Tender For Renovation Of Community Center At Thamarai Nagar, Tiruvannamalai Tiruvannamalai District For The Year 2026-2027
Tender Value
40.34 Lakhs
Estimated cost
Bid Submission
16 Nov 2026
10 days left
EMD
41000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Tiruvannamalai → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Renovation Of Community Center At Thamarai Nagar, Tiruvannamalai Tiruvannamalai District For The Year 2026-2027
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling the existing damaged pressed tiles and clear the debris away from the site. |
| 2 | Dismantling the existing damaged Antiskid Floor tiles and clear the debris away from the site. |
| 3 | Earth work excavation for foundation in all soils and sub soils to the required depth as may be directed except in hard rock requiring blasting, inclusive of shoring, strutting and bailing out water wherever necessary, and depositing the earth in places shown clearing and levelling the site with an initial lead of 10 meters and lift as specified hereunder etc., complete in all respects complying with relevant standard specifications.( Including refilling ) |
| 4 | Supplying and filling in foundation and basement with Stone Dust in layers of 0.15 m thickness well watered rammed and consolidated complying with relevant standard specifications including cost of quarry dust as directed by the Departmental officers. |
| 5 | Cement concrete 1:5:10 (One of cement, five of M.Sand and ten of hard broken stone jelly) for foundation and flooring using 40 mm size broken stone jelly inclusive of shoring, strutting, baling out water wherever necessary ramming, curing etc., complete in all respect complying with relevant standard specifications and as directed by the departmental officers. |
| 6 | Cement Concrete 1:2:4 (One Cement, Two crushed stone sand and Four hard broken stone jelly) using 20 mm gauge hard broken granite stone jelly for all RCC items of works excluding cost of reinforcement grill and fabricating charges, centering and shuttering but including Super Plasticiser, laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary and bearing surfaces of walls, beams etc. shall be finished smooth with Cement Mortar 1:3 (One Cement and Three Sand) and kraft paper laid over it without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers - manual mix (SD - 154) |
| 7 | Brick work in cement mortor 1:5 ( One of cement and five of sand) using Chamber burnt Second classof size 230x110x75 mm having minimum average crushing strength of 50Kg/sqcm in foundation & basement including dewatering wherever necessary proper setting curing etc., complete in all respects complying with relevant standard specifications and as directed by the departmental officers. |
| 8 | Brick Work in cement mortor 1:6 ( One of cement and six of M.Sand ) using Ground moulded chamber burnt bricks of size 230 x 110 x 70 mm having minimum average crushing strength of 50Kg/sqcm in foundation & basement including dewatering wherever necessary proper setting curing etc., complete in all respects complying with relevant standard specifications and as directed by the departmental officers. |
| 9 | Brick partition walls of 11.50cm thickness using best quality Burnt Clay Brick of size9” x 4 1/2” x 3” with class designation of 7.5 conforming to IS 1077-1992 in Cement Mortar 1:3 (One Cement and Three CS Sand) using hoop iron reinforcement if found necessary including Cost of Mortar Plasticizer, curing etc. complete complying with standard specification and as directed by the departmental officers. (Hoop ironreinforcement will be measured and paid for separately) |
| 10 | Reinforced Cement Concrete 1:1.5:3 (One of cement , two of M sand and four of Hard broken stone jelly) for all RCC works namely TEE, ELL or rectangular beams, lintel, parapet cum drops, waist and landing slab, canophy, circular column, fin projections, sunshades, window boxing slab, slab and other similar works using 20mm gauge hard broken stone jelly excluding the cost and fabrication of reinforcement grills, shuttering and centering but including vibrating, laying, curing, finishing etc., complying with relevant standard specifications. |
| 11 | Foundation and basement |
| 12 | Ground Floor |
| 13 | Supply and erecting, centering for sides and sofits including supports and strutting up to 3.29 mt high for plane surfaces such as RCC slabs, rectangular beams, Tee (or) Ell beams, lintels, Bed Blocks, slabs, landing beam, canopy side slab or boxing or vertical slabs, rectangular or square or round columns etc. as detailed below with all cross bracings using MS sheets of size 90cm x 60cm and BG 10 stiffened with welded MS angles of size 25mm x 25mm x 3mm for boarding laid over silver oak or country wood joist of size 10cm x 6.5cm spaced at about 90cm centre to centre and supported by casurina props 10cm to 13cm dia spaced about 75cm center to centre or at nsuitable intervals etc. complete complying with standard apecification and as directed by the Departmental officers. |
| 14 | for Column footing,grade beam,plinth beam,staircase steps,sill slab |
| 15 | Centering for rectangle column & square column |
| 16 | Centering for RCC floor slab,roof slab,loft& landing upto 3.6m floor height |
| 17 | Centering for RCC floor,lintel beam,cantilever beam,Bed block upto 3.60m height in all floors |
| 18 | Supply and Fixing of Wood Polymer Composite Board (WPC) solid door frame and 25mm thick shutter, the frame consists of extruded with size 75mm x 50mm. The inner core made of rigid WPC compound with minimum shore hardness of 55 and Bulk Density 0.8 Grms/Cub.C.Mt. The Frame shall be fixed to the wall using 10 x 100mm long MS Screw through the frame by using PVC fasteners A minimum of 3nos screws to be provided for each vertical member. The overall size of frames shall be with suitable rebate for housing the shutters and the shutters consists of 25mm thick Polymer Composite Board (WPC) single core Extruded door shutter, with one side digital Embo printing design. To avoid duplication, the printing design shall have the logo og the WPC brand approved by departmental officers. All the material used in the construction are approved Brand /reputed Brand as per agreement condition. |
| 19 | Supplying and fixing in position of colour glazed wall tiles of any size 6mm thickness laid in cement mortar 1:2( One of cement and two of sand) 10mm thick for wall facing / dadoing ,skirting over the plastered surfaces including cost of tiles fixing in position cutting the tiles to the required size wherever necessary pointing the joints with white/ colour cements neatly curing, finishing including cost of cement mortar etc complete and as directed by the departmental officers. Note:( The colour make and quality shall be approved from the E.E before use ) Note: ( only one particulars size of ceramic wall tiles to be used for one building) |
| 20 | Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The window should be got approved from the Chief Engineer before use on work. |
| 21 | Supply and fixing of UPVC ventilator made out of hollow multi-chambered UPVC sections having isolated drainage and reinforced with galvanized steel. The corners and joints shall be mitre cut and fusion welded. The outer frame of the window shall be made out of UPVC sections having an overall size of 60mmx60mmx40mm having wall thickness of 2.3mm, + or - 0.3mm and provided with steel reinforcement at a hardware location and size of 27mmx21.5mm. The fixed mullion shall be made out of UPVC sections having an overall size of 76mmx60mmx36mm having wall thickness of 2.3mm, + or - 0.3mm. The ventilator should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The ventilator should be got approved from the Chief Engineer before use on work. |
| 22 | Supplying and fixing Mild Steel grill as per the approved design including one coat of primer and labour for fixing in position etc. all complete |
| 23 | Supplying and fixing in position of colour Antiskid floor tiles of any size of approved special quality of 6mm thickness laid in cement mortar 1:3( One of cement and three of sand) 20mm thick for flooring including cost of tiles fixing in position cutting the tiles to the required size wherever necessary pointing the joints with white/ colour cements neatly curing, finishing including cost of cement mortar etc complete and as directed by the departmental officers.Note:( The colour and quality shall be approved from the E.E before use only one particular size of ceramic wall tiles to be used for one building) |
| 24 | Finishing the top of flooring with cement concrete 1:3 Ellis pattern flooring 20mm thick in cement concrete 1:3 (One of cement and Three of stone jelly) using 10mm and less hard broken stone chips (No sand to be used) including laying ,curing, finishing..etc complete complying with relevant standard specifications and as directed by departmental officers. |
| 25 | Plastering in C.M 1:3 (one of cement and three of P sand) 10mm thick for bottom of sunshade, ceiling in all floors, including hacking the RCC surface, providing necessary water bond using same mortar mix wherever necessary and scaffolding, curing ,finishing etc all complete in all respects complying with relevant standard specification and as directed by the departmental officers. |
| 26 | Dismantling the Existing damaged plastering surface and clean the debris away from the site and RePlastering the same in C.M 1:3 (one of cement and three of P sand) 10mm thick for bottom of sunshade, ceiling in all floors, including hacking the RCC surface, providing necessary water bond using same mortar mix wherever necessary and scaffolding, curing ,finishing etc all complete in all respects complying with relevant standard specification and as directed by the departmental officers. |
| 27 | Plastering with cement mortar 1:4 ( One of cement and four of P sand) 12mm thick finished with neat cement including, providing band cornice scaffolding curing etc., complete complying with relevant standard specification and as directed by the departmental officer |
| 28 | Plastering with cement mortar 1:5( One of cement and five of P sand) 12mm thick finished with neat cement including, providing band cornice scaffolding curing etc., complete complying with relevant standard specification and as directed by the departmental officer |
| 29 | Finishing the top of roof slab with one course of hydraulically pressed tile of approved superior quality of any size 25 mm thick laid over weathering course in cement mortar 1:3, 20 mm thick pointed with coloured cement as directed by the departmental officers. |
| 30 | Painting Old Wood work One coats with best approved Ist class Synthetic Enamel ready mixed paint in addition to one coat of primer,removing paint from door,window and wood work by manual labours, etc., complete in all respects complying with relevant standard specification and as directed by the departmental officers. ( The quality and shade of paint should be got approved by the Executive Engineer before use). |
| 31 | White washing three coats using clean shell lime slacked and screened including cost of lime, gum, blue brushes, scaffolding etc., complete in all respects and as directed by the departmental officers. |
| 32 | White washing one coats using clean shell lime slacked and screened including cost of lime, gum, blue brushes, scaffolding etc., complete in all respects and as directed by the departmental officers. |
| 33 | Painting Old Plastered Wall Surface with Two finishing coats of ready mixed (Emulsion) of approved quality and colour over the existing wall in all floors etc., complete complying with standard specification and as directed by the departmental officers. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.) |
| 34 | Painting the new walls two coats with best approved quality weather shield exterior emulsion paint over one coat of primer including cost of brushes, emulsion paints scaffolding curing etc., complete in all respects complying with relevant standard specification and as directed by the departmental officers. ( The quality and shade of paint should be got approved by the Executive Engineer before use). |
| 35 | Painting with ready mixed I class synthetic enamel paint, Two coat over old Iron work of approved quality and shade. The paint should be supplied by the contractor at his own cost. (The quality and shade of paint should be got approved from EE before use on works) etc., complete in all respects, complying with relevant standard specifications and as directed by the departmental officers. |
| 36 | Supplying ,fabricating and placeing in position of Mild steel/Ribbed Tor steel grills for reinforcement for all RCC works in all floors including the cost of binding wire, bending, tying, etc., complete in all respects complying with relevant standard specification and as directed by the departmental officers. |
| 37 | Supplying and fixing in position of stainless steel hand rails with Balustarder for stair case with top hand railing pipe of 50.80 mm dia with 40mm vertical post at 1000mm interval to a height of 900 mm with horizontal support fabrication pipes of 38.30 mm dia - 3 line, pipe design with 12 mm dia pipe connecting two vertical and bottom horizontal pipes and fixing 100 mm dia ring with 12 mm dia base cup for every vertical post all stain less steel pipes are 1.60 mm thick pipe, 304G to be fixed and fabrication with gas tungsten arc welding, fixing with lock fix paste and cleaning with passivation paste to remove the welding film with fine polishing including drilling the tiles or granite including conveyance, loading unloading etc all complete complying with relevant standard specification and as directed by the departmental officers.(The quality of all the materials should be got approved before use on works) |
| 38 | Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase near wet riser using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick will be provided with tubular supports made of 304L Grade Stainless Steel pipe of tubular 25mm dia of 1.60mm thick welded to the railing. The supports will be grouted into the wall and provided with 93.00mm thick Stainless Steel circular base plate of 304 Grade. The rate shall included for grouting into concrete with necessary supporting arrangements the hand rail in floor polishing buffing, bonding, cutting, grinding, conveyance, welding charges, electrical charges, etc. complete. |
| 39 | Supplying, laying and jointing UPVC pipes of Class 6 (having working pressure of 12.50kg/sq.cm) conforming to IS 4985- 2000 of approved quality and best variety conforming to BIS of the following dia including cutting and fixing UPVC specials using UPVC adhesives (but excluding cost of such specials) in accordance with IS 7634-3 (2003) and fixing into wall with teak wood plugs, PVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges upto 4 metre height above ground level, etc., complete complying with standard specifications. The PVC pipes shall be got approved by Executive Engineer before use on works - External water supply above ground level / Below ground level.(Commercial applications) |
| 40 | Above Ground Level |
| 41 | 65 mm dia UPVC pipes |
| 42 | For laying UPVC pipes of dia 40mm |
| 43 | For laying UPVC pipes of dia 25mm |
| 44 | Supplying and fixing of GM Gate valve 40 mm Dia heavy duty labour for fixing etc, all complete and as directed by the departmental officers., (The quality and brand of fittings should be got approved from Executive Engineer before use). |
| 45 | Supplying and fixing of Concealed stop cock Fitting including cost of fittings labour for fixing etc, all complete and as directed by the departmental officers., (The quality of fittings should be got approved from Executive Engineer before use). |
| 46 | Supplying and fixing of Health facuilt and Two Way CP Tap including cost of fittings labour for fixing etc, all complete and as directed by the departmental officers., (The quality of fittings should be got approved from Executive Engineer before use). |
| 47 | Supplying and fixing in position White / Colour Glazed Model Floor Mounted European Water Closet of best quality and approved make with 100mm “P” or “S” trap connecting with CI pipe of 100mm dia / PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn, teak wood plugs, brass screws, etc., including supplying and fixing 10 litres capacity PVC / 12.5 litres capacity porcelin low level flushing tank with a pair of CI brackets, etc., complete with all fittings, such as, 15mm brass ball valve with polythene float with brass handle, union coupling connected by means of 40mm white PVC flush hand using indian adopter joint including all internal fittings, such as, 15mm bras connections, 15mm GM wheel valve, 15mm brass nipple (2 Nos.), 15mm nylon connection, TW plugs, screws and also giving necessary connection to the PVC pipe and painting the CI brackets with 2 coats of approved paint over one coat of red oxide primer, dismantling the masonry and re-doing the dismantled masonry to original condition,etc., complete complying with standard specifications. All the material used in the construction are approved Brand /reputed Brand as per agreement condition. Floor Fitting |
| 48 | Supplying and fixing of C.P Bip cock Long Body with wall flange like ESSCO, Jaquar fitiing including cost of fittings labour for fixing etc, all complete and as directed by the departmental officers., (The quality and brand of fittings should be got approved from CE &SE before use). |
| 49 | Supplying and fixing of C.P Bip cock short Body with wall flange like ESSCO, Jaquar fitiing including cost of fittings labour for fixing etc, all complete and as directed by the departmental officers., (The quality and brand of fittings should be got approved from CE &SE before use). |
| 50 | Supplying and fixing of C.P mixer 3 in 1 with provision of Hand Shower with jaguar fittings 15mm long bend pipe and wall flange with bush & button divertor fiting, with areator like Jaquar fitting or equivalent, including cost of fittings, labour for fixing etc,all complete and as directed by the departmental officers., (The quality of fittings should be got approved from CE &SE before use). |
| 51 | Supplying and fixing of C.P Over Head Shower with 115mm long bend pipe and wall flange Jaguar Fitting or equivalent including cost of fittings, labour for fixing etc, all complete complying with relevant standard specifications and as directed by the departmental officers., (The quality of fittings should be got approved from CE &SE before use). |
| 52 | Supply and laying of PPR pipe 25 mm dia for Hot Water Line including the cost of suitable specials like Elbow, Tee reducers, Plug , union, bend, coupler, nipple etc., wherever required above ground level including the cost of Teflon tape, special clamps, GI Bolts and Nuts, nails, etc., fixing on wall to the proper gradient and alignment and redoing the chipped masonry after the pipes are laid etc., complying with relevant standard specifications & as directed by the departmental officers. |
| 53 | Supplying and fixing of porcelain wash basin superior variety of approved quality of size 550mmx400 mm (22\\" x 16\\") including cost and fixing of CI brackets, PVC waste pipe, CP tap, wheel/angle valve, pvc, connection, CP waste plug, with stainless steel chain etc., complete complying with relevant standard specifications in all respects as directed by the departmental officers. (The quality and brand of Wash basin and accessories shall be got approved from the Executive Engineer before supply) |
| 54 | Supplying and fixing in position best quality PVC soil / waste pipes of various dia having 6 kg / sq.cm. pressure BIS mark and providing leak proof joints using PVC adhesives including fixing to the wall with special PVC / MS clamp, teak wood plugs, brass screws, etc., and making connection to all sanitary fittings, dismantling masonry / RCC works wherever found necessary and making the good dismantled portion to the original condition, including testing for any leakages, etc., complete complying with standard specifications. (The PVC pipes should be got approved by the Executive Engineer before use on works). The rate for earth work excavation will be measured and paid separately in the cases where the pipe lines are proposed to laid below ground level (SD 673) |
| 55 | 110 mm dia PVC Pipe |
| 56 | 75 mm dia UPVC Pipe |
| 57 | Supplying and fixing of PVC Nahani Trap not less than 110x75mm 4 way / 2 way (Superior variety) having minimum of water seal of 50mm confirm to relevant I.S. specifications with its latest amendments including resting on the bed of brick jelly concrete 1:5:10 (One of cement, five of sand & ten of 40 mm gauge brick jelly) etc., complete complying with relevant standard specification and as directed by the departmental officers (The PVC Nahani Trap should be got approved from the EE before use) . |
| 58 | Supplying, laying and joining the following dia Pressure polyvinyl chloride (pvc- u) pipes For use in underground drainage and sewerage systems as per IS socket ends in dry conditions and tested with water including necessary earth work exacavation for trenches and refilling the same well rammed and consolidated after the pipes are joined with PVC solution and tarred yarn laid to proper gradient to the alignment etc., complete complying with relevant standard specification and as directed by the departmental officer. ( SW pipes should be got approved by the Executive Engineer before laying) |
| 59 | 110mm dia PVC pipe |
| 60 | 160mm dia PVC pipe |
| 61 | Construction of INSPECTION CHAMBER following clear sizes including earth work excavation, CC 1:5:10 of 10 cm thick and brick work in Cement Mortar 1:5 [One cement and Five sand] using best quality of Clay burnt Bricks of size 9” x 43/8” x 23/4” with Class designation of 7.5 and Plastering with Cement Mortar 1:3 [One Cement and Three Plastering Sand] 12 mm thick to inner and outer sides and wearing coat 1:3:6 [One Cement, Three crushed stone sand and Six Aggregate] 15 cm thick and covered with precast slab 5 cm thick etc., complete complying as directed by the departmental officers as per standard specification.(SD 683) |
| 62 | 60x60x60 cm |
| 63 | Manufacturing, supplying and fixing Precast Reinforced Cement Concrete slabs of following thickness in RCC 1:2:4 (one cement, two crushed stone sand and four aggregates), using following HBGS jelly excluding cost of reinforcement steel in position but including cost of moulding charges, casting of slab, finishing, curing and fixing in position in all floors etc., complete complying with standard specification and as directed by the departmental officers |
| 64 | Laying Paver Block 63 mm Tk etc., complete in all respects complying with relevant standard specification and as directed by the departmental office |
| 65 | Supply and fixing of vertical type 4 Way TPN MCB DB ( Double Door type in sheet steel enclosure in flush with wall and making good of the concealed portion with inter connection and earth connection. The MCB DB and MBB'S should be with ISI mark. Incoming 63 AMPS oUTGOING : 6 TO 32 A SP MCB -12 NOS and all complete and as directed by the departmental officers. |
| 66 | Run of main with 4 wires of 6 Sqmm Copper PVC insulated unsheathed single core Multi Strand Fire Retardant 1.1 KV grade copper cable with ISI Mark conforming to IS:694/1990 and with continuous earth by means of 2.5 sqmm copper PVC insulated unsheathed single core Multi Strand Fire Retardant 1.1 KV grade copper cable with ISI Mark conforming to IS:694/1990 in fully concealed 32mm dia rigid PVC conduit pipe with ISI mark etc., including cost of all materials, specials etc. all complete and as directed by the departmental officers. |
| 67 | Supplying and fixing 15amps switch on a suitable MS box 16g thick concealed and covered with 3 mm thick laminated hylem sheet inclusive of all connections and cost of all materials all complete, complying with relevant standard specifications & as directed by the departmental officers. |
| 68 | Wiring with 1.5sqmm copper PVC insulated unsheathed single core cable for Light Point with Ceiling Rose |
| 69 | Light points with ceiling rose. |
| 70 | Supplying, fixing, connecting and commissioning of 25AMPS Metal clad socket for Air Conditioner (Superior variety) combined with 20AMPS SP MCB in Manufactures mount box fixed flush with the wall including cost of material, necessary interconnection etc, switch on suitable angle Iron frame work with necessary earthing etc., all complete and as directed by the departmental officers., (The quality and brand of fittings should be got approved from CE & SE before use). |
| 71 | supplying and fixing of automatic Electrical water heater with copper container,with glass wool/ Puf Insulation with MS power Coated shell suitable for 25 Litrecapacity 230V/ 1000W etc all complete complying with relevant standard specifications and as directed by the departmental officers. |
| 72 | Wiring with 1.5sqmm copper PVC insulated unsheathed single core cable for 5n Amps 5 Pin Plug Socket point at Switch Board Itself |
| 73 | Supplying and laying of 3-1/2 x 50 sq . Mm.PVC armoured LTUG Cable in a trench to be excavated at a depth of 0.75m putting 0.15m layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good. |
| 74 | Earthing as per ISI Specification with an earth electrode of 2.10 nMetre Class 'B' GI pipeof dia dia not less than 40 mm with copper earth plate of size 125 mmx50 mmx 6 mm with necessary funneling arrangements with necessary masonry work and with 38 mm RCC Cover slab for the Brick Masonry. |
| 75 | Supply and fixing of brass cable gland for 3-1/2 x50 sq.mm PVC armoured LTUG cable with earth connection |
| 76 | Supply and providing cable and termination of 3-1/2 x 50 Sq.mm PVC LTUG Aluminium armouired cable withnecessary alluminium socket by crimping etc with electrical connection complete. |
| 77 | Supplying and Fixing of 25 KVA Diesel Generator Set with acoustic enclosure conforming to CPCB IV+ Norms and BIS Specifications With Standard Control Panel., all completed and as directed by the Departmental officers.(M-2345) |
| 78 | Repolishing the mosaicflooring including polishing stone and hire charges for polishing machine but excluding cost of electrical chargesetc., all complete (W-0114) |
| 79 | Supplying and fixing of 48'' ceiling fan 5 star rated ( without regulator) higher end directed by the departmental officers. ( The Brand/Quality of fittings and Fan has to be got approved by the EE before fixing) .(M-1349) |
| 80 | GST @ 18% Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 29, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 16, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysNov 16, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 10 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender