Defence Statutory Bodies & Commissions/Committees Closing in 0 days TDR #58263896

Tender For Special Repair To Bldg No P-05 (Esh-5) At Ap-252 Of 25 Inf Dou At Rajouri Under Age B/R Dett-Iii Of Ge 862 Ews

Issued by Statutory Bodies & Commissions/Committees · Rajouri, Jammu and Kashmir
Tender Value
38.26 Lakhs
Estimated cost
Bid Submission
19 Nov 2026
0 days left
EMD
76600
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Rajouri → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender For Special Repair To Bldg No P-05 (Esh-5) At Ap-252 Of 25 Inf Dou At Rajouri Under Age B/R Dett-Iii Of Ge 862 Ews

Corrigendum

Sr No Corrigendum Date Corrigendum Type New Submission Date
1 05-Nov-2026 Corrigendum1 BOQ 19-Nov-2026

BOQ

Name of Work:- SPECIAL REPAIR TO BLDG NO P-05 (ESH-5) AT AP-252 OF 25 INF DOU AT RAJOURI UNDER AGE B/R DETT-III OF GE 862 EWS
Sl. No. Item Description
1M&L for taking down/ dismantling of existing roof treatment of any description such as old APP membrane roof treatment etc terracing including screed bed etc hessian base felt/ tar felt etc (any type and thickness) including removal of dismantled materials outside the MoD land, complete all as specified and directed.
2M&L for roof surface treated with PU Elastoseal primer to seal the pores and enhance the adhesive of the coating, supply and applying single component waterproofing liquid membrane based on pure, elastomatric, polythine resin cold applied of spray/ brush applied membrane with an elongation of 650% + 50 and tensile strength not less than 2 Mpa crack bridging ability not less than 2mm no leakage upto 5 bars of water pressure. Shore Hardness> 50 Shore. The minimum thickness to be applied shall be 1.5mm (overall) in two layers (each layer 750micron) or as per manufacture instructions so as to achieve thickness not less than 1.5mm including providing & laying of protective Geotextile fabric 150 GSM over than entire membrane with proper overlaps of 75mmcomplete all as specified and directed.Note :- (i) The treatment shall be carried out by authorised applicator approved by GE as per the manufacturer . (ii) Payment shall be made after providing warranty certified from the company. (iii) Roof treatment colour shall be in black/grey.
3M&L for PCC (1:2:4) type B-0 (using 12.5mm graded stone aggregate) providing, roof kerbs or mud stops,levelling course,pedding rounded or chamfered on edges including demolition of existing PCC, complete all as specified and directed.
4M&L for 10 mm thick rendering on fair faces of stone/ concrete surfaces in cement mortar 1:4 and finished even and smooth without using extra cement and mixed with water proofing complete all as specified and directed.Note:- Water Proofing Compound shall be measured separately.
5Demolition of brickwork or stone/ boulder masonry, for portions ordered to be dismantled, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.
6M&L for brick work with sub class 'B' old size bricks straight or curved on plan exceeding 6.00 m mean radius built in cement mortar 1:6 (except brick), complete all as specified and directed.
7Taking down cement plaster on brick/ stone or concrete surfaces including racking out joints hacking for key to any thickness scrubbing down with water including removing materials outside the MoD land, complete all as specified and directed.
8M&L for rendering 10mm thick on fair faces of brick/ stone work or concrete surface in CM (1:6) as in wall, finished even and smooth without using extra cement complete all as specified and directed.
9M&L for rendering 15mm thick on fair faces of brick/ stone work or concrete surface in CM (1:4) as in wall with WPC, finished even and smooth without using extra cement complete all as specified and directed.
10M&L for rendering 5mm thick as on ceiling on concrete surface in CM (1:3) as finished even and smooth without using extra cement complete all as specified and directed.
11Supply only liquid water proofing compound conforming to IS, complete all as specified and directed.
12M&L for preparation of new plastered surface of wall including cornices and applying two coats of distemper oil emulsion paint over a coat of wall care putty, complete all as specified and directed.
13Complete removal of existing teatment from wall surfaces including cornices applying two coats of distemper oil emulsion paint over a coat of wall care putty, complete all as specified and directed.
14M&L for preparation of newly plastered surface of wall and applying acrylic smooth exterior paint of required shade (multi colour pattern as approved by GE) two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm complete all as specified and directed.
15Complete removal of existing treatment surface of wall and applying acrylic smooth exterior paint of required shade (multi colour pattern as approved by GE) two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm complete all as specified and directed.
16M&L for two coats of white wash on ceiling including preparation of newly pastered surface complete all as specified and directed.
17M&L for one coat of white wash on ceiling including preparation of old decorated surface complete all as specified and directed.
18M&L for 100 mm thick cement concrete type C-2, 1:3:6 (using 40mm graded stone aggregate) as in sub base of flooring complete all as specified and directed.
19M&L for stone walling of squared rubble, regular uncoursed, well bonded, bedded and solidly hearted, built in CM1:6 complete all as specified and directed.
20Extra over stone walling for hammer dressing to face stone and dressing of face beds with maximum depression on face from straight edge held against the dressed surface on sand stone not exceeding 40mm, complete all as specified and directed.
21M&L for walling of random rubble stone masonry but except stone, uncoarsed, well bonded, bedded and solidly hearted built in CM 1:4 complete all as specified and directed.
22M&L for providing precast cement concrete 1:3:6 type C-1 (using 20 mm graded stone aggregate) in bonders (for stone walling) corbels, brackets, etc (of any section indicated), with plain fair faces, including chamfers, weatherings, throating etc and setting in mortar complete with joints to match complete all as specified and directed.
23M&L for raised pointing to random or polygonal rubble, un coursed or brought up to courses in cm 1:4 complete all as specified and directed.
24M&L for PCC type B-0,1:2:4 (using 12.50 mm graded stone aggregate) in coping and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed.
25S&F 75 mm PVC (SWR) pipes single socketed in any length with rubber ring joints laid in as weep hole, complete all as specified and directed.
26M&L for hardcore of broken stone boulders gauge not exceeding 63 mm, deposited, spread and levelled in layers not exceding 15 cm thick, watered and rammed to a true surface complete all as specified and directed.
27M&L for PCC 1:2:4 type C1 (using 20mm graded stone aggregate) as in surface channels and drains including demolition of PCC and form work, complete all as specified and directed.
28Forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/ stopped ends etc including demolition complete all as specified and directed.
29Taking down chowkhat or frame with shutter (without taking off shutter from the frame) exceeding 1.5 sqm but not exceeding 4.0 sqm each complete all as specified and directed.
30Taking down chowkhat or frames area not exceeding 1.50 Sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed.
31S&F frame work as in doors or gates of angles or other section with gusset plates, rails, braces etc, complete by using Fe 410-W (Gde E-250) quality a drilled for mixing of steel section or other covering doors, etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fitting (including MS plain back steel sheeting or other covering, running rails and guides) and hanging also fastening and fixing complete all as specified and directed.
32S&F steel ventilator with top hung shutter including hinges and steel peg stay and complete all as specified and directed.
33Supply only 3 mm thick plain sheet glass, ordinary quality not exceeding 0.50sqm each pane complete all as specified and directed.
34M&L for preparation of new steel surface and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed.
35Dismantling of wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.
36M&L for rolled mild steel section asin main and cross beam /column, hips and jack rafter, purlin where connected to common rafter, fixed with angle cleat or other connecting plates (Fe-410W Gde E-250) complete all as specified and directed.
37Preparation of old painted steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
38Cutting holes in brick walls in mud mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required complete all as specified and directed.
39Dismantling of plain or corrugated steel sheeting, any gauge, thickness including nainital or similar pattern roof coverings complete all as specified and directed.
40S&F prepainted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of approved colour (multi colour pattern as approved by GE) having tensile strength of 550 MPA as in roof covering fixed with self tapping screws complete all as specified and directed.
41S&F of prepainted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of approved colour (multi colour pattern as approved by GE) having tensile strength of 550 MPA as in ridges fixed with self tapping screws complete all as specified and directed.
42Providing and injecting chemical emulsion for post construction antitermite treatment along the external wall below concrete or masonary apron using chemical emulsion @ 2.25 liters per linear metre including drilling and plugging holes etc in apron complete all as specified and directed.
43Providing and injecting chemical emulsion for post constructional Antitermite Treatment of soil under existing floors using emulsion @ one litre per hole, 300 mm apart including drilling and plugging 12 mm dia holes with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floors complete all as specified and directed.
44Demolition of cement concrete of any description and in any position not otherwises pecifically provided for complete all as specified and directed.
45Demolition of cement concrete (unreinforced) in ground floors and paving not exceeding 15 cm thick and removal of debris from site all as specified and including removing materials outside the MOD land complete all as specified and directed.
46M&L for cement concrete work (PQC) in pavement/ hard standing of flexural strength 40 kg/sqcm in field using 400 kg of cement per cum complete all as specified and directed.
47M&L for forming 12 mm thick expansion joints filled with preformed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘A’ in 200 mm thick concrete slab complete all as specified and as directed.
48M&L for forming contraction (Dummy) joints 30mm deep x 10mm wide, filled with sealing compound complete all as specified and directed.
49M&L for cement concrete type C-2, 1:3:6 (using 40 mm graded stone aggregate) as in plinth protection, 75 mm thick complete all as specified and directed.
50S&F in repair PVC SWR pipes 110 mm bore single socketed in any length with rubber ring joint fixed to or laid in trenches or in floors, walls with steel clamps complete all as specified and directed.
51S&F in repair 110 mm bore PVC (SWR) bend with access door any radius complete all as specified and directed.
52M&L for air termination, single pointed copper rod, 12mm dia, 300mm long fixing over the GI Tube with the clamps after taking out old/ unserviceable complete all as specified and directed.
53M&L for GI tubes medium grade galvanised with all fitting, 25mm dia after taking out old/ unserviceable complete all as specified and directed.
54M&L for cement concrete 1:3:6 type C-1 (using 20 mm graded stone aggregate) as in bed blocks for holding GI pipe on roof top surface etc including necessary formwork, complete all as specified and directed.
55M&L for MS clamps made out of 25x6mm flat iron for holding/ supporting of pipe for cable on poles, including bolts, nuts and washers, MS plates minimum 3mm thick drilling holes and painting with two coats of synthetic enamel bituminus paint over a coat of red oxide primer, complete all as specified and directed.
56M&L for test point terminal block made of gunmetal/ phosphorus bronze of size 75x75x25mm drilled and screwed including 3 Nos, 8mm dia 25mm long hex head screw fixed complete all as specified and directed.
57M&L for copper strip of size 20 x 3.15mm burried in ground or fixed on walls/ floor with suitable saddles and screws beyond 7.5mtr of earth lead connecting with test point after taking out old/ unserviceable complete all as specified and directed.
58M&L for earthing with copper earth plate electrode 600mm x 600mm x 3.15 mm burried directly in ground earth pit not less than 2.25 mtr deep below normal ground level with top edge of the plate vertically to a depth not less than 1.5 mtr below ground level connected to the connecting copper strip 20 x 3.15 mm and including GI pipe 40 mm dia light grade for protection to the extend of 7.5 mtr as earthing lead by means of copper nuts, bolts as per connecting to equipment with provn charcol and salt complete all as per electric plate No 3 of SSR Part-1 including PCC chamber with RCC cover watering arrangement with GI pipe 20 mm dia medium grade and MS funnel, including excavation and earth work and returning, filling in including ramming and removal of surplus soil and testing on completion complete all as specified and directed.
59Taking down carefully copper/ aluminum point wiring (light, fan, socket or power) complete, including all fittings such as switches, ceiling roses, pendants, regulators sockets etc) removing material from the site and making good the disturbed surfaces of walls, floor or ceiling etc. to match with existing specifications complete all as specified and directed.
60M&L for point wiring for explosive with 1100 Volts grade PVC insulated single core FRLS cable with stranded copper conductor of size 2.5 Sqmm drawn through and including ERW rigid stove enamelled steel conduit of suitable size but not less than 19mm dia with and including bends, elbow, coupling etc (duly approved by CMRI Dhanbad) and including 2.5 Sqmm earth copper wire etc complete all as specified and directed.
61M&L for point wiring for explosive with 1100 Volts grade PVC insulated single core FRLS cable with stranded copper conductgor of sie 4 Sqmm drawn through and including ERW rigid stove enamelled steel conduit of suitable size but not less than 19mm dia with and includings bends, elbow, coupling etc (duly approved by CMRI Dhanbad) and incl 4 Sqmm earth copper wire etc complete all as specified and directed.
62M&L for flame proof weather proof switch socket and plug combined in LM-6 cable termination box in LM6 of capacity 16 Amps 250 volts including brackets made of MS steel of suitable size for mounting, complete all as specified and directed.
63M&L for flame proof rotary switch, in cast aluminium LM-6 suitable for 16 amps DF for four light fittings, earthing external 2 Nos and internal-1 No. 2 Nos 3/4 ET entry, hardware in stailness steel with anti corrosive epoxy powder coated with protection IP-65 equipment standard as per IS-2148/81 alongwith cable glands suitable for gas goups IIA, IIB approved by CCE and certified by CMRI complete including brackets made of MS steel of suitable size for mounting, complete all as specified and directed.
64M&L for flame proof 3 way lighting junction box in cast aluminium LM-6 material, size 3/4\\" ET, 125 mm dia, with 6 nos, 4 Sq mm terminals with flanged cover, earthings external 2 Nos and internal 1 No, 2 Nos 3/4\\" ET entry, hardware in stainless steel with anti corrosive epoxy powder coated with protection IP-65 equipment standard as per IS 2148/81, alongwith cable glands suitable for gas group IIA, IIB approved by CCE and certified by CMRI, complete all as specified and directed.
65M&L for aluminium LM-6 Exd distribution board zone 1 group IIA IIB FLP 8 ways including 01 No, 63 amps TPN MCB as incoming and 5-30 Amps 20 Nos SP MCB outgoing with required number of terminals of elemex clip on type and required nos of cable entries as bottom wall mounting frame alongwith cable glands with anti corrosive epoxy powder coated, hardware in stainless steel (SS-304) with protection IP-65 equipment standard as per IS 2148/81, approved by CCE and certified by CMRI including taking down old unserviceable complete all as specified and directed. Note: The rate quoted to be inclusive of brackets made of MS steel of suitable size for the above fittings.
66S&F LED light fitting 1x16 Watt flame proof, CMRI certified recommended for gas/ vapor group of IIA & IIIB, Zone 1 & 2 and IP 65 protection with die cast aluminum housing with heat resistant toughened glass with LED tube light fixtures driver, holders, connector etc. Complete with all accessories prewired and including connecting up with three core flexible copper conductor cable with suitable size including taking down old unserviceable complete all as specified and directed.
67M&L for earthing complete with galvanised steel earth plate electrode 60cm x 6cm x 6mm thick, buried directly in ground (earth pit not less than 2.25 meters deep below ground leel) with top edge of the plate not less than 1.5 meters below normal ground level, connected to galvanised iron strip 25 x 4 mm as earthing lead. Nuts and bolts check nuts and washers of galvanised iron or steel all as shown in electrical plate No.5 of SSR-1991 Part I & including necessary excavation and earth work. The rate also include charcoal and salt in alternate layers 20 mm dia pipe (Light grade) for watering, 40mm bore GI light grade protection pipe, funnel, wire mesh, PCC chamber in cement concrete (1:3:6) type C-I, 40 mm thick RCC (1:2:4) type B-1 cover and CI frame etc, complete all as specified and directed.
68Supply, lay, connect, test and commissioning XLPE LT 1100 volts underground earthed cable, PVC bedded, galvanized steel strip or wire armoured, electric power cable heavy duty 1100V with multi stranded, aluminum conductor of cross sectional area 4 core x 16 Sqmm including laying, testing and commissioning complete all as specified and directed.
69Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1.5 mtr depth for laying of cables and getting out in soft/ loose soil complete all as specified and directed.
70Returning and filling in soil including spreading leveling watering and well rammimg in layer not exceeding 25 cm complete all as specified and directed
71Removing of excavated soil not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and directed
72M&L for double wall corrugated pipe (DWC) of 40mm dia confirming to IS: 16205 Part-24 and IEC 61386 (Part-24) for cable protection of cable under/ above ground surface complete all as specified and directed. Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58263896
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 38.26 Lakhs
LAST DATE 19-11-2026
Authority
Authority Name Military Engineer Services
Work Description Tender For Special Repair To Bldg No P-05 (Esh-5) At Ap-252 Of 25 Inf Dou At Rajouri Under Age B/R Dett-Iii Of Ge 862 Ews
Basic Detail
Tender No GER-84/2026-27
Bidding Type Tender
Location
City Rajouri
State Jammu and Kashmir
Key Dates
Publish Date 05 Nov 2026
Submission Date 19 Nov 2026
Open Date 01 Jan 0001
Finance
Tender Value 38.26 Lakhs
Tender Fee 500
EMD 76600
Exemption Available
Document List
BOQ_893177.xls
d5ad661a-7283-407b-969c-9c1f058258f6.html
TD.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Nov 05, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 19, 2026
18:00 IST

Corrigendum-1 Issued

Clarifications on tender conditions and amendments issued.

Today
Nov 19, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Today

Tender Documents

Download All (ZIP) ↓
xls

BOQ_893177.xls

html

d5ad661a-7283-407b-969c-9c1f058258f6.html

pdf

TD.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender