Tender For Quatation For Non Ssr Furniture Items Required For New Administrative Building ( G+5) Near Garden Gate, Mantralay, Mumbai .
Tender Value
Ref. Documents
Estimated cost
Bid Submission
05 Nov 2026
2 days left
EMD
Ref. Documents
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Mumbai → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Quatation For Non Ssr Furniture Items Required For New Administrative Building ( G+5) Near Garden Gate, Mantralay, Mumbai .
BOQ
| Sl. No. | Item Description |
| 1 | Executive Main Desk Table: Providing and installing Main Desk with Apron, Side Runner, Pedestal, Flip-Up and Profile Battens/Modesty PanelTHE MAIN DESK WITH APRON – 3000×1200×750- Main Table: 3000mm (L) × 1200mm (D) × 750mm (H), manufactured as per approved design and finish.- Table-top: Manufactured from BWR plywood with decorative laminate finish on exposed surfaces and laminate on concealed/unexposed surfaces. All edges shall be properly sealed with PVC edge banding, applied using a through-feed edge bander with EVA glue to ensure a smooth, durable finish.- Table-base: Supported on an integrated framework as per approved design, with apron/modesty panel incorporating the specified profile battens/detailing to achieve the required appearance.- Side Runner: 1950mm (L) × 600mm (D) × 660mm (H), matching the main desk in material, finish and detailing, as per approved design.- Pedestal: 450mm (W) × 900mm (D) × 660mm (H), provided with three drawers, constructed from 18mm thick panels with soft-close telescopic slides, designer handles and a centralized locking system.- Flip-Up: Flip-up unit/accessory as per approved design and vendor-approved configuration.- Profile Battens / Modesty Panel: Modesty panel/apron with profile battens/detailing as per approved design, matching the main desk finish. |
| 2 | Back Unit 3000(L) x 450mm(W) x 660mm (H) crafted fromBWR Plywood with decorative laminate finish. The unit shall comprise low height storage cabinets with hinged shutters, push to open mechanism, suitable internal storage provisions and locking mechanisms, complete with all necessery hardware & accessories. |
| 3 | EXECUTIVE SUITE – MAIN DESK WITH SIDE RUNNER – 1500×750×750H – BWR CALIBRATED PLY- Main Desk: 1500mm (L) × 750mm (D) × 750mm (H), crafted from BWR plywood with decorative laminate in accordance with IS 2046:1995 (Reaffirmed 2005), using 1mm thick laminate on exposed surfaces and 0.8mm thick laminate on unexposed surfaces. All edges are sealed with PVC edge banding, applied using a through-feed edge bander with EVA glue to ensure a smooth, durable finish.- Table with Board Side & Apron: Main table shall be provided with board side and apron as per approved design, overall size 1500mm (L) × 750mm (D) × 750mm (H).- Side Runner / Return Unit: 900mm (L) × 450mm (D) × 750mm (H), crafted from 18mm thick panels and comprising hinged-door compartments and a three-drawer storage unit, matching the main desk in material, laminate finish and detailing.- Flip-Up: Provision of flip-up arrangement as per approved design.- Vertébre / Spine: Provision of vertébre/spine for organized routing, concealment and management of electrical/data cables.- Metal Raceway Box Below Table: Provide and install metal raceway box below the table for organized routing and concealment of electrical/data cables.- Box for Raceway for Additional Switches: Provide and install suitable box/provision connected to the raceway for accommodating additional electrical switches, as per approved design. |
| 4 | MAIN DESK WITH RETURN UNIT – 1200×750×750H – BWR CALIBRATED PLY- Main Desk: 1200mm (L) × 750mm (D) × 750mm (H), crafted from BWR Calibrated plywood with decorative laminate in accordance with IS 2046:1995 (Reaffirmed 2005), using 1mm thick laminate on exposed surfaces and 0.8mm thick laminate on unexposed surfaces. All edges shall be sealed with PVC edge banding, applied using a through-feed edge bander with EVA glue to ensure a smooth, durable finish.- Table with Board Side & Apron: Main table shall be provided with board side and apron, overall size 1200mm (L) × 750mm (D) × 750mm (H), as per approved design.- Return Unit / Side Runner: 900mm (L) × 450mm (D) × 750mm (H), crafted from 18mm thick panels and comprising hinged-door compartments and a three-drawer storage unit, matching the main desk in material, laminate finish and detailing.- Flip-Up / Access Flap: Provision of access flap on the table top for convenient access to electrical/data connections.- Vertébre / Spine: Flexible vertébre/spine cable manager for organized routing, concealment and management of electrical/data cables.- Metal Raceway Box Below Table: Integrated metal raceway box below the table for organized routing and concealment of electrical/data cables.- Box for Raceway for Additional Switches: Provision of a box connected to the raceway for accommodating additional electrical switches, as per approved design. |
| 5 | EXECUTIVE SUITE – MAIN DESK WITH RETURN UNIT – 2000×750×750H – BWR CALIBRATED PLY- Main Desk: 2000mm (L) × 750mm (D) × 750mm (H), crafted from BWR plywood with decorative laminate in accordance with IS 2046:1995 (Reaffirmed 2005), using 1mm thick laminate on exposed surfaces and 0.8mm thick laminate on unexposed surfaces. All edges shall be sealed with PVC edge banding, applied using a through-feed edge bander with EVA glue to ensure a smooth, durable finish.- Table with Board Side & Apron: Main table shall be provided with board side and apron, overall size 2000mm (L) × 750mm (D) × 750mm (H), as per approved design.- Return Unit / Side Runner: 1200mm (L) × 450mm (D) × 750mm (H), crafted from 18mm thick panels and comprising two hinged-door compartments and a three-drawer storage unit, matching the main desk in material, laminate finish and detailing.- Flip-Up / Access Flap: Provision of access flap on table top for convenient access to electrical/data connections.- Vertébre / Spine: Provision of flexible vertébre/spine cable manager for organized routing, concealment and management of electrical/data cables.- Metal Raceway Box Below Table: Provision of metal raceway box below the table for organized routing and concealment of electrical/data cables.- Box for Raceway for Additional Switches: Provision of a box for the raceway to accommodate additional electrical switches, as per approved design. |
| 6 | WORK DESK – 1200×600×750H – POSTLAM BWR PLY- Main Work Desk: 1200mm (L) × 600mm (D) × 750mm (H), crafted from BWR Calibrated plywood with decorative laminate in accordance with IS 2046:1995 (Reaffirmed 2005), using 1mm thick laminate on exposed surfaces and 0.8mm thick laminate on unexposed surfaces. All edges shall be sealed with PVC edge banding, applied using a through-feed edge bander with EVA glue to ensure a smooth, durable finish.- Table with Metal Leg & Apron: Table shall be provided with metal legs and apron of required height, overall table size 1200mm (L) × 600mm (D) × 750mm (H), as per approved design.- Raceway Below Table: Provision of raceway below the table for organized routing and concealment of electrical/data cables.- Flip-Up: Provision of flip-up arrangement/access flap on the table top for electrical/data connectivity.- Vertébre / Spine: Provision of flexible vertébre/spine cable manager for organized routing, concealment and management of electrical/data cables. |
| 7 | STAFF WORKSTATION – SHARING / NON-SHARING TYPELINEAR WORKSTATION WITH RETURN PARTITION – MAIN UNIT – 1200×600×1200H – BWR Calibrated PLY- Workstation Top: 25mm thick BWR plywood with decorative laminate in accordance with IS 2046:1995 (Reaffirmed 2005), using 1mm thick laminate on exposed surfaces and 0.8mm thick laminate on unexposed surfaces.- Board Side / Gable End: 18mm thick board side/gable end, finished with matching laminate as per approved design.- Partition: Providing and fixing 64mm thick half-height partition system, 1200mm high, forming the main spine and return spine of the workstation. The partition system shall be modular and fabricated from aluminium extruded sections conforming to AISI 6063-T6 standards, with upright and joinery posts having a wall thickness of 1.6mm and trims, horizontals, glass frames and dividers with a minimum wall thickness of 1.2mm. The framework shall be straight, plumb and mechanically rigid through horizontal and vertical interconnections.- Soft Board: Providing and fixing soft board panels on the partition with suitable fabric finish.- Modesty Panel: Providing and fixing laminated wooden modesty panels below the workstation tops.- Cable Management: Providing cable access holes for each workstation top for convenient routing of electrical/data cables.- Post: Provision of suitable posts/supports as required for the complete workstation partition system. |
| 8 | STORAGE UNIT UNIT-HINGED DOOR-1200X400X1200H--POSTLAM BWR ply- Dimension : 1200mm (W) x 400mm (D) x 1200mm (H)- Core Material : 25mm / 18mm / 8mm thick BWR ply with 1mm thk laminate finish |
| 9 | CONFERENCE AREA – RECTANGLEMODULAR CONFERENCE TABLE – MAIN CONFERENCE TABLE – 5300X1500X760H – BWR Calibrated PLY- Dimension: 5300mm (L) x 1500mm (D) x 760mm (H).- Core Material: Crafted from BWR plywood with decorative laminate in accordance with IS 2046:1995 (Reaffirmed 2005), using 1mm thick laminate on exposed surfaces and 0.8mm thick laminate on unexposed surfaces. All edges shall be sealed with PVC edge banding to ensure a smooth and durable finish.- Table Structure: Providing a rigid and stable supporting structure with laminated end panels/supports and 12mm black anodized aluminium profile detailing.- Electrical Provision: Providing and fixing concealed tabletop electrical boxes with flaps for convenient access to electrical/data connections. |
| 10 | CONFERENCE AREA – RECTANGLEMODULAR CONFERENCE TABLE – MAIN CONFERENCE TABLE – 6000X1800X760H – BWR Calibrated PLY- Dimension: 6000mm (L) x 1800mm (D) x 760mm (H).- Core Material: Crafted from BWR plywood with decorative laminate in accordance with IS 2046:1995 (Reaffirmed 2005), using 1mm thick laminate on exposed surfaces and 0.8mm thick laminate on unexposed surfaces. All edges shall be sealed with PVC edge banding to ensure a smooth and durable finish.- Table Structure: Providing a rigid and stable supporting structure with laminated end panels/supports and 12mm black anodized aluminium profile detailing.- Electrical Provision: Providing and fixing concealed tabletop electrical boxes with flaps for convenient access to electrical/data connections. |
| 11 | CONFERENCE AREA-ROUND Providing and installing the Modular Conference Table DIA 2300X750The conference table shall be fabricated from 25mm thick high-quality BWR ply with decorative laminate in accordance with IS 2046:1995 (Reaffirmed 2005), using 1mm thick laminate on exposed surfaces and 0.8mm thick laminate on unexposed surfaces The table shall be provided with a 500mm height modesty panel fabricated from 18mm thick panels, neatly finished with matching PVC edge banding to enhance privacy and aesthetics. The table shall be supported on 25mm thick gable end panels designed to provide structural stability and rigidity. The gable end panels shall be fitted with height-adjustable M6 levelling screws to compensate for uneven floor surfaces and ensure proper alignment and stability. A full-length wire management tray fabricated from 0.8mm thick Cold Rolled Close Annealed (CRCA) steel sheet shall be provided beneath the tabletop for systematic routing and organization of electrical, data, and communication cables. Flexible wire risers (vertebrae-type cable managers) shall be provided to facilitate concealed cable movement from floor level to the wire management tray in an organized manner. The tabletop shall additionally be provided with a 6-module desk port suitable for accommodating electrical, data, and voice fittings for user convenience and efficient connectivity. The conference table shall be modular in construction, enabling flexible configurations and seamless integration of multiple units to create |
| 12 | STAFF WORKSTATION – NON-SHARING TYPE-3 – LINEAR WORKSTATION WITH MAIN & RETURN SPINES – POSTLAM BWR PLY- Overall Workstation: Linear workstation system comprising workstation tops, metal legs, main spine, return spine and posts, with the overall configuration arranged as per the respective workstation cluster layout.- Workstation Top: 25mm thick BWR plywood with decorative laminate in accordance with IS 2046:1995 (Reaffirmed 2005), using 1mm thick laminate on exposed surfaces and 0.8mm thick laminate on unexposed surfaces. Workstation tops shall be supported on suitable metal legs and framing as per approved design.- Main Spine: Providing and fixing 64mm thick half-height partition system, 1200mm high, forming the main spine. The partition system shall be modular and fabricated from aluminium extruded sections conforming to AISI 6063-T6 standards, with upright and joinery posts having a wall thickness of 1.6mm, and trims, horizontals, glass frames and dividers with a minimum wall thickness of 1.2mm. The framework shall be straight, plumb and mechanically rigid through horizontal and vertical interconnections.- Return Spine: Providing and fixing 64mm thick half-height partition system, 1200mm high, forming the return spine, complete with necessary posts, trims and interconnections as per the approved cluster configuration.- Metal Legs: Providing and fixing suitable metal legs to support the workstation tops, complete with required framing and fixing arrangements.- Soft Board: Providing and fixing soft board panels on the partition with suitable fabric finish.- Modesty Panel: Providing and fixing laminated wooden modesty panels below the workstation tops.- Cable Management: Providing cable access holes for each workstation top for convenient routing of electrical/data cables.- Posts and Accessories: Providing necessary posts, trims, connectors, joinery and accessories required for the complete workstation system. |
| 13 | LINEAR WORKSTATION SHARING -MAIN UNIT-3400X600X1200H-POSTLAM BWR ply- Dimension : 3400mm (L) x 600mm (D) x 750mm (H)- Workstation-Top : 25mm thick BWR ply with decorative laminate in accordance with IS 2046:1995 (Reaffirmed 2005), using 1mm thick laminate on exposed surfaces and 0.8mm thick laminate on unexposed surfaces suported on metal leg 40x40 -O type with approved powder coating finish WITH- Half height partition-The partition system is modular, 64mm thick, and 1200mm height. The frame is made of aluminium extruded sections conforming to AISI 6063-T6 standards, with upright and joinery posts having a wall thickness of 1.6mm, and trims, horizontals, glass frames, and dividers with a minimum wall thickness of 1.2mm.- Soft Board: Providing and fixing soft board panels on the partition, with suitable fabric finish.- Modesty Panel: Providing and fixing laminated wooden modesty panels below the workstation tops.- Providing a cable access hole for each workstation top for convenient routing of electrical/data cables. |
| 14 | Providing and installing the Mini Conference TableMINI-CONFERENCE TABLE-8SEATER-POSTLAM BWR ply- Dimension : 2400mm (L) x 1200mm (D) x 750mm (H)- Core material : Crafted from BWR ply with decorative laminate in accordance with IS 2046:1995 (Reaffirmed 2005), using 1mm thick laminate on exposed surfaces and 0.8mm thick laminate on unexposed surfaces All edges are sealed with PVC edge banding.- Electrical Box: Providing and fixing a concealed tabletop electrical box with flap, complete with provisions for electrical and data connections. |
| 15 | Providing and installing the Pedestal Drawer Unit with three DrawerPEDESTAL DRAWER UNIT-THREE DRAWER-400X450X616H-POSTLAM BWR Calibrated ply- Core Material : 18mm / 8mm thick BWR Calibrated ply with 1mm thk laminate finish |
| 16 | CREDENZA UNIT-HINGED DOOR-1200X600X750H--POSTLAM BWR Calibrated ply- Dimension : 1200mm (W) x 600mm (D) x 750mm (H)- Core Material : 25mm / 18mm / 8mm thick BWR Calibrated ply with 1mm thk laminate finish Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 29, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysNov 06, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender