Tender For annual repair And maintenance of Of School Buildings In Education Wing Division During 2026-27.Sh:- Repair And Maintenance Of Motor Pump Sets And Panels, Running Operation Of Pumps, Supply Of Motor Pump Sets, Wire And Panels In 12 Nos Ndmc
Tender Value
6.98 Lakhs
Estimated cost
Bid Submission
06 Nov 2026
5 days left
EMD
13976
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
New Delhi → Delhi
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for annual repair And maintenance of Of School Buildings In Education Wing Division During 2026-27.Sh:- Repair And Maintenance Of Motor Pump Sets And Panels, Running Operation Of Pumps, Supply Of Motor Pump Sets, Wire And Panels In 12 Nos Ndmc Schools Under Sub-Division South Education Wing.
BOQ
| Sl. No. | Item Description |
| 1 | Rewinding and repairing of AC motor mono blockpump set 3 phase 400/440 volts , RPM with superiorcopper wire of appropriate size including electricmotor fan, disconnection, taking out, installation,connection and testing at pump room etc, as perdirection of Engineer-In- Charge. 5.00 HP MonoBlock Pump Set |
| 2 | Rewinding of AC motor mono block pump set 3phase 400/440 volts , RPM with superiorcopper wire of appropriate size including includingelectric motor fan, disconnection, taking out,installation, connection and testing at pump roometc, as per direction of Engineer-In- Charge. 7.50HP Mono Block Pump Set |
| 3 | Providing and fixing cast iron multi stage impellerfor replacing of existing impeller of 5 & 10 HP,mono block motor pumps set as per direction ofEngineer-In-Charge |
| 4 | Supply and fixing ball bearing of required numberSKF/NBC in existing motor pump setincluding greasing, cleaning, disconnection, takingout, installation, connection and testing at pumproom and setting in position for 5.0 & 7.5 HP monoblock motor pumps set as perdirection of Engineer-In-Charge |
| 5 | Providing and supplying Graphite Cotton Gland (Size 4 mm to 8 mm ) of required size inpump set as per direction of Engineer-In-Charge for5.0 & 7.5 H.P motor pump set |
| 6 | Providing and supplying Multipurpose Grease forpump set as per direction of Engineer-In-Charge for 5.0 & 7.5 H.P motor pump set |
| 7 | Providing and fixing 32 Amp TPN MCB (miniaturecircuit breaker) of make L&T /Fuuzi/ havellsincluding fixing charges etc, complete as per thedirection of Engineer-In-Charge. |
| 8 | Providing and fixing 63 Amp TPN MCB (miniaturecircuit breaker) of make L&T /Fuuzi/ havellsincluding fixing charges etc, complete as per thedirection of Engineer-In-Charge |
| 9 | Providing and supplying 6.00 mm x 3 core roundcopper cable complete as required and asper the direction and entire satisfaction of Engineer-in-Charge |
| 10 | Providing and supplying 4.00 mm x 3 core roundcopper cable complete as required and asper the direction and entire satisfaction of Engineer-in-Charge |
| 11 | Providing and supplying 2.50 mm x 3 core roundcopper cable complete as required and asper the direction and entire satisfaction of Engineer-in-Charge |
| 12 | Providing fixing and making connection of direct online starter with Analog Ammeter,Voltage, Indicators for three phases, auto / manual / bypass facility, elclosed with compactvermin proof rust proof mild steel powder coated panel box. suitable for Mono block pump of5 HP 3 Phase with maximum motor output at 440 V, 3 Phase, of Make and model L & T MK-1or equivalent make and as per the direction of Engineer-In-Charge |
| 13 | Providing and supplying rubber gas kit for monoblock pump set in suction and delivery ofrequired size as approved by engineer in chargecomplete |
| 14 | Providing and supplying of studs, nuts with bolts of(size 17 - 22) required size as per directionof Engineer-in-charge |
| 15 | Providing and Supplying KDS three phase 5 HPMonoblock pump set Kirloskar, crompton orequivalent make having minimum 2800 RPM,making Suction x Delivery 50 mm x 50 mmalong with original guaranty card of manufacture asper direction of engineer- in – charge |
| 16 | Providing and Supplying hexagon G.I. reducingbush 65mm x 50 mm as per direction ofengineer- in – charge |
| 17 | Repairing/servicing of existing old shaft of monoblock motor pump of required capcity upto 7.5 HPCost including repairing of shaft, transportation, nutbolt, services charges etc.Complete as per direction and satisfaction ofengineer in charge |
| 18 | Providing and fixing of new shaft of mono blockmotor pump of required capcity upto 7.5 HPCost including new shaft, transportation, nut bolt,services charges etc. Complete as perdirection and satisfaction of engineer in charge. |
| 19 | Repairing/servicing of existing old cylindrical typebush of mono block motor pump ofrequired capcity upto 7.5 HP Cost includingrepairing of bush, transportation, nut bolt,services charges etc. Complete as per direction andsatisfaction of engineer in charge |
| 20 | Providing and fixing of new cylendrical type bush ofmono block motor pump of requiredcapcity upto 7.5 HP Cost including new shaft,transportation, nut bolt, services charges etc.Complete as per direction and satisfaction ofengineer in charge |
| 21 | Providing and Fixing of Gun metal foot valeve withstrainer of size 50 mm as per direction ofengineer- in – charge |
| 22 | Purchase and taken away of dismanteled Mono block pump set of 7.5HP |
| 23 | Purchase and taken away of dismanteled Monoblock pump set of 5.0 HP Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 29, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 06, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysNov 06, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 5 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender