rubber ring joints, etc complete all as specified and as directed. |
| 66 | S&F in repair, 15mm bore stop valve/angle valve , cast copper alloy with crutch , chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or unions and fixed, complete all as specified and directed |
| 67 | S&F of 15mm bore bib tap long body, cast copper alloy with crutch , chromium plated, fancy type, screwed down, screwed for iron pipe and fixed, complete all as specified and directed. |
| 68 | S&F of 110 mm bore PVC (SWR) bend, complete all as specified and directed. |
| 69 | M&L for chequered cement concrete tiles 30cm x30cm x25mm thick set jointed and pointed in neat cement slurry in floor/path over 20mm thick screed bed in cement mortar 1:4 complete all as specified and as directed. |
| 70 | Excavating in trenches for soft and loose soil, n.exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc; or for shafts, wells, cesspits, manholes, pier holes, etc; n.exc 10 sq m on plan and n.exc 1.5 m in depth and getting out complete all as specified and directed. |
| 71 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed. |
| 72 | Removing excavated soil n.exc 50m and depositing where directed at a level n.exc 1.5 m above the starting point complete all as specified and directed. |
| 73 | Taking down carefully aluminium / copper point wiring (light, fan, socket, powerpoint) including batten, conduit and fittings such as switches, ceiling rose, sockets, brackets, light fittings, switch board etc, making good distrubed surfaces of wall, floar, ceiling etc; complete all as directed. |
| 74 | M&L for point wiring for one light / fan / bell point with 1.5 sqmm cable PVC unsheathed and insulated copper multistranded conductor ( FRLS ) 1100 Volts grade cable ( red colour cable to be used for live connection and black colour cable to be used for neutral connection ) controlled by one way switch drown through and including PVC concealed conduit ( Modular Fitting) with all accessories including 1.5 sqmm copper multistrand conductor (FRLS ) 1100 Volts grade unsheathed PVC insulated ( green colour ) continuity earth wire connected to common earth dolly and sunk cast pressed steel metal flush mounting box for mounting of fittings like switch , socket and fan regulator and cover plat of suitable modules capacity and make of swich socket complete all as specified and directed. |
| 75 | One light point controlled by one, one way switch complete all as specified and directed. |
| 76 | One fan point controlled by one, one way switch complete all as specified and directed. |
| 77 | One socket outlet 3 Pin, 5 Amp on independent board complete all as specified and directed. |
| 78 | One socket outlet 3 Pin, 5 Amp on same board complete all as specified and directed. |
| 79 | - ditto - all as per item No 73 here in before but 2.5 Sqmm PVC insulated un sheathed cable with stranded copper conductor for 6 pin 6/16 Amp switch socket combination on independent board complete all as specified and directed. |
| 80 | M&L for ceiling rose, surface bakelite 65 x 17.50 mm of three terminals PVC/Polycarbonate,isolated body (ISI Marked) complete all as specified and directed |
| 81 | S&F of PVC/Polycarbonate Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings type with back plate suitable for batten fittingscomplete all as specified and as directed. |
| 82 | S&F of modular switch 6 Amp 250 V AC one way one module complete all as specified and directed. |
| 83 | S&F of modular switch 16 Amp 250 V AC one way with indicator one module complete all as specified and directed. |
| 84 | S&F of modular socket, 6A - 2/3 pin combined 2 module complete all as specified and directed. |
| 85 | S&F of modular socket 6A/16A - 2/3 pin combined 2 module complete all as specified and directed. |
| 86 | S&F in repair modular fan regulator step type, 120W - 2 module complete all as specified and directed. |
| 87 | Supply, installation, testing and commissioning of 20 watt 4 ft long LED Batten housing made of extruded alluminium with milky white diffuser and inbuilt electronic driver system lumen output should be at least 1800 lumen with a CCT of 6000 K, power factor should be greater than 0.9 with all accessories and connecting up complete with 3 core flexible cable white of size 23/0.0076 complete all as specified and directed. |
| 88 | Supply and fixing LED security light fitting 35 watt Pressure die cast aluminium housing, heat resistant toughened glass with frame IP 66 Protection cat Part No LSTN-30-CDL complete fitting including 1.5 mtr long 40/50 mm (Suitable size for fixing of LED light fitting) bore GI pipe mounting bracket/Clamp made to shape for fixing on pole with 40 mm x 6 mm flat iron clamp 02 numbers with 16 mm dia bolts, nuts and washers complete all as specified and directed. |
| 89 | S&F in repair sheet metal enclosure for MCB DB double door Single pole & Neutral 8 way with 200 Amps rated bus bar complete all as specified and directed. |
| 90 | S&F in repair sheet metal enclosure for MCB DB double door Single pole & Neutral 12 way with 200 Amps rated bus bar complete all as specified and directed. |
| 91 | S & F TP&N Vertical DB 4 way with MCCB 100 Amp 3 Pole ,as Incomer with Bus Bars, MCB SP 6 to 32 Amp -12 Nos ,Neutral Links, Blanking Plates complete all as specified and directed by Engr-in charge. |
| 92 | S&F in repair SP 6 To 32 AMP amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning. complete all as specified. |
| 93 | - do- but TPN 40 to 100 AMP complete all as specified and directed. |
| 94 | S&F of ceiling fans, complete with three blade, down rod, accessories 230V, 1200mm sweep, with bushless direct current motor ( BLDC) omplete all as specified and directed. |
| 95 | S&F of exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz,RPM 1200, Copper winding of sweep 250mm omplete all as specified and directed. |
| 96 | S&F of exhaust fan made of steel body AC Single phase voltage 230V, size 380mm sweep with , blades, and frame and louvers complete all as specified and directed by engr -in -charge. |
| 97 | S&F of water heater storage type electric, capacity 25 litres BEE 5 star BEE rating AC 230 volts, 50 Hz vertical type including material and labour for grouting four Nos rack bolt for holding of water heater on wall including making good and match existing surfaces and complete all as specified and as directed. |
| 98 | Supplying, Laying, jointing and testing XLPE PVC insulated & PVC sheathed LT cable, 1100 volts grade (heavy duty )with stranded aluminium conductor, cross sectional area 35 Sqmm 3.5 core fixed along the poles or passing through pipes or laid under floors or through walls complete all as specified and directed.Note:- Earthwork, sand cushioning, brick protection and GI pipe to be measured and paid for separately under respective items. |
| 99 | M&L for sand cushioning with a layer of sand 8cm thick before laying of cable and 15 cm thick after laying of cable in trenches complete all as specified. |
| 100 | M&L for old size sub class 'B' bricks laid flat in trenches over the cable with the length of brick perpendicular to the direction of cable length, adjacent/abutting each other complete all as specified and directed. |
| 101 | M&L for earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick surrounded with charcoal and salt, buried directly in ground (earth pit not less than 2.25 metre deep below ground level) with top edge of plate not less than 1.5 metre below normal ground level connected to galvanized earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical Plate No 3 of MES SSR Part-I connected to main switch board or main control board all as specified and testing on completion including provision of earth wire protected by galvanized iron 15 mm dia light grade pipe and watering pipe shall be 20 mm bore light grade including all excavation and earth work in any type of soil, PCC pit with pre-cast RCC cover, charcoal/salt, funnel etc; omplete all as specified and directed. Total in Figures 0.0 0.0 INR Zero Only Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 29, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 19, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 16 daysNov 21, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 18 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender