Heavy Industries and Public Enterprises Government Departments Closing in 5 days TDR #58269546

Tender For Repairs To Damaged Jri Shed In New Facility At Hvf, Avadi.

Issued by Government Departments · Thiruvallur, Tamil Nadu
Tender Value
36.81 Lakhs
Estimated cost
Bid Submission
26 Nov 2026
5 days left
EMD
74000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Thiruvallur → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Tender for Repairs To Damaged Jri Shed In New Facility At Hvf, Avadi.

Corrigendum

Sr No Corrigendum Date Corrigendum Type New Submission Date
1 12-Nov-2026 Bid Auto Extn Corrigendum Bid Auto Extn Corrigendum 26-Nov-2026

BOQ

Name of Work:- REPAIRS TO DAMAGED JRI SHED IN NEW FACILITY AT HVF, AVADI.
Sl. No. Item Description
1Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres lead
2Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead
3Dismantling tile/ Granite work in floors and walls laid in cement mortar including stacking material etc inlcuding lifting, transport, labour, tolls etc all complete within 50 metres lead for thickness of tiles 10 mm to 25 mm
4Repairing of existing steel windows shutter of any size and any no of shutters which are hanging from position by cutting the old ones and refabricating the hinges to suit the existing frame including repairing of window frame / sash bars if any required
5Roughening surfaces of old concrete surface (floor) by picking, sweeping clean and washing down with water to remove dust, etc.
6Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering -All work up to plinth level for 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources)
7M & L for providing RCC M25 concrete design mix 20mm garded aggregates in Beams, cantilevers bressummers, lintels over 1.5m span
8M & L for Formwork to flat sides & soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams for Fair Finished surface, etc.
9S & F of mild steel reinforcement deformed or twisted bars 10 mm dia and over, cut to length, bent to shape required, including cranking,bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips.
10Supply and fixing of mild steel reinforcement TMT bars 8mm dia to 6 mm dia over, cut to length, bent to shape required, including cranking,bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips.
11Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level for 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)
12Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in Cement mortar 1:6 (1 cement : 6 coarse sand)
13Material & labour for cement plastering with CM(1:4) 15 mm thick wall plastering on fair faces of brick wall or concrete surface.
14M & L for plastering in CM 1:6, 15mm thick on fair faces of brick work, concrete surfaces and Door & Window Jamb plastering.
15Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622 , of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) jointing with grey cement slurry @ 3.3kg/sqm including grouting the joints with white cement and matching pigments etc., complete. - Size of Tile 600 x 600 mm
16Providing & fixing false ceiling at all heights with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of Size 595x595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC0.50 to 0.75 as per IS 8225:1987, Non combustible as per BS 476 (part 4)-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on inter-locking metal T-Grid of hot dipped galvanised iron section of 0.33 mm thick (galvanized @ 120 gram per sqm including both sides) comprising of main-T runners of size 15x32 mm of length 3000 mm, cross - T of size 15x32 mm of length 1200 mm and secondary intermediate cross-T of size 15x32 mm of length 600 mm to form grid module of size 600 x 600 mm,suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x2 mm. Galvanised iron perimeter wall angle of size 24x24x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40 mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge With semi perforated 12 mm thick micro tegular edged GRG false ceiling tiles.
17Providing and fixing factory made uPVC glazed/wire mesh windows/ doors comprising of lead free uPVC multi-chambered frame, sash and mullion/coupler (where ever required) extruded profiles having minimum wall thickness of 1.70 mm for Series R1 and R2 profiles and 2.10 mm for Series R3 and R4 profiles conforming to EN: 12608 in any shape,colour and design duly reinforced with galvanized mild steel section made of required shape & size as per CPWD Specification, uPVC extruded glazing beads, interlocks and Inline sash adaptor (where ever required) of appropriate dimension, EPDM gasket, hardware, SS 304 grade fasteners of minimum 8 mm dia with countersunk head, comprising of matching polyamide PA6 grade sleeve for fixing frame to finished wall as per IS 1367 : Part 1 to 14, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame, sash & mullion (if required) shall be mitred cut and fusion welded/mechanically jointed duly sealed at all corners, including drilling of holes for fixing hardware and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of approved size and quality, all complete as per approved drawing conforming to CPWD specification & direction of Engineer-in-Charge. Section of steel reinforcement and cross sections of uPVC profiles to be as per design approved by Engineer-in-Charge. Wire mesh / Glazing of plain/ toughened/ laminated/ double glass unit with / without high performance coatings as per design requirements and conforming to IS: 3548 & IS: 16231 shall be paid separately.Note:- Structural design proof checked from a Government Engineering Institute, to be provided by the manufacturer for :(i) Sites with basic wind speed > 45 m/sec as per IS 875 – Part 3 (ii) Sites with structure height more than 20m for all wind speeds for Two track two panels sliding window with Aluminium channel for roller track, wool pile, nylon rollers with SS 304 body. Using R2 series with frame (40 mm & above) x (40 mm & above) & sash (25 mm & above) x (50 mm & above) with zinc alloy (zamak) powder coated touch locks with hook (Height upto 1.2 metre)
18Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with for 5.5 mm thick glass panes
19Providing and fixing hard drawn steel wire fabric 75x25 mm mesh of weight not less than 7.75 Kg per sqm to window frames etc. including 62x19 mm beading of second class teak wood and priming coat with approved steel primer all complete
20S & F of Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. with powder coating. complete all as specified. (minimum thickness of powder coating 50 micron)
21M & L of 12mm thick Prelaminated particle board, interior grade, prelaminated on both sides with decorative choice lamination fixed with screws to timber frame work.
22Supply and Fixing of Anodised aluminium door shutters,for powder coating of any colour (Thickness or powder coating not less than 50 micron) aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. .complete all as specified
23S & F of Mild steel 4 lever Rebated mortice lock, vertical type,size 100 mm
24Providing and fixing aluminium tower bolts 150x10 mm , ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete
25Providing and fixing 250x16 mm aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete
26Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete.
27Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete with Twin rubber stopper
28Providing and fxing M.S. Tubular frames for doors, windows, ventilators and cupboard with rectangular/ L-Type sections, made of 1.60 mm thick M.S. Sheet, joints mitred, welded and grinded finish, with profiles of required size, including fxing of necessary butt hinges and screws and applying a priming coat of approved steel primer.Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)
29M & L for Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work. The paint to be used shall be of Asian paints, Berger paints, Nerolac paints or suitably equivalent make. The brands shall be got approved by EIC
30M & L for Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work The paint to be used shall be of Asian paints, Berger paints, Nerolac paints or suitably equivalent make. The brands shall be got approved by EIC
31Material and labour for applying one coat of wall primer for exterior / Interior as required at site all complete Including preparation of complete removal of surfaces and old putty surfaces. The primer to be used shall be seperate for the interior walls and exterior walls. The primer to be used will depend on the recommendation by the manufacturer for the type of interior emulsion and exterior emulsion to be used as directed. The paint to be used shall be of Asian paints, Berger paints, Nerolac paints or suitably equivalent make. The brands shall be got approved by EIC.
32M&L for applying Colour washing such as green, blue or buff to give an even shade on New work (two or more coats) with a base coat of white washing with lime.
33Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete.
34M&L for applying two coats of plastic emulsion on internal wall surfaces including preparation of old wall surfaces complete all as directed. The plastic interior Emulsion shall be of premium interior emulsion manufactured by reputed companies such as Asian paints ( premium emulsion or apcolite suprema premium Emulsion) , Berger paints ( Rangoli) Nerolac paints ( Beauty Gold) or suitably equivalent make. The brands shall be got approved by EIC.
35M & L for painting to wooden surfaces of any description over 10cm width or girth with Two coats of synthetic enamel paint. Pink primer including preparing old wooden surfaces.
36Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required with 0.63 mm thick with zinc coating not less than 275 gm/ m²
37Providing ridges or hips of width 60 cm overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete for 0.63 mm thick with zinc coating not less than 275 gm/m²
38Material and labour for Point wiring with PVC insulated sheathed single core cable 1100V grade confirming to IS 694 multi strand copper conductor along with 2mm thick PVC conduit accessories run on wall or roof including M.S. switch box concealed in the wall(made out of 3mm thick sheet) and laminated sun mica sheet 3mm thick cover for housing the switches, regulators and plug socket etc. mount on a wall/roof etc. including same size copper earth continuity wire. a)one light point or one fan point controlled by one switch with cables 1.5 sqmm size.
39Material and labour for Point wiring with PVC insulated sheathed single core cable 1100V grade confirming to IS 694 multi strand copper conductor along with 2mm thick PVC conduit accessories run on wall or roof including M.S. switch box concealed in the wall(made out of 3mm thick sheet) and laminated sun mica sheet 3mm thick cover for housing the switches, regulators and plug socket etc. mount on a wall/roof etc. including same size copper earth continuity wire. b)One 3 pin socket outlet 5 amps on the same board with other switches, with cables 1.5 sqmm size.
40Material and labour for Point wiring with PVC insulated sheathed single core cable 1100V grade confirming to IS 694 multi strand copper conductor along with 2mm thick PVC conduit accessories run on wall or roof including M.S. switch box concealed in the wall(made out of 3mm thick sheet) and laminated sun mica sheet 3mm thick cover for housing the switches, regulators and plug socket etc. mount on a wall/roof etc. including same size copper earth continuity wire. c)One 3 pin socket outlet 5 amps on independent with cables 2.5 sqmm size.
41Supply & Fixing of wiring for circuit/sub main wiring along with earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/recessed as required in PVC conduit a) 2x2.5 sqmm + 1x2.5 sqmm earth wire
42Supply & Fixing of wiring for circuit/sub main wiring along with earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/recessed as required in PVC conduit b) 2x4.0 sqmm + 1x4.0 sqmm earth wire
43Supply fixing and connecting to the system modular type switches 6A single pole one way (Make:,LEGRAND MYRIUS/ Litaski/ Crabtree or Suitably equivalent make)
44Supply, fixing and connecting to the system of socket, 6A-2/3 pin combined modular type 2 module (Make:,LEGRAND MYRIUS/ Litaski/ Crabtree or Suitably equivalent make)
45Supply & fixing of 6 module modular white cover plate with frame
46Supply & fixing of modular metal flush box for 6 module plate
47Supply and fixing of LED luminaire 600mmx600mm,40 watts, 220v AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete.
48Material and labour for painting Treating surfaces of steel and iron work, any description, width or girth, with ready mixed paint, dead black; each coat
49Writing letters or figures with thick paint ( Block, Roman,Italic,Indian) etc. not exceeding 30 cm high.
50Supply and fixing of exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers (Make: Almonard/ Khaitan/ Crompton or Suitably equivalent make)
51Supply and fixing of PVC/Polycarbonate, isolated ceiling rose 5A, 230V, AC , two to three terminals. Make: ANCHOR/HAVELLS /KUNDAN or Suitably equivalent make.
52Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete (Make: Havells/ Philips/ Wipro/ Bajaj/ CG/ Luker or Suitably equivalent make)
53Supply and Fixing of Flameproof cum Waterproof LED Bulk Head light fitting of 30W, IP66 protection of Cast Aluminum alloy material and Heat and Impact resistance toughen 'A' clear glass having Anti corrosive epoxy powder coated finish complete with all accessories pre wired and including connecting up with three core flexible copper conductor cable with suitable size.
54Supply and fixing of BLDC Indusrtrial wall mounting Air circulators with manufactures warranty including cable as per IS Standard,fitted with plug top Make:MDS /HAVELL'S/STANDARD /ANCHOR /ALMONARD / KHAITAN/CROMPTON ( GST is included) Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58269546
AUTHORITY Government Departments
TENDER VALUE 36.81 Lakhs
LAST DATE 26-11-2026
Authority
Authority Name Heavy Vehicles Factory
Work Description Tender for Repairs To Damaged Jri Shed In New Facility At Hvf, Avadi.
Basic Detail
Tender No HVF/TE/13025/CEO/2026-27/91
Bidding Type Tender
Location
City Thiruvallur
State Tamil Nadu
Key Dates
Publish Date 12 Nov 2026
Submission Date 26 Nov 2026
Open Date 27 Nov 2026
Finance
Tender Value 36.81 Lakhs
Tender Fee Ref. Documents
EMD 74000
Exemption Not Available
Document List
350fd7e6-01c2-478e-82e9-9a3a71f70f19.html
BOQ_344988.xls
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 12, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 26, 2026
18:00 IST

Corrigendum-1 Issued

Clarifications on tender conditions and amendments issued.

Upcoming · 5 days
Nov 26, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 5 days
Nov 27, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 6 days

Tender Documents

Download All (ZIP) ↓
html

350fd7e6-01c2-478e-82e9-9a3a71f70f19.html

xls

BOQ_344988.xls

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender