Tender For Construction Of Water Supply Tank Including Laying Of Pipe Network At Bagh Ziyarat Bajard Mohallah Jada
Tender Value
10.95 Lakhs
Estimated cost
Bid Submission
03 Nov 2026
0 days left
EMD
21900
Bank guarantee accepted
Document Fee
600
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Kupwara → Jammu and Kashmir
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Water Supply Tank Including Laying Of Pipe Network At Bagh Ziyarat Bajard Mohallah Jada
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling precast concrete or stone slabs in walls, partition walls etc. including stacking within 50 meters lead (Thickness above 40 mm upto 75 mm) |
| 2 | Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed: all kinds of soil |
| 3 | Earth work in bulk excavation by manual means over areas (exceeding 30 cm indepth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earthlead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge.Ordinary Rock |
| 4 | Providing and fixing G.I. pipes complete with G.I. fittings excluding trenching and refilling etc. (external work) 40 mm dia. nominal bore |
| 5 | 25 mm dia. nominal bore |
| 6 | 20 mm dia. nominal bore |
| 7 | 100 mm dia nominal bore |
| 8 | Providing and fixing G.I. Union in G.I. pipe including cutting andthreading the pipe and making long screws etc. complete (new work) 40 mm nominal bore |
| 9 | 25 mm nominal bore |
| 10 | 20 mm nominal bore |
| 11 | 40 mm G.I. Tee (equal) |
| 12 | 25 mm G.I. Tee (equal) |
| 13 | 20 mm G.I. Tee (equal) |
| 14 | Providing and fixing GI elbow in GI pipe 25 mm GI elbow |
| 15 | 20 mm GI elbow |
| 16 | 40 mm to any smaller size G.I. sockets (reducing) |
| 17 | 25 mm to any smaller size G.I. sockets (reducing) |
| 18 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) 100mm nominal bore |
| 19 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) 40 mm nominal bore |
| 20 | Providing and laying of dry stone solling tightly hand packed. |
| 21 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level in 1:3:6 Nominal mix |
| 22 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level in 1:1½:3 Raft |
| 23 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level in 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 24 | Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level in 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 25 | Random Rubble masonry with hard stone in foundation and plinth including leveling up with cement concrete Cement mortar 1:6 (1 Cement : 6 coarse sand) 4x0.5x0.26)+2(2x0.5x0.26)=1.04cum |
| 26 | Centering and shuttering including strutting, propping etc. and removal of form for: Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc |
| 27 | Foundations, footings, bases of columns etc. for mass concrete |
| 28 | Centering & Shuttering using kitply including strutting propping etc Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc. |
| 29 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level Raft, slab, walls |
| 30 | 20mm cement plaster finished with a floating coat of neat cement of mix( 1 cement : 3 fine sand) Walls inside |
| 31 | 12mm Cement plaster finished with a floating coat of neat cement of mix( 1 cement : 4 fine sand) |
| 32 | 15mm thick Cement Plaster 1:3 Mix with floating coat |
| 33 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade |
| 34 | Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 35 | Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge. Made of G.I. wire of dia 4 mm. Total length 8m x fencing height 1.8m =14.4sqm |
| 36 | Providing and fixing of ISI mark of approved Double Flanged Sluice Valve incld. Tail pieces |
| 37 | Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6mm angle iron and 3mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approvedsteel primer.Using flats 30x6mm for diagonal braces and central cross piece Size of door: 1.8mx1.00m |
| 38 | Cover L.D. Rectangular 455x610mm with frame |
| 39 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m |
| 40 | Carriage of Materials By Mechanical Transport from source to dumping site including loading, unloading and stacking Carriage of pipes (average lead of 180km) |
| 41 | Cement and Steel for average Lead of 80km |
| 42 | Sand for average lead of 30km |
| 43 | Stone solling for average lead of 15km |
| 44 | 20mm Aggregate for avg. lead of 30km |
| 45 | 40mm nominal aggregate avg. 15 Km |
| 46 | Extra carriage of material from dumping site to actual work site by manual labor(average Head load of 500m) Carriage of pipes |
| 47 | Cement and Steel |
| 48 | Sand and 20mm Aggregate |
| 49 | Stone solling |
| 50 | 40mm nominal aggregate Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 29, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodayNov 04, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 1 dayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender