Tender For Door To Door Repair / Maintenance Including Polishing & Canning To Certain Items Of Wooden & Steel Under Age (I) Af Memaura
Tender Value
Ref. Documents
Estimated cost
Bid Submission
17 Nov 2026
15 days left
EMD
15100
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Lucknow → Uttar Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Door To Door Repair / Maintenance Including Polishing & Canning To Certain Items Of Wooden & Steel Under Age (I) Af Memaura
BOQ
| Sl. No. | Item Description |
| 1 | Taking out old U/S top from table dining 6 persons including cleaning the dust wax, grease etc from the frames & tightening the frame with triangular wooden bracket / steel bracket of approved size on each side of table and providing two coats of french polish and supply new top of 18/19mm thick MDF board Exterior grade(make-Century/greenply/Archid) one side decorative finish and one side commercial balancing white as approved by EIC, and fixing the same by high class formation cabinet maker including PVC edging of 1.5 mm duly pressed with edge bending machine on the edges of top all as specified and shown on drg with suitable size of steel screw and rest all as directed by EIC. Also fixing new PVC Buffer/shoes to all the legs of the table as per size approved by EIC. |
| 2 | -Ditto- all as per item No 01 before but from Teapoy |
| 3 | -Ditto- all as per item No 01 before but from Peg table |
| 4 | -Ditto- all as per item No 01 before but from Table centre/Table Varandah |
| 5 | -Ditto- all as per item No 01 before but from Table writing FD, Table 3' x 2' |
| 6 | -Ditto - all as per item No 01 here in before but table 3' x 3' |
| 7 | Taking out old U/S legs from table dining FD/Table dining 6 persons and supply and fixing new legs of Ist class hard wood (teak wood) all as shown on drg with PVC Buffer/shoes as per size approved by EIC and providing two coats of french polish on the same and as directed by Engineer-in-Charge. |
| 8 | -Ditto- all as per item No 7 before but for Teapoy |
| 9 | -Ditto- all as per item No 7 before but for Peg Table |
| 10 | -Ditto- all as per item No 7 before but for Centre Table |
| 11 | -Ditto- all as per item No 7 before but for Table writing FD and Table 3' x 2' |
| 12 | -Ditto - as per item No. 07 above but table 3' x 3' |
| 13 | Taking out old U\S long rail from table dining\Table dining 6 persons and S&F new long rail of Ist class hard wood (teak wood) complete all as shown on drgs and providing two coats of french polish on the same and as directed by Engr-in-charge. |
| 14 | -Ditto- all as per item No 13 before but Teapoy |
| 15 | -Ditto- all as per item No 13 before but Peg table |
| 16 | -Ditto- all as per item No 13 before but Table writing, Table 3'x2', Table 3`x3` |
| 17 | -Ditto- all as per item No 13 before but Centre table |
| 18 | Taking out old U\S short rail from Table dining 6 persons and S&F new short rail of Ist class hard wood (teak wood) complete all as shown on drgs and providing two coats of french polish on the same and as directed by Engr-in-charge. |
| 19 | -Ditto- all as per item No 18 before but Teapoy |
| 20 | -Ditto- all as per item No 18 before but Peg Table |
| 21 | -Ditto- all as per item No 18 before but Centre Table |
| 22 | -Ditto- all as per item No 18 before but Table writing FD, Table 3'x2' |
| 23 | Taking out old drawers from Table writing FD/ Table 3' x2' and S&F new one of same size, front made of 18 mm MDF board Exterior grade(make-Century/greenply/Archid), sides, back and bottom of 6mm thick plywood MR Grade with smooth functioning all as specified and shown on respective drgs or as directed by Engr-in-charge. |
| 24 | Dismantling the following old U/S damaged part \ components from Table writing and S&F new one with of same length, size made of 18 mm thick MDF board Exterior grade(make-Century/greenply/Archid) and 8mm thick plywood MR Grade with smooth functioning including two coats of french polish all as specified and shown on drgs and as directed by Engr-in-charge :- |
| 25 | Door leaf of side rack of table writing |
| 26 | Side portion of side rack of Table writing |
| 27 | Back portion of side rack of table writing |
| 28 | Bottom portion of side rack of table writing |
| 29 | Knob 25mm of drawer of Table Writing |
| 30 | Taking out all old damaged and U/S materials worn out from Chair dining CB W/O Arms, including cleaning the dust wax, grease etc from the frames and providing two coats of french polish before canning the items on all portion of Chairs, re-caning the items with approved quality white colour half round from centre with 2.5mm wide cane & 0.3 mm thick but border with 3 to 3.2mm wide and 0.4mm thick cane in Godrej pattern weaving all as directed & shown on drg and as directed by Engr-in-Charge. Also fixing new PVC Buffer/shoes to all the legs of the Chair as per size approved by EIC. |
| 31 | Taking out all old U/S materials from seat of chair dining PVC Map and S&F new PVC seat of AMCO including polishing two coat of french polish all around the frame of chair all as specified and shown on drawing and as directed by Engr-in-charge. Also fixing new PVC Buffer/shoes to all the legs of the Chair as per size approved by EIC. |
| 32 | Dismantling the following old U/S damaged component/ parts from repairable frame of chair dinnig CB, chair CB w/o arms, chair dining PVC Map and S&F new one with ist class Teak wood as per old one and reassembling the chair in proper manner including two coats of french polish all as specified and shown on drwgs and as directed by Engineer-in-Charge. Also fixing new PVC Buffer/shoes to the legs of the Chair as per size approved by EIC. |
| 33 | Front legs of chair dining CB/MAP |
| 34 | Rear legs of chair dining CB/MAP |
| 35 | Front rail of chair dining CB/MAP |
| 36 | Side stiffner of chair dining CB/MAP |
| 37 | Rear rail of chair dining CB/MAP |
| 38 | Side rail of chair dining CB/MAP |
| 39 | Taking out old U/S plywood from bed ply top and supply and fixing new ply wood BWP grade 12 mm thick IS 710, 7 No of ply of required size and fixed to bed frame by using screw wood steel 25mm apart as directed Make : Archid ply/ Greenply/Centuryply |
| 40 | Taking out old U/S long rail of bed plywood top and providing of new long rail of Ist class hard wood (teak wood) same shape and size all as specified and shown on drgs. |
| 41 | Taking out old U/S short rail of bed plywood top and providing of new long rail of Ist class hard wood (teak wood) same shape and size all as specified and shown on drgs. |
| 42 | Taking out old U/S legs of bed plywood top and providing of new legs of Ist class hard wood (teak wood) same shape and size all as specified and shown on drgs. |
| 43 | Taking out old U/S bottom rails of bed plywood top and providing of new one bottom rail of Ist class hard wood (teak wood) required size and shape all as specified and shown on drawings and as directed by Engineer-in-Charge. |
| 44 | Changing 4 mm ply OSTF on head rest and foot rest as per previous shape and size of approved shade and rest as specified and directed by EIC |
| 45 | Taking out old U/S head wing of bed plywood top and providing of new head wing of same materials shape and size all as specified and shown on drgs and as directed by Engineer-in-Charge. |
| 46 | -Ditto- all as per item No 45 here in before but foot wing |
| 47 | Dismantling and replacing the following damaged/unsv part of Sofa set 5 seater FD/MAP |
| 48 | legs as per drg of sofa set |
| 49 | arms as per drg of sofa set |
| 50 | front rails as per drg of sofa set |
| 51 | Bearer/Batten as drg of sofa set |
| 52 | top/ sides of back frame as per drg of sofa set |
| 53 | Cushion complete as per shape and size ref in drg with 40 density PU foam (make- Godrej/ Sleepwell) with upholstery of cloth of range not less than Rs. 450/mtr (make-as per sample),colour and shade & quality approved by EIC. |
| 54 | Chair Dining Offr Map with Cushion |
| 55 | changing complete seat with 75 mm thick PU foam 40 D (Godrej/ Sleepwell ) on 12 mm plywood MR Grade with best quality raxine / cloth (range not less than Rs.350/RM),( Make as per sample) rest as per drg |
| 56 | front Legs with PVC buffer as per drg of Chair Dining Offr Map with Cushion |
| 57 | Rear legs with PVC buffer as per drg of Chair Dining Offr Map with Cushion |
| 58 | Stiffner as per drg of Chair Dining Offr Map with Cushion |
| 59 | Back rest stiffners as drg of Chair Dining Offr Map with Cushion |
| 60 | Table Dining 4 Persons map: |
| 61 | 18 mm thick MDF Board of exterior grade (make-Century/greenply/Archid) one side decorative finish and one side commercial balancing white as approved by EIC shall be provided on top of table complete, rest all as per drg. |
| 62 | Triangular wooden bracket 100X100X20mm thick of table dining |
| 63 | Top long rail as per drg of table dining |
| 64 | Top short rail as per drg of table dining |
| 65 | Legs with shoe as per drg of table dining |
| 66 | Bed Hard Officer MAP |
| 67 | Supply and fix 12 mm thick plywood top BWP grade IS 710, 07 ply (make-Centuryply/ Greenply/ archidply) as per existing shape and size with 8 Nos shunken nut/bolts, appropriate hole shall be made with elecrtic drill machine complete rest all as drg and as directed |
| 68 | Hard rubber shoe std quality as per drg of bed hard steel MAP |
| 69 | replace head rest/ Foot rest with Pre Laminated exterior grade MDF Board 12mm thick complete as per drg of bed hard steel MAP |
| 70 | M&L for tightening the frame of below mentioned furniture items with nails of suitable size and polishing of those furniture door to door at MD Accn and BSO Yard by preparing the wooden funiture surface by complete removal of existing polish by scrapping down with grinding machine before applying two coat of French polish,of required shade and as directed by EIC |
| 71 | Peg table |
| 72 | Teapoy wooden |
| 73 | Center table |
| 74 | Table writing |
| 75 | Table 3'x2' |
| 76 | Table Dining 4 pers |
| 77 | Bed ply top |
| 78 | Table Dining 6 pers |
| 79 | Sofa set 05 seater |
| 80 | Dressing table gents FD and MAP |
| 81 | Dressing table ladies FD and MAP |
| 82 | Table dining 900x900 mm |
| 83 | Chair Dining Offr Map |
| 84 | Taking out all old U/S material (Nylon Newar/ Plywood) from Charpoy GI pipe and cleaning of dust, wax, grease and replacing the damaged legs/short rails and elbow etc and making good the frame duly tightening all the loose joints of legs/long/short rails and make good the frame in original shape complete all as directed. |
| 85 | Supply only GI Elbow 32mm dia 3 way heavy duty ISI marked |
| 86 | Supply only check nut 32mm dia heavy duty ISI marked |
| 87 | Supply only long rail of GI pipe 32mm dia medium grade |
| 88 | Labour for cutting the long rail in short rail legs size threading and fixing the frame of charpoy GI pipe complete all as specified and directed. |
| 89 | Supply and fixing 12mm thick ply wood commercial BWP IS 710, 07 ply plywood (Make-Century ply/greenply/archidply) and fixing same with two Nos of flat iron strip of size 900mm x 32mm x 5mm, bolts, nuts and washers, bolts of size 5x65 mm- 10 Nos round head bolts after drilling the three hole of each long rail and drilling the two hole on each short rail including tightening of loose frame/fixing of loose charpoy GI pipe component to make the frame fit for fixing including two coat of syntetic enamel paint over a coat of redoxide on the the iron strip complete all as per specified and as direction by EIC. |
| 90 | Taking out old U/S material from all type of steel table and supply of new top of 18/19mm thick veneered MDF board exterior grade (Make-Century/Greenply/Archid/Action tesa) as approved by Engr-in-Charge and fixing the same by high class furniture cabinet maker including PVC edging of 1.5 mm duly pressed with edge bending machine on the edges of top all as directed by EIC |
| 91 | Taking out all old damaged and U/S lever lock from door of Almirah steel large and medium and providing 5 to 7mm brass lever lock with duplicate key make Godrej/ Harrison duly tightened with machine screw steel with nuts including welding if required all as directed and specified and shown on drg. |
| 92 | Taking out all U/S damaged clamps from shelves of Almirah/lockers/cup board boards and S&F new clamps as per old one as required for adjusting the shelves as directed by Engr-in-Charge including two coats of synthetic enamel paint complete all as specified. |
| 93 | Taking out old U/S damaged handle from Almirah steel large and medium and S&F new one of same length and size and shape chromium plated cast iron handle of Godrej pattern and shall be fitted by using nut and bolts complete all as directed by Engr-in-Charge. |
| 94 | Taking out old U/S damaged lever lock from drawers and shutter of all type steel table and providing 5 to 7mm brass lock with duplicate key Make Godrej /Harrison and shall be fitted with machine screw complete all as spcified and directed. |
| 95 | Repair of drawers of Table steel Clk/Officer by making smooth functioning and painting with OG paint to match with existing surface complete all as directed by Engr-in-Charge. |
| 96 | Gas welding with brass rods including preparation of surface by derusting, scrapping and cleaning as required for welding to damaged parts/components of steel surface of furniture article where required to get it serviceable with smooth functioning all as directed by Engr-in-Charge. |
| 97 | Taking out all old U/S materials from seat and back of chair steel varandah cleaning the dust, wax, grease etc from the frame of chair including painting with two coats of synthetic enamelled paint white colour of make- Berger 1st quality all around the frame and recanning with 4 to 5mm wide and 4mm plastic cane in tighten side and 32 to 34 bends on around the frame end recanning with 4 to 5mm weaving side rest all as specified and shown on drg and all as directed by Engr-in-Charge. |
| 98 | Supply and fixing of hand rest of 1st class hard shisham wood duly white painted for chair tube steel varandah all as directed. |
| 99 | Supply & fixing of new rubber shoe/ cap plastic for steel varandah chair. |
| 100 | M&L cleaning, dusting, cobs, grease, wax etc from almirah steel medium with shelves derusted the rusted portion/parts up to the original surface/base by sand paper and painting with two coat of synthetic enamel paint with spray painting gun (one with primer and other finishing coat with synthetic enamel paint OG paint. Make - Asian/Berger inner and outer complete all around as directed by Engineer-in-Charge. |
| 101 | All as per item No 100 here in before but almirah steel large with shelves. |
| 102 | Charpoy IP Hardtop Map/ Charpoy IP Folding |
| 103 | Supply and fix 12 mm thick plywood top BWP grade IS 710, 07 ply (make-Centuryply/ Greenply/ archidply) as per existing shape and size with 8 Nos shunken nut/bolts, appropriate hole shall be made with elecrtic drill machine complete rest all as drg and as directed |
| 104 | Hard rubber shoe std quality as per drg of Charpoy IP Hardtop MAP/ folding |
| 105 | Computer Table Map and TP |
| 106 | Changing the top of the Computer table with Prelaminated MDF Board Ext Grade 19 mm thick of same size (Make-Century/Greenply/Archid/Action tesa) as approved by Engr-in-Charge and fixing the same PVC edging of 1.5 mm duly pressed with edge bending machine on the edges of top all as directed by EIC |
| 107 | Replacing the telescopic channel of Key board drawer with similar size |
| 108 | Sofa Set 5 Seater TP |
| 109 | Replacing the existing fabric/leatherite tapestry of Sofa Set with high quality fabric of color and shade as approved by EIC. The rate of fabric will be atleast Rs 450/RM. The fabric will be covered over entire sofa set 5 seater including arms and back as per existing design and shape of the sofa |
| 110 | Replacing the existing cushion of base and back of Sofa Set 5 seater with 4 inch thick PU foam of 40 density make Sleepwell and also replacing the foam wrapped around arms with 2 inch thick PU Foam as per existing shape and size of the sofa set Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 29, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 17, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 15 daysNov 24, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 22 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender