Tender For Amrut-2025-26 Kodungallur Municipality- Amrut2 - Vk Rajan Municipal Park -Ward 17-Electrification (Renovation)-General Electrical Work
Tender Value
7.54 Lakhs
Estimated cost
Bid Submission
04 Nov 2026
0 days left
EMD
18861
Bank guarantee accepted
Document Fee
1665
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
thrissur → Kerala
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Amrut-2025-26 Kodungallur Municipality- Amrut2 - Vk Rajan Municipal Park -Ward 17-Electrification (Renovation)-General Electrical Work
BOQ
| Sl. No. | Item Description |
| 1 | Electrical work |
| 2 | OD140289/2026-2027:Supply fabrication , Conveyance ,delivery and errection of 2.5mt 40mm GI Tubular pole with base plate and foudation bolt for fixing in the existing RCC foudation and mounting bracket/clamps of 2nos for fixing existing side grill at bottom and including connector including painting with epoxy primer and 2coats of synthetic enamel silver colour paint etc as required i |
| 3 | OD164187/2026-2027:Supply and providing 2mm GI pole top Light box( 20cm hieght , 14cm width ) with batten holder (including powder coating )including 12W LED bulb (water resistant). Fabrication and Laser cutting and fixing on existing errected poles in the garden. |
| 4 | OD140280/2026-2027:Supplying and Fixing 4module moulded plastic sintex box in the existing wall rigidly and connecting cable /wires suitably |
| 5 | OD164437/2026-2027: Supply on fabricatio and coveyance ,errecting on Ground of Name Board displaying Municipal park in Malayalam (8 letters )@Rs. 1400/letter, at entry shelter ( situated in turning from main road then to Park) as 2mm 0.40Acrylic LED box 12" in MS hollow rect . frame using 4mm ACP board 120x24 , Aluminium channel border 1 inch , epoxy painting on frame and back side ,board hanging ms chain with fixing as required. |
| 6 | OD143395/2026-2027: Supply on fabricatio and coveyance ,errecting on Ground of Name Board displaying Municipal park in Malayalam (8 letters @Rs. 1400/letter) at river side border middle of Park as 2mm 0.40Acrylic LED box 12" ,Front tech 1000W SMPS Power Supply in MS hollow rect . frame of 101.600x 101.600x 1.2 mm using 4mm ACP board 120x24 , Aluminium channel border 1 inch , epoxy painting on frame and back side , Min. 2.2m from ground level using 2 inch GI pipes in concrete fixings including all overhead charges etc. as required. |
| 7 | OD166180/2026-2027:Maintain a Existing Steel letter Sign/ Name Board errected at Front gate entry shelter : Removing ,Lowering down Cleaning Steel letters and Re fixing-charges of Scaffolding with labour Charges etc. as Required. |
| 8 | OD164157/2026-2027:Supply, Conveyance, Installing SS SHOW LIGHT STRUCTURE stainless steel fabrication without electrical work along with 16gauge GI butterfly model in top branches . Base measurement : 85x 85 cm, Pillre height : 210 cm , pipe length approx. 28mt. as required Approx . weight . 200kg |
| 9 | 90.14.5:Supply and fabrication conveyance and installation of angle iron frame work for wall mounting panel board |
| 10 | 90.2.1.1:Supply and wiring points according to IS 732-1989 using rigid PVC conduit of minimum size 20 mm with specials conforming to IS 9537 part III 1983 and with suitable size specials conforming to IS 3419-1988, fixing the conduit using metal saddles spacing not exceeding 50 cm or concealed suitably and with 1.00 sq mm FRLS PVC insulated stranded single core copper conductor cable 650V grade, including providing switch board main and continuous earthing with No.14 SWG bare copper,required quantity of copper earth socket, brass bolt and nut crimping/ soldering etc complete with suitable size modular type metal switch boxes, modular type front plates (white) etc. up to and including 6A modular type SP switches and making good the surface of wall, colour washing etc. complete. All the terminations in the switch boards and DB's shall be tinned and the wires shall be drawn and fixed along the periphery of the box using suitable ties, tie mounts etc as required. (RoHS compliant modular accessories).Single Control light point with 6A, plate ceiling rose - Short point |
| 11 | 90.2.1.3:Supply and wiring points according to IS 732-1989 using rigid PVC conduit of minimum size 20 mm with specials conforming to IS 9537 part III 1983 and with suitable size specials conforming to IS 3419-1988, fixing the conduit using metal saddles spacing not exceeding 50 cm or concealed suitably and with 1.00 sq mm FRLS PVC insulated stranded single core copper conductor cable 650V grade, including providing switch board main and continuous earthing with No.14 SWG bare copper,required quantity of copper earth socket, brass bolt and nut crimping/ soldering etc complete with suitable size modular type metal switch boxes, modular type front plates (white) etc. up to and including 6A modular type SP switches and making good the surface of wall, colour washing etc. complete. All the terminations in the switch boards and DB's shall be tinned and the wires shall be drawn and fixed along the periphery of the box using suitable ties, tie mounts etc as required. (RoHS compliant modular accessories).Single control light point without ceiling rose - Short point |
| 12 | 90.2.1.4:Supply and wiring points according to IS 732-1989 using rigid PVC conduit of minimum size 20 mm with specials conforming to IS 9537 part III 1983 and with suitable size specials conforming to IS 3419-1988, fixing the conduit using metal saddles spacing not exceeding 50 cm or concealed suitably and with 1.00 sq mm FRLS PVC insulated stranded single core copper conductor cable 650V grade, including providing switch board main and continuous earthing with No.14 SWG bare copper,required quantity of copper earth socket, brass bolt and nut crimping/ soldering etc complete with suitable size modular type metal switch boxes, modular type front plates (white) etc. up to and including 6A modular type SP switches and making good the surface of wall, colour washing etc. complete. All the terminations in the switch boards and DB's shall be tinned and the wires shall be drawn and fixed along the periphery of the box using suitable ties, tie mounts etc as required. (RoHS compliant modular accessories).Single control ceiling fan point with 6 A, 3 plate ceiling rose & with socket size stepped electronic regulator. - Short point |
| 13 | 90.2.1.6:Supply and wiring points according to IS 732-1989 using rigid PVC conduit of minimum size 20 mm with specials conforming to IS 9537 part III 1983 and with suitable size specials conforming to IS 3419-1988, fixing the conduit using metal saddles spacing not exceeding 50 cm or concealed suitably and with 1.00 sq mm FRLS PVC insulated stranded single core copper conductor cable 650V grade, including providing switch board main and continuous earthing with No.14 SWG bare copper,required quantity of copper earth socket, brass bolt and nut crimping/ soldering etc complete with suitable size modular type metal switch boxes, modular type front plates (white) etc. up to and including 6A modular type SP switches and making good the surface of wall, colour washing etc. complete. All the terminations in the switch boards and DB's shall be tinned and the wires shall be drawn and fixed along the periphery of the box using suitable ties, tie mounts etc as required. (RoHS compliant modular accessories).Combined plug point with 6 A, 5 pin plug socket controlled by 6 A, switch in the same switch board as that of light points |
| 14 | 90.2.1.7:Supply and wiring points according to IS 732-1989 using rigid PVC conduit of minimum size 20 mm with specials conforming to IS 9537 part III 1983 and with suitable size specials conforming to IS 3419-1988, fixing the conduit using metal saddles spacing not exceeding 50 cm or concealed suitably and with 1.00 sq mm FRLS PVC insulated stranded single core copper conductor cable 650V grade, including providing switch board main and continuous earthing with No.14 SWG bare copper,required quantity of copper earth socket, brass bolt and nut crimping/ soldering etc complete with suitable size modular type metal switch boxes, modular type front plates (white) etc. up to and including 6A modular type SP switches and making good the surface of wall, colour washing etc. complete. All the terminations in the switch boards and DB's shall be tinned and the wires shall be drawn and fixed along the periphery of the box using suitable ties, tie mounts etc as required. (RoHS compliant modular accessories).Independent plug - Short point |
| 15 | OD140288/2026-2027:Supply Testing and providing the following types and power rated lamps in the existing fittings as required. Normal size 12 W LED lamp code LBPCD12B22, COLOUR WH , |
| 16 | 90.3.21.3:Supply & installation of light fittings on 'C/U' shaped flat iron bracket Supply, conveyance, installation, testing and commissioning the light fittings of following types made from 0.5mm CRCA sheet complete with all accessories and lamps etc. directly on wall using 2 nos. 'C/U' brackets made from 20 x 3 mm MS flat, painting the flat iron bracket and giving connections with required length of 16/0.20mm 3 core copper conductor flex wire conforming to relevant ISS or extending the original wiring and giving connection etc. as required.1200 mm 1X20W LED Lamp with box type fixture |
| 17 | 90.3.21.4:Supply & installation of light fittings on 'C/U' shaped flat iron bracket Supply, conveyance, installation, testing and commissioning the light fittings of following types made from 0.5mm CRCA sheet complete with all accessories and lamps etc. directly on wall using 2 nos. 'C/U' brackets made from 20 x 3 mm MS flat, painting the flat iron bracket and giving connections with required length of 16/0.20mm 3 core copper conductor flex wire conforming to relevant ISS or extending the original wiring and giving connection etc. as required.1200 mm 2x20W LED Lamp with box type fixture |
| 18 | OD166325/2026-2027:Supply and providing 1200mm efficiencia DX BLDC Ceiling fan , 5star rated double ball bearing (w/o remote) preferred Havells or equivaient reputed make. |
| 19 | 90.4.8:Charges for cutting holes suitable for accommodating exhaust fans up to 305mm sweep including plastering colour washing etc. as required. |
| 20 | OD166324/2026-2027:Supply , installation of 250 mm sweep light duty exhaust fan in plastic body with self opening lowers working on 230 V single phase AC in the existing opening, fixing necessary anchor bolts/ bolt and nuts etc. as required including giving connections with the supplied wire along with the exhaust fan. |
| 21 | 90.6.10.1:Supply and fixing of following sizes of light gauge PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required20 mm |
| 22 | 90.6.10.2:Supply and fixing of following sizes of light gauge PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required25 mm |
| 23 | 90.16.1.1:Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required2.00 mm copper conductor ( 14 SWG) |
| 24 | 90.16.1.2:Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required2.65 mm copper conductor (12 SWG) |
| 25 | 90.16.2.1:Supply and laying of the following sizes of B class GI pipe laid 0.6 m below ground level including excavating trench of suitable size and refilling etc, as required.15.mm dia. G.I pipe ( medium class) |
| 26 | 90.16.1.3:Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required3.15 mm copper conductor ( 10 SWG) |
| 27 | 90.16.5.1:Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.2.00 mm (14 SWG) |
| 28 | 90.16.5.2:Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.2.65 mm (12 SWG) |
| 29 | 90.16.5.3:Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.3.15 mm (10 SWG) |
| 30 | 5.4:Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. |
| 31 | 5.9:Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required.(Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm) |
| 32 | 6.12:Providing and fixing testing joint, made of 20 mm X 3 mm thick G.I. strip, 125 mm long, with 4 nos. of G.I. bolts, nuts, chuck nuts and spring washers etc. complete as required. |
| 33 | OD140283/2026-2027:Supply and laying bare earthing conductors of 3.15 mm copper conductor (10 SWG) laid 0.6 mtr below ground level including excavating trench of suitable size and refilling etc. as required ( in ordinary soil). |
| 34 | OD140277/2026-2027:Supply and providing the following sizes of bolt and nut with washers on the existing M.S box/ earth bus etc. as required including drilling necessary holes as required. 12x3mm brass nut and bolt . |
| 35 | OD140279/2026-2027:Supply and providing the following sizes of bolt and nut with washers on the existing M.S box/ earth bus etc. as required including drilling necessary holes as required. 25x6mm brass nut and bolt . |
| 36 | 90.11.1.15:Supply and installation of sheet steel, phosphatised and painted, dust and vermin proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus and DIN rail suitable for fixing MCB/ isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall , making good the damages, colour washing etc. as required6 way (8+18) - double cover TPN vertical DB with provision for fixing 4P MCB / Isolator/ RCCB/ RCBO as incomer and SP/ TP MCB as outgoing (IP 42/43) |
| 37 | 2.3.3:Supplying and fixing following way, single pole and neutral, sheet steel, MCBdistribution board, 240 volts, on surface/ recess, complete with tinned copperbus bar, neutral bus bar, earth bar, din bar, interconnections, powder paintedincluding earthing etc. as required. (But without MCB/RCCB/Isolator)12 way, Double door |
| 38 | 2.3.4:Supplying and fixing following way, single pole and neutral, sheet steel, MCBdistribution board, 240 volts, on surface/ recess, complete with tinned copperbus bar, neutral bus bar, earth bar, din bar, interconnections, powder paintedincluding earthing etc. as required. (But without MCB/RCCB/Isolator)16 way, Double door |
| 39 | OD166319/2026-2027:Supply and installation of dust and vermin proof wall mounting SMC Junction box suitable for fixing MCB Distribution Board and terminal block box etc. hinged door construction for the front side, ,knock out out for cable entry and exit.as Open DB , GS-JB 5728 (inside 5700x280x215 ) Sintex or Equivalent. |
| 40 | OD140286/2026-2027:Supply and providing 2 pole moulded / plastic MCB enclosure for independant mounting of terminal block including cable entry and out as required. |
| 41 | 2.10.1:Supplying and fixing 5A to 32 A rating, 240/415 volts, 10 kA, \\"\\"C\\"\\" curve, miniaturecircuit breaker suitable for inductive load of following poles in the existing MCBDB complete with connections, testing and commissioning etc. as required.Single pole |
| 42 | 2.12.1:Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps |
| 43 | 2.13.2:Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.63 amps |
| 44 | 2.14.1:Supplying and fixing following rating, double pole, (single phase and neutral),240 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 milli amperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.25 amps |
| 45 | 2.14.2:Supplying and fixing following rating, double pole, (single phase and neutral),240 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 milli amperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps |
| 46 | 2.15.3:Supplying and fixing following rating, four pole, (three phase and neutral), 415volts, residual current circuit breaker (RCCB), having a sensitivity current 30milli Amperes in the existing MCB DB complete with connections, testing andcommissioning etc. as required.63 amps |
| 47 | OD140278/2026-2027:Supply and providing 9L capacityGI fire bucket in post office RED with primer coat of red oxide and written with white paint FIRE mounted on MS angle frame work /wall bracket filled with fine sand painted the bracket/ floor stand including making good the damages colour washing etc. as required as per IS2546. |
| 48 | OD167579/2026-2027:Supply and installation of ABC Powder Type (Stored Pressure) Fire Extinguisher 4Kg. Capacity ISI Mark IS: 15683 consisting of M.S cylindrical body, squeeze leve,r discharge valve fitted with pressure indicating gauge, 30cm long, high pressure discharge hose, nozzle etc. with MAP Powder for 'A','B' & 'C' class fire, fixing on wall with wallhook etc as required. |
| 49 | OD140285/2026-2027:Supply and fixing the following accessories in the existing meter board and giving connections etc.(32 A, 415 V 2 way neutral Link mounted on DMC/SMC base) |
| 50 | OD140275/2026-2027:Supply and fixing the following accessories in the existing meter board and giving connections etc.(63 A, HRC Fuse Base with HRC Fuse link) |
| 51 | 1.17.11:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.2 x 2.5 sq. mm |
| 52 | 1.17.20:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.2 x 4 sq. mm |
| 53 | 1.24.3:Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.15/16 amp switch |
| 54 | 1.24.5:Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.6 pin 15/16 amp socket outlet |
| 55 | 90.10.3.15:Supply and Fixing the following modular switches & accessories in the existing front plates and giving necessary connections as required (RoHS compliant )32A DP switch with indicator |
| 56 | 1.27.2:Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.3 Module (100mmX75mm) |
| 57 | 90.12.9.3:Supplying, laying and jointing of the following sizes of double wall corrugated (DWC) pipes made out of HDPE conforming to IS 14930 Part II for mechanical protection to underground power cables with all required accessories in ground in the existing trench63/50 mm or nearest size |
| 58 | 90.12.24.1:Supply of superior quality copper tubular cable socket and making core termination of cables of the following sizes including crimping etc. as required.2.5 sq mm |
| 59 | 90.12.24.2:Supply of superior quality copper tubular cable socket and making core termination of cables of the following sizes including crimping etc. as required.4 sq mm |
| 60 | 90.12.5.1:Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of 1.1KV grade of the following sizes in the existing RCC/ HUME / STONE WARE/ GI/ DWC pipe as required.2 core 4 sq mm |
| 61 | OD140307/2026-2027:Supply and providing by Laying of 1no. PVC insulated and PVC Sheathed armoured copper power cable 1.1KV grade of the following size keeping adjazent to the border wall and to the individuel devices in safe distance,making good the damages , colour washing etc. as required. 2 core 2.5sq mm. |
| 62 | 90.6.5.11:Supply and drawing the following sizes of multi-core PVC insulated & FRLS PVC sheathed 650/1100 V grade copper conductor round flexible cables conforming to IS 694 part I 1960 in the existing surface / recess conduit as required including giving necessary connections of the following sizes.3 core 1.50 sq mm |
| 63 | OD145178/2026-2027:Supply, Conveyance, Installing testing and commissioning CAPO RUNNING STRIP OUTDOOR - IP65 8W, 24V LSO68 RN or equivalent brand of suitable colour 30Mtr in Length along OFFICE BUILDING SUNSHADE of the PARK |
| 64 | OD145179/2026-2027:Supply, Conveyance, Installing testing and commissioning NEON Flexible STRIP OUTDOOR - IP65 8W, 220V LSO2835 or equivalent brand of suitable colours 50Mtr in Length along Open Truss Roof at entry of the PARK |
| 65 | OD145237/2026-2027:Supply, Conveyance, Connecting testing and commissioning OUTDOOR ROPE Strips DRIVE KIT LSO68 CTL LSO68 RN or equivalent brand |
| 66 | OD145342/2026-2027:Supply, Conveyance, Providing testing and commissioning 3W SPIKE LIGHTS LSSPK03TR SPK or equivalent brand suitably inas required. |
| 67 | OD166182/2026-2027:Supply and installation of LED Flood light GREENwith a system wattage of 50W,and a min. luminous flux of 6000lumens , ensuring a luminaire efficacy of at least 120lm/W. The fitting shall be constructed , from pressure die-cast aluminium finishe providing both structural strenngh and optimal heat dissipation. it must feature a polycarbonate module lens,secured with a silicon gasketfor efficient ingress protection, and shall confirm to atleast IP66 and IK08 standards for dust, water and impact resistance. The product use aLED driver with a pf < 0.95 and THD below 10%. The fitting has surge protection up to 4KV and be compatible with 140 to 280V AC at 50Hz. CRI > 70, provide an operating temperature range from -10degree centigrade to 45degree centigrade and have a rated life of 50,000hours preferably LFLSL 50 NSG LUKER or equivalent |
| 68 | OD166190/2026-2027:Supply, Conveyance, Providing testing and commissioning BUBU B4 B-22 Holder Dark Grey Garden LIGHT LODB 102E or equivalent brand suitably as required. |
| 69 | OD166191/2026-2027:Supply, Conveyance, Providing testing and commissioning 20W MOON BULB LBML20B or equivalent brand suitably as required. |
| 70 | OD166197/2026-2027:Supply, Conveyance, Providing testing and commissioning CUBE S5 12W WW LSSPK 12TR SPK Garden LIGHTS LODB or equivalent brand suitably as required. |
| 71 | OD167552/2026-2027:Supply and providing LED COBE CORVUS S1 SERIES LIGHT ,LIGHT BEAM 38DEGREE 18W ,WH, WW,NW Colour , LAGCOB18 S1 RG or equivalent brand as required. |
| 72 | OD166318/2026-2027:Supply and fixing of 415V, 63A TPN AC 23A switch Disconnector Unit including HRC fuses in sheet steel enclosure complete with handle , door interlock and pad locking using necessary boltsand nuts ,fixing the unit to wall ,CSSDF32D3N ,HSN CODE 8537, making good the damages,colour washind etc.including giving necessary connectionsas required. |
| 73 | OD166322/2026-2027:Dismantling the Defective DB and accessories From position and handed over to authorities |
| 74 | OD166323/2026-2027:Supply laying and joining of the 20 mm dia ISI mark PVC pipe with all required accessories in wall including a steel tap in the existing water line. |
| 75 | 90.3.18.1:Supply, fabrication, conveyance and fixing the following sizes of B class GI pipe bent to shape / cut and welded to shape and fixing the same to wall / parapet using clamps as noted along with each size, painting with 2 coats of synthetic enamel paint over a coat of zinc chromate primer, making good the damages, colour washing etc as required.25 mm dia with HG company fabricated clamps |
| 76 | OD166535/2026-2027:Supply, Conveyance, Providing testing and commissioning 7W LOUIS RECESSED DOWN LIGHTS WW, WH,NW COLOUR LECOBBO7 RG OR equivalent brand suitably as required. |
| 77 | OD166536/2026-2027:Supply, Conveyance, Providing testing and commissioning 2W AYLA LED RECESSED SPOT LIGHTS WW, WH, RD, BL, GR, PK COLOUR LESR02 GY OR equivalent brand suitably as required. |
| 78 | OD166537/2026-2027:Supply, Conveyance, Providing testing and commissioning 20W FLARE FLOOD LIGHTS WW COLOUR LFLD20N GY OR equivalent brand suitably as required. |
| 79 | 14.1:Excavation for foundation in soft soil including dressing of sides and ramming of bottoms, lift upto 1.5 m including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 metres. |
| 80 | 14.12:Providing 15mm thick cement plaster of mix 1:4(1 cement: 4 fine sand) at all levels |
| 81 | 14.7:Providing and laying in position cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) in foundation of pump, DG set etc including form work etc as required. |
| 82 | OD140281/2026-2027:Charges for preparing application/completion forms with sketch/scheme etc for KSEB connections Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 28, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 04, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodayNov 07, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender