Tender For Road Improvement Work By Dens In E-Block, Pratap Vihar (Ward 51), Covering The Stretch From E-807 (Near Siyaram Dairy) To E-826, Passing Through E-807 To E-828.
Tender Value
28.57 Lakhs
Estimated cost
Bid Submission
12 Nov 2026
13 days left
EMD
85717
Bank guarantee accepted
Document Fee
1416
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ghaziabad → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Road Improvement Work By Dens In E-Block, Pratap Vihar (Ward 51), Covering The Stretch From E-807 (Near Siyaram Dairy) To E-826, Passing Through E-807 To E-828.
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in cutting or in embankment in ordinary soil excavation to be in the form of regular pits not exceeding 0.50 M.in depth and earth work in embankment to be in 20 cm. layers including remming and dressing the surface to required levels and slopes and also including 1.50 M. lift and 30 M. lead. The earth from cutting to be used in making embankment or to be deposited as spoil banks with-in 30 M. distance as directed by the Engineer incharge. excluding Royallity. Wherever applicable for small work or Abadi area. (Where machine con not reach/move) S.I.253a |
| 2 | Dismentaling of cement concrete or brick granolithic floors including base concrete and including base concrete etc all PWD SOR 2022/697 |
| 3 | Disposal of earth up to 8.00 Km from site including etc. all complete work. S.I N0-231(A) SOR-2022 |
| 4 | S/L of 22.4 to 53 mm gauge stone ballast with stacking for measurement etc all complete as per direction of engineer in charge |
| 5 | Consolidation stone aggregates of 45-63mm/22.4-53mm size to water bound macadam,specification including spreading in uniform thickness S.I.No 752 |
| 6 | Providing applying tack coat with bitumen VG 10 Grade using bitumen pressure distributor at the rate of 0.25 kg per sqm on the prepared graunlar surface treated with primer and cleaned with hydraulic broom as per technical specifications causes 503 RMR |
| 7 | Providing and laying dense graded bituminous macdam with HMP producing an average output of 75 tonnes per hour using crushed aggregates from approved quarry of specified grading, premixed with bituminous binder (VG-30) @ 4.5 per cent by weight of total mix and filler,transporting the hot mix to work site,laying with a hydrostatic paver finisher to the required grade, level alignment,rolling with smooth wheeled. vibratory and tandem rollers to achieve the desired compaction (Ref. to Mort&HSpecification no. 507 ) Adjustment for bitumen shall be done as per job mix formula and e-in-c latter No 2651 Dt 27-07- 12 for proper completion of work as per direction of engineer-in- cgarge including all labour,T&P,taxes , labour cess etc. complete. |
| 8 | Providing applying tack coat with bitumen VG 10 Grade using bitumen pressure distributor at the rate of 0.20 kg per sqm on the prepared graunlar surface treated with primer and cleaned with hydraulic broom as per technical specifications causes. |
| 9 | Providing and laying bituminous concrete with HMP. crushed aggregate from approved quarry of specified grading premixed with bituminous binder(VG-30)@5.4 per cent by weight of total mix and filler,transporting the hot mix to work site,laying with a hydrestatic paver finisher to the required grade,level alignment,rolling with smooth wheeled vibratory and tandern rollers to achieve the desired compaction. |
| 10 | P/L of hot applied thermoplastic compund 2.5 mm thick including reflectorising glass leads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied Glass beads as per IRC:35-2015 The finished surface to be level,uniform and freestreaks and holes.S.I N0- 22.2SOR 2022 |
| 11 | Supply & laying 80mm thick precase cement concrete i-sape interlocking paver block (Grey color) with top layer of minimum 8mm thickness having plan dimension 200x(160+120mm) of O.P cement smoothing gloss finish,skid resistant manufacture from rubber moulds through vibro-compression mechanism, the compressive strength of concrete paver block shall not be less than 30mpa (M-30) and weight 5kg. per no. confirming to IS:15658-2006 including cost of material, labour,t&P etc. required for proper completion of the work as directed by Engineer-in-charge RMR |
| 12 | GST Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 29, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 12, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysNov 12, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 13 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender