Tender For Aesthetic Renovation With Cnc And Illumination Work At Different Underpass And Flyovers At Haridwar
Tender Value
3.77 Crore
Estimated cost
Bid Submission
16 Nov 2026
6 days left
EMD
8.92 Lakhs
Bank guarantee accepted
Document Fee
5900
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Haridwar → Uttarakhand
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Aesthetic Renovation With Cnc And Illumination Work At Different Underpass And Flyovers At Haridwar
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 06-Nov-2026 | Date extension | Date | 16-Nov-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Supply, fabrication and installation of CNC-cut decorative MS sheet work, manufactured from minimum 3 mm thick mild steel (MS) sheet, accurately CNC/plasma/laser cut as per the approved design, pattern, drawing and dimensions provided by the Engineer-in-Charge. The work shall include preparation of shop drawings, cutting, profiling, edge finishing, grinding, straightening, necessary welding/jointing, drilling, fixing and fabrication of all required supporting frames, cleats, brackets, stiffeners, fasteners and other accessories as required for proper installation. The complete MS sheet work shall be properly cleaned, degreased and prepared, followed by application of suitable anti-corrosive primer and copper-oxidised decorative paint/finish of approved make and shade, including all necessary surface preparation, intermediate coats and finishing coats to achieve the desired approved appearance. The CNC-cut panels shall be securely fixed/anchored at the designated location as per approved drawings and instructions of the Engineer-in-Charge, ensuring proper alignment, level, rigidity, stability and uniformity of finish. The item shall include all materials, labour, tools, machinery, transportation, loading/unloading, scaffolding, lifting equipment, fabrication, erection, fixing, wastage including supporting background frame made of MS hollow structural section square of dimensions 25mmX25mmX3 mm as required and all incidental works necessary to complete the work in all respects. Complete as per approved design and drawing, specifications and directions of the Engineer-in-Charge. |
| 2 | Steel work in built up tubular (round, square or rectangular hollow tubesetc.) trusses etc., including cutting, hoisting, fixing in position and applyinga priming coat of approved steel primer, including welding and bolted withspecial shaped washers etc. complete. Hot finished welded type tubes DSR 2023 10.16.1 |
| 3 | Providing, supplying and installing FRP decorative structure/panel of approved design and drawing, manufactured using Fiberglass Reinforced Plastic (FRP) with suitable resin, glass fibre reinforcement and required thickness, including moulding, fabrication, cutting, finishing, sanding, application of primer and approved weather-resistant paint/gel coat, complete with necessary MS/GI supporting frame, brackets, fasteners, hardware, transportation, erection, fixing and all incidental works, as per design and directions of Engineer-in-Charge, complete in all respects. |
| 4 | Supply Instalation testing & commissioning of Homogeneous Dot free LED Flexible Linear Light Wattage 12W ( 5 mtr lengthwith high quality circuit design for stable and reliable performance, surface material should be made of Silicon with aluminium extrusion linear profile and other connecting accessories, Surface mounted flexible linear light suitable for facade edge lighting, Symmetric distribution. luminaire should have diffuse silicone based cover for soft illumination. Rated input supply of DC 24V constant voltage with external LED Driver, External ballast as accessory must be provided separately, Output color should be Warm White. The luminaire should have versatile optics : 120°, Mean rated service life L70(tq 25 °C) = 50,000 h. Luminaire body of aluminium extrusion with aluminium components. With flush-fitting cover, anti theft aluminium/ss casing for installation and integral LED unit. Colour of luminaire body Grey/Silver, highly weather resistant/ powder-coated. Ingress protection rating : IP68, impact resistance level should be suitable to site condition. The LED system with control gear unit is suitable for operation on direct voltage supply grids. The luminaire should be provided with Electrical safety class I. Power Efficiency : >85%, Operating Temperature : - 10°C to +55°C, Operating Humidity : 10%-90%, Housing to have customised base bracket for angle adjustment so that the light direction can be adjusted to illuminate desired structural elements. The bidder shall submit the following certifications/reports for approval: product data sheets, LM79 test reports from NABL accredited lab, illuminance diagram, polar curve & LM80 report issued by LED manufacturer & RoHS Compliance along with CE certificate., BIS Certification for Luminaires & Drivers. Including supply driver, with all inclusive on-site 5 years warranty ( repair/replacement within 3 days) and all complete work. Make: to be approved before installation from Engineer-in-charge. |
| 5 | Supply, installation, testing & commissioning of LIGHT FIXTURE - Linear Wall Washer 20-25W, LED, Warm White (2700-4000K) , IP 66, min 1 metre long. The housing in light weight, made of high strength aluminium and coated by static powder making it weather resistant. Lens -Clear UV-protected polycarbonate, screen in ultra white tempered glass with high impact resistance . High precision dial ensures precision angle adjustment with CRI>80 for the fixture IP66 rated.Fixture shall equipped with mechanical impact of minimum IK08, of min 1000mm length , Weight <4kgs. to be installed with metal cages. Power LED Module with high efficacy LED's, on Printed Circuit Board with metal core plate. Electronic Power Supply for LED Module,which offers Protection against Short Circuit, Over- Voltage & Over- Current, with in-built surge protection. Lens made of PC which should offer beam angle of 30X60°/ as per site requirement. Estimated LED Lifetime is L50,000 hours min Fixture shall have auto-ranging input voltage for 120 – 270 VAC..LM80 report from LED Manufacturer should be submitted. BIS certificate with Name of Manufacturer should be same as the brand proposed,test reports as per IS10322 from NABL accredited/Intertek/UL lab should be submitted. Sample Should be submitted for concerned engineer incharge for approval of light fixture.The bidder shall submit the following certifications/reports for approval: product data sheets, LM79-IP-IK-Vibration resistance test reports from NABL accredited lab, illuminance diagram, polar curve & LM80 report issued by LED manufacturer & RoHS Compliance along with CE certificate., BIS Certification for Luminaires & Drivers (Linear Wall washer 20-25W, WW) Including supply driver, with all inclusive on-site 5 years warranty ( repair/replacement within 3 days) and all complete work. Make: to be approved before installation from Engineer-in-charge. |
| 6 | Supply, installation, testing & commissioning of LIGHT FIXTURE -Spot Light 12-15 W, LED, Warm White (2700-4000K), IP 66. The housing in light weight, made of high strength die cast aluminium and coated by static powder making it weather Projector Light 12-15 W, (resistant.Protection screen in white tempered glass with high impact resistance. High precision dial ensures precision angle adjustment.Premium thermal management by high heat conductivity aluminum alloy and thermal fins. the fixture IP66/IK08 rated. to be installed with metal cages.( Power LED Module with high efficacy LED's,on Printed Circuit Board with metal core plate, Electronic Power Supply for LED Module,which offers Protection against Short Circuit, Over- Voltage & Over- Current, with in-built surge protection. Lens made of PC which should offer beam angle of 7-10°/ as per site requirement. Estimated LED Lifetime is L70-50,000 hours minimum.LM80 report from LED Manufacturer should be submitted. BIS certificate with Name of Manufacturer should be same as the brand proposed,test reports as per IS10322 from NABL accredited/Intertek/UL lab should be submitted. Sample Should be submitted for concerned engineer incharge for approval of light fixture.The bidder shall submit the following certifications/reports for approval: product data sheets, LM79-IP-IK-Vibration resistance test reports from NABL accredited lab, illuminance diagram, polar curve & LM80 report issued by LED manufacturer & RoHS Compliance along with CE certificate., BIS Certification for Luminaires & Drivers(Spot Light 12-15W) |
| 7 | Supply, installation, testing & commissioning of LIGHT FIXTURE - Spot Light 20-30 W, LED, Warm White (2700-4000K), IP 66. The housing in light weight, made of high strength die cast aluminium and coated by static powder making it weather Projector Light 20-30W, (resistant.Protection screen in white tempered glass with high impact resistance. High precision dial ensures precision angle adjustment.Premium thermal management by high heat conductivity aluminum alloy and thermal fins. the fixture IP66/ IK08 rated. to be installed with metal cages. ( Power LED Module with high efficacy LED's,on Printed Circuit Board with metal core plate.,Electronic Power Supply for LED Module,which offers Protection against Short Circuit, Over- Voltage & Over- Current, with in-built surge protection. Lens made of PC which should offer beam angle of 35-40°/ as per site requirement. Estimated LED Lifetime is L70-50,000 hours minimum.LM80 report from LED Manufacturer should be submitted. BIS certificate with Name of Manufacturer should be same as the brand proposed,test reports as per IS10322 from NABL accredited/Intertek/UL lab should be submitted. Sample Should be submitted for concerned engineer incharge for approval of light fixture. The bidder shall submit the following certifications/reports for approval: product data sheets, LM79-IP-IK-Vibration resistance test reports from NABL accredited lab, illuminance diagram, polar curve & LM80 report issued by LED manufacturer & RoHS Compliance along with CE certificate., BIS Certification for Luminaires & Drivers( Spot Light 20-25W, Warm White) Including supply driver, with all inclusive on-site 5 years warranty ( repair/replacement within 3 days) and all complete work. Make: to be approved before installation from Engineer-in-charge. |
| 8 | Supply, Installation, Testing and Commissioning of LED Warm White Floodlight Luminaire for Facade lighting with die cast aluminium housing, with powder coating of wattage 50-55W with suitable hood for asymmetric distribution. to be installed with metal cages. The beam angle of the fixture shall be 30 deg. The luminaire shall have high optical efficiency, anti aging and anti UV PMMA/PC lenses. Luminaire shall be complete with driver and capable of operating at line voltage without any separate power supply from 120 to 270 V AC, 50 Hz, power factor > 0.9. High power LED's shall be SMD type and fixture shall have system efficacy at System level (Not Chip Level) >=40 LPW, Life of fixture (Including Driver): 50K Hrs. @ L70 Lumen maintenance at 35 °C Ambient Temperature. CRI ≥ 70 at 3000K, PF >0.90 & THD<20%, minimum Internal Surge Protection 4KV, 20 kV external surge protector, must be having IP66 & IK 08 Impact rating & Approbation-CE along with IEC Classification Class I, RoHS. Fixture shall be suitable to operate at ambient temperature range of -10°C to +50°C. The bidder shall submit the following certifications/reports for approval: product data sheets, LM79-IP-IK-Vibration resistance test reports from NABL accredited lab, illuminance diagram, polar curve & LM80 report issued by LED manufacturer & RoHS Compliance along with CE certificate., BIS Certification for Luminaires & Drivers ( Projector Light 50-55W, Warm White) Including supply driver, with all inclusive on-site 5 years warranty ( repair/replacement within 3 days) and all complete work. Make: to be approved before installation from Engineer-in-charge. |
| 9 | Supply and laying of 4.0 sq. mm x 3 core ISI marked, FRLS PVC insulated, single core copper conductor cable in exising conduits with proper connections, glands, etc |
| 10 | Supply and Laying of one number 4 core x16 q mm Aluminium UnArmoured PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground or pipe or trench as required including excavation, sand cushioning, protective covering and refilling the trench etc as required. |
| 11 | Supply and fixing IP67 weatherproof box for Power Supply with cable glands at input and output of the box, size of the box should be sufficient to accommodate the power supply of the fixtures |
| 12 | Supply, installation, testing and commissioning of IP68 water proof connectors for power and data connections |
| 13 | Supply of factory fabricated and wired metal clad dust and vermin proof floor mounting panel TPN switch board complete. The instrument chamber shall be saprate and shall comprise of Multifunction meter and current transformer etc. The board shall have suitable cappcity electrolytic aluminium bus bars as per IS:8623 insulated with heat shrink sleeving and mounted on non hygroscopic supports such as CMC /DMC supports with detchable side covers and shall be suitable for extension on the sides .the switches shall be complete with suitable with cable and boxes ,revers entry boxes in case of pedestal type cable socket compression glands and indicating lamp on incoming etc. The job includes the grounting of the board as per direction of Engineer Incharge The switch board shall be fabricated with CRCA sheet with a minimum thickness of 1.6mm/2mm cubical type switch board shall be of Cat A, B & B = II only outdoor type with following incomming and outgoings INCOMMINGMCCB-100Amp TPN-01Multifunction meter-01RYB Indicators-01SetDigital control Servo Voltage Stabalizer of 40KVA oil type with voltage range from 260Volt to 480VoltOUTGOING63 Amp DP MCB- 08 No 15Amp Combined Socket-04NoSpace for company DMX Splitter and Boosters as per specifications |
| 14 | SITC of Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal coke and salt as required. DSR 2023 10.16.1 |
| 15 | Supply and laying of 63 mm outside dia. double wall corrugated pipes (DWC) of HDPE for enclosing cable below ground/road surface, to required depth complete. DSR E&M 2022 14.15.1 |
| 16 | Supply and fixing 25mm MS grey box conduit ISI marked FRLS along with the accessories in concealed system etc. as required. The colour to be matched with the bridge texture. |
| 17 | Providing Circular Cement Concrete pots of specified size, cast with cementconcrete of nominal mix 1:2:4 (1 cement: 2 coarse sand: 4 graded stoneaggregate 6 mm nominal size), reinforced with 7 Nos ( 3 nos horizontal &4 nos vertical “ U “ shape) M.S. wires of 3.5 mm dia as per design, includingrequired form work, finishing with cement punning on exposed surface,curing for specified period and stacking in required rows & height, allcomplete as per direction of Officer-in-charge.2.29.1 Top inside dia 35 cm, outer bottom dia 25 cm, total height35 cm with wall thickness of 25.4 mm |
| 18 | Supplying and stacking of good earth at site including royalty and carriageupto 5 km lead complete (earth measured in stacks will be reduced by20% for payment). |
| 19 | Transportation of Good Earth upto 10 kms By Mechanical Transport including loading ,unloading and stacking |
| 20 | Filling of the following size empty pots with mixture of good earth & manurein the ratio of 2:1 (Two part of Good earth & one port of manure) and placingthem on approprite place i/c carriage of earth, manure and pots up to 50mtr, as per direction of officer incharge. (The cost of good earth, earthenpots & manure will be paid seperately.) |
| 21 | Providing and displaying of Areca Palm having ht. 2.40 m to 2.70 m with 12to 14 suckers, well developed, fresh and healthy with lush green foliage in35 cm size of Bucket type cement pots & as per direction of theofficer-in-charge |
| 22 | Providing and displaying of Rhapis Excelsa Palm plant, having ht. 75 cm to 90 cm with 12 to 15 equal suckers, well developed, full of fresh & healthy leaves from bottom to top in 25 cm size Earthen pot/Plastic pot & as per direction of the officer-in-charge. |
| 23 | Providing and stacking of Plumeria alba dwarf dwarf of height 90-105 cm.with 3-4 branches and thick stem in big size HDPE bags as per directionof the officer-in-charge. |
| 24 | Providing and Displaying Bougainvillea named variety, Sobhra, Thima, Marrypalmar, Cherry Blossom etc. well developed with fresh & healthy bushy infull bloom 75 to 90 cm ht. in 40 cm Cement Pot as per direction of theofficer-in-charge. |
| 25 | Providing and fixing 25 mm X 5 mm G.I. strip on surface or inrecess for connections etc. as required DSR E&M 2022 5.15 |
| 26 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. DSR 13.91 |
| 27 | Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface :Water thinnable cement primer DSR 13.85 |
| 28 | Base Preparation for artwork : Preparation & Finishing walls with Premium Acrylic Smooth exterior paint (Two or more coats ) with Silicone additives of required shade . Priming coat of premium exterior primer of reputed manufacturerof with high color fastness rating to withstand outdoor conditions is required to cover existing dark or bold color on the wall or to reseal an unpainted porous surface including ladders / scaffolding etc. complete as per directions of Engineer in charge.Upto a height of 3 metre MR |
| 29 | Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applie @ 2.20 kg/10 sqm) DSR 13.46.1 Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 06, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Nov 16, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 6 daysNov 16, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysNov 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender