Tender For Repairing And Restoration Work Of Lighting Arrangement At Priyanath Mukherjee Road, Seth Pukur Road, K.P.S Road And Other Different Places In Ward No-06 Under Br-I
Tender Value
2.64 Lakhs
Estimated cost
Bid Submission
06 Nov 2026
5 days left
EMD
5300
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kolkata → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repairing And Restoration Work Of Lighting Arrangement At Priyanath Mukherjee Road, Seth Pukur Road, K.P.S Road And Other Different Places In Ward No-06 Under Br-I
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling steel tubular/Rail/Strut embedded in CCfoundation incl. excavation, filling of holes, restoring surface,loading at site and delivering, unloading, sorting, stacking properly at any place as per direction upto a lead of 1.6 km |
| 2 | Dismantling of OH line comprising of copper/AAC/ACSRconductor, cross arms / `D... iron clamps / brackets / `V... brackets etc. insulators, earthwire, cradle guard, safety devices, staywire etc., incl. sorting out, rolling the conductors, stacking, loading at site anddelivering, unloading , measuring the conductors, sorting, stacking properly at any place as per direction upto a lead of 1.6 km (a) OH line comprising of single phase, neutral & earth wire |
| 3 | Replacing Galv. (Hot Dip) MS earth clamp 380x25x3 mmsize complete with bolts and nuts etc. as required on pole (as per specification) FOR fastening earth wire incl. painting |
| 4 | Supplying & Erection of Galv. `D... iron complete withsuitable pole clamp 75mmx88mm porcelain shackle insulator & 15 mm dia Galv. bolts & nuts. incl. painting |
| 5 | S&D of Galv. Straining screw 12\\"x5/8\\" dia |
| 6 | S&D of 150mm GI pipe (ISI-Medium) |
| 7 | Cutting to requisite length or shape departmental R.S. joists,channels, angles, tees, plates etc.(Payment to be made on area of cut surface) |
| 8 | Welding in M.S. structural work with gas or electric: (a) Tack weld |
| 9 | Erection of Poles.Erection of Single Steel tubularpole of length as given below with/without sole plate & Cap etc. in CC foundation (Proportion and dimension indicated below), having 600x600x150 mm thick CC (4:2:1) base block below sole plate/polewith hard jhama metal including CC (6:3:1) muffing 0.30 mts. dia and 0.30 mts. above ground level including 3 mm thick neat cemented finish and GI earth bolt after making drilled holes etc. on pole & carriage of pole upto 1.6 Km from Store to work(site including filling up the excavated earth pit with shifted soil and ramming properlyUpto 9.0 mtr. Size 0.6x0.6x1.70 mts |
| 10 | Earthing Installation ... with Pipe Electrode.Earthingwith 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (HOT Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below:(a)By ISI MediumGI pipe. |
| 11 | Extra on items 1& 2 above, FOR providing CC (6:3:1) base block around the pole) dimension 0.45x0.45x0.60 mt. above ground level, neatly cemented finish (3) mm thick), at the base pole (in lieu of CC muffing) incl. drilled hole in pole suitable FOR alkathene/polythenepipe entry, FOR street light wiring, without Loop Box |
| 12 | Supplying Al.conductor PVC insulated and sheathed unarmoredcable (1.1KVgrade, Gloster/Havells/Polycab). 10sqmm x 2core |
| 13 | Supply and drawing of 7/14 SWG galvanised stranded wire for drawing unarmored cable (supply of cable is not included in the scope) by catenary system of wiring with 3nos. reel insulator per mtr.and binding with binding wires etc,as reqd. for drawing |
| 14 | Supplying Al.conductor PVC insulated and sheathed unarmoredcable (1.1KVgrade, Gloster/Havells/Polycab). 6sqmm x 2core |
| 15 | Laying of cable upto 2 core 25 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (HOT Dip) Wire, making holes etc. as necy. mending good damages and painting |
| 16 | Supplying and Drawing 1.1 KV single core stranded 'FR' PVC insulated & unsheathed single core stranded copper wire (Brand(approved by EIC) of the following sizes in the prelaid polythene pipe and by the prelaid GI fish wire and making necy. connection as required 3 x 22/0.3 (1.5 sqmm) |
| 17 | SUPPLYING & DELIVERY OF SINTEX 2(BOTTOM SIDE) AND 2 (TOP SIDE) FRP WHITE WATERPROOF TYPE LOOPING CABLE BOX SIZE 300X200X125 MM DEEP, 4 MM THICK, HAVING INSULATION RESISTANCEGREATER THAN 200 MEGA OHM, IP66; COMPRISING OF ONE NO SPMCB, 4 NOS. TERMINAL CONNECTOR HAVING VOLTAGE GRADE OF 1.1 KV, ONE COMPRESSION TYPE BRASS CABLEGLAND FOR UPTO 4 CORE16 SQMM PVC/A CABLE AS PER RATE OBTAINED FROM GEM PORTAL |
| 18 | Fixing only TPN MCBDB in Sheet Steel enclosure (4 to 12 way) on flat iron frame on wall 415V TP/TPN |
| 19 | Installation the feeder pillar box only on cement brick foundation including plastering and neat cementing as per specification and direction of E.I.C. b) For medium size feeder pillar box. |
| 20 | Supplying of 1.1 KV. Grade PVC insulated Conductor of following cables (make: Polycab/ Gloster/Havells/):Size in Sq. mm, No & dia. of wire in mm , No of Core - 16 7/1.70 4 |
| 21 | Laying only Cable upto 50 sqmm through existing RCC/Hume/ GI Pipe/open masonary trenchFOR single, 2, 3, 3... & 4 core |
| 22 | Laying of one No. cable upto 35 sqmm in underground trench 460 mm wide x 760 mm averagedepth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per metre, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surfaceduly rammed |
| 23 | Supplying and fixing compression type glandcomplete with brass gland, brass ring & rubber ring FOR dust & moisture(proof entry of XLPE/PVC armoured cables as below : FOR 4 core.(iv)upto 16 sqmm |
| 24 | Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixingsolderless socket (Dowels make), tapes, anticorrosive paste & jointing materials.(4 core 16 sqmm cable |
| 25 | Supplying of Swaged Steel Tubular pole as per IS2713, Pt. II, 1980 for following designation and of following dimensions.(Outside dia & thickness are given in Annexture -1)g) 410 SP - 21 ; 8.5 Mtr., 129.00 Kg. |
| 26 | Painting of Steel Tubular Pole of lengths and no. of coats of paint, as given below with ready mixed paint/primer of(approved make, andbrand incl. preparation of surface by sand paper/emery paper, cleaning etc. FOR receiving fresh coat of paint.Upto 9.0 mtr. long pole.(i)1st coat of aluminium paint over 1 coat of RO priming |
| 27 | Painting of Steel Tubular Pole of lengths and no. of coats of paint, as given below with ready mixed paint/primer of(approved make, and brand incl. preparation of surface by sand paper/emery paper, cleaning etc. FOR receiving fresh coat of paint.Upto 9.0 mtr. long pole.ii2nd coat of aluminium paint over 1st coat |
| 28 | S/F fabricating, welding, G.I. junction and 2.1 M long double arm projected bracket made of 2\\" dia G.I. pipe (ISI medium) with 2 nos. thro... bolts & nuts of 175 mm(7\\") long 15.6 mm (5/8\\") dia junction with set screw etc. complete as per per direction of Engineer-In-Charge |
| 29 | S/F of special head type M S loop box (3 mm thick) with connecting bar and other accessories fixed on the top the pole as required and as per direction of Engineer-In-Charge. For 3 phase connection. |
| 30 | Sub Total |
| 31 | GST 18% |
| 32 | CESS 1% Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 29, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 06, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysNov 06, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender