Tender For General-Servicing And Repairs Of Ug Pump Room Machines-Govt Medical College, Palakkad-General Electrical Work
Tender Value
Ref. Documents
Estimated cost
Bid Submission
06 Nov 2026
6 days left
EMD
10571
Bank guarantee accepted
Document Fee
935
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Palakkad → Kerala
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for General-Servicing And Repairs Of Ug Pump Room Machines-Govt Medical College, Palakkad-General Electrical Work
BOQ
| Sl. No. | Item Description |
| 1 | service and repairs |
| 2 | OD168601/2026-2027:General servicing & maintenance of induction motor motor driven centrifugal pump 100 HP for fire fighting including lifting the 100 HP motor after disconnecting the wire connection, decoupling the pump, detaching from the base plate, starters, TP switches etc. using chain block, rope, chain etc. and placing them conveniently on the platform. dismantling of pump, motor and starter as required; cleaning and removal of silt, mud, foreign bodies and water deposits due to flooding; drying and cleaning of motor and electrical components; insulation resistance testing by megger, checking winding condition, terminals and cable connections; cleaning, greasing and lubrication; changing of oil wherever required; checking and correction of pump-motor alignment; inspection and servicing of bearings; renewal of gland packing, gasket and rubber packing wherever required; checking pump shaft, sleeves, impeller, casing and coupling; replacement of damaged coupling rubber bush and coupling bolts; overhauling, cleaning and reconditioning of starter including contactors, overload relay, terminals, internal wiring etc.; reconditioning of damaged parts; refitting, testing and commissioning under full-load operating conditions; painting of pump, motor and associated components with suitable primer and two coats of approved enamel paint; including all labour, tools, tackles, consumables, transportation within site Reerecting the 100 hp motor in pump room Refitting motor, starter and other electrical accessories,( Accessories when necessary ) and erecting the motor on the base plate coupling with pump in position giving connections checking correct alignment and trial run on full load and all incidental works complete as directed by the Engineer-in-Charge |
| 3 | OD168602/2026-2027:General servicing & maintenance of induction motor motor driven centrifugal pump 7.5 for fire fighting including lifting the 7.5 HP motor after disconnecting the wire connection, decoupling the pump, detaching from the base plate, starters, TP switches etc. using chain block, rope, chain etc. and placing them conveniently on the platform. dismantling of pump, motor and starter as required; cleaning and removal of silt, mud, foreign bodies and water deposits due to flooding; drying and cleaning of motor and electrical components; insulation resistance testing by megger, checking winding condition, terminals and cable connections; cleaning, greasing and lubrication; changing of oil wherever required; checking and correction of pump-motor alignment; inspection and servicing of bearings; renewal of gland packing, gasket and rubber packing wherever required; checking pump shaft, sleeves, impeller, casing and coupling; replacement of damaged coupling rubber bush and coupling bolts; overhauling, cleaning and reconditioning of starter including contactors, overload relay, terminals, internal wiring etc.; reconditioning of damaged parts; refitting, testing and commissioning under full-load operating conditions; painting of pump, motor and associated components with suitable primer and two coats of approved enamel paint; including all labour, tools, tackles, consumables, transportation within site Reerecting the 7.5 hp motor in pump room Refitting motor, starter and other electrical accessories,( Accessories when necessary ) and erecting the motor on the base plate coupling with pump in position giving connections checking correct alignment and trial run on full load and all incidental works complete as directed by the Engineer-in-Charge |
| 4 | OD151723/2026-2027: General servicing, maintenance, checking, overhauling and testing of existing 50 HP diesel engine for fire-fighting pump, including removal of mud, silt, water deposits and foreign bodies due to flooding; cleaning of engine and associated components; checking and replacement of engine lubricating oil, oil filter, fuel filter and air filter wherever required; checking fuel system, fuel lines, fuel pump, injectors, cooling system, radiator, water pump, belts, hoses, battery and battery connections; draining and refilling contaminated oil; checking starting system, electrical connections and charging system; checking engine mounting and alignment with pump; checking coupling and coupling bolts; cleaning, greasing and lubrication of all applicable moving parts; checking engine controls, gauges and safety devices; testing of insulation of associated electrical wiring wherever applicable; checking for abnormal noise, vibration, leakage and overheating; attending minor repairs and adjustments; refilling of oil/coolant and other necessary consumables; starting, trial running and performance testing of the engine under operating conditions, including all labour, tools, tackles, consumables and incidental works complete as directed by the Engineer-in-Charge |
| 5 | OD136616/2026-2027:Supply of engine oil |
| 6 | OD137796/2026-2027:Supply of Diesel Engine Oil Filter |
| 7 | OD136642/2026-2027:Supply of engine coolant |
| 8 | OD136725/2026-2027:Supply of diesel for testing. |
| 9 | OD136869/2026-2027:Supply of Exide make 12V, 180Ah heavy-duty automotive battery suitable for diesel engine starting, |
| 10 | OD137787/2026-2027:Supply of 10A12V Battery charger |
| 11 | OD136876/2026-2027:General servicing, checking and maintenance of existing fire-fighting pump electrical control panel comprising 630 A, 4-pole incomer isolator, multifunction meter, LED indicating lamps, 2 Nos. 250 A FP SDUs for main fire-fighting pumps, 2 Nos. 63 A FP SDUs for jockey pumps and 1 No. 32 A FP SDU for diesel pump battery charging, including isolation and dismantling of panel components as required, removal of mud, silt, water deposits and foreign bodies due to flooding, cleaning and drying of all electrical components, checking insulation resistance and continuity, checking and tightening of all busbar, cable and control connections, checking operation and condition of isolator, SDUs, meters, indicating lamps and control wiring, rewiring of main control panel including necessary control cables, ferrules, lugs, sleeves and other accessories, replacement of damaged minor wiring and terminals, cleaning and reconditioning of components, testing and commissioning of the complete panel after servicing, including all labour, tools, tackles, consumables and incidental works complete as directed by the Engineer-in-Charge. |
| 12 | OD137158/2026-2027:Rewiring of Diesel Engine Control system including necessary cables, connectors etc |
| 13 | OD136905/2026-2027:Supply & repalcing of MNX 135 contactor suitable for Main pump |
| 14 | OD137765/2026-2027:Supply & repalcing of MNX 110 contactor suitable for Main pump |
| 15 | OD136910/2026-2027:Supply & repalcing of MNX 32 contactor suitable for jockey pump |
| 16 | OD137846/2026-2027:Supply and replacement of minor spares |
| 17 | OD178359/2026-2027:Charges for disconnecting 3.5C 95 sq.mm XLPE incomer cable from the existing panel on both sides attending pettty repairs and transporting the cable to nearest electrical room for safe keeping. |
| 18 | 90.12.7.31:Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of the following sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.3.5 core 95 sq mm Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 29, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 06, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysNov 09, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 9 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender