Defence Statutory Bodies & Commissions/Committees Closing in 4 days TDR #58260602

Tender For Special Repair Of Furniture Against Ber And Provn Of 105 X Double Bunk Beds At 629 Tpt Asc Under Ge(West) Delhi Cantt-10

Issued by Statutory Bodies & Commissions/Committees · New Delhi, Delhi
Tender Value
91.12 Lakhs
Estimated cost
Bid Submission
26 Nov 2026
4 days left
EMD
1.61 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
New Delhi → Delhi
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender For Special Repair Of Furniture Against Ber And Provn Of 105 X Double Bunk Beds At 629 Tpt Asc Under Ge(West) Delhi Cantt-10

BOQ

Name of Work:- SPL REPAIR OF FURNITURE AGAINST BER AND PROVN OF 105 X DOUBLE BUNK BEDS AT 629 TPT ASC UNDER GE(WEST) DELHI CANTT-10
Sl. No. Item Description
1Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority : HQ CWE NO 2 DELHI CANTT-10 NAME OF WORK: SPL REPAIR OF FURNITURE AGAINST BER AND PROVN OF 105 X DOUBLE BUNK BEDS AT 629 TPT ASC UNDER GE(WEST) DELHI CANTT-10 Contract No : CWE/WEST/TOKEN-47/2026-27 Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Rates only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Sch. itemNo. Item Description Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency RATE In Rs. Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words
2Almirah Medium steel , Drawing No- HFD-2056 DIMENSION:- (a) The overall size of almirah medium steel is (1270 X 765 X 440)mm with three shelves. (b) 1.25 mm thick MS Sheet Back (c) 1.25 mm thick MS Sheet shelves. (d) 1.6 mm thick MS Sheet channel base end covered. (e) The handle shall be made of steel. Finish : Powder Coated pre-treated. Rest all as per drawing
3Almirah Large steel 1/2 Hanging 1/2 Shelving, Drawing No- FD/E6/MAP/18DIMENSION:-The Overall size of almirah large steel is 1900mm high, 910mm wide and 490mm deep.DESCRIPTION:-a) It shall be made of 1mm thick MS sheet . All joints shall be riveted and welded thoroughly. b) The almirah shall have three shelves,one locker and one drawers with two partitions at upper half with hanging arrangement.c) The almirah shall have decorative chrome plated handle 150mm long fitted to three way locking system .d) The handle of inside drawer shall be made to \\"S\\" Shape by bending the MS sheet of front face of drawer to full length.e) The locker of almirah shall be provided with two way bolt locking system having duplicate flat keys and one brass lock shall also be provided at front shutter with stainless steel key plate of dia not less than 40mm. f) Rest all specifications and dimensions are as per drg Make of Hardware- Harrison/EBCO/Hettich/Link/Godrej FINISH:- he almirah shall be dry powder coated in double shade of colours off white after preparation of surface and application of metal primer. The sjades will be decided by engr-in-charge or as directed by GE.
4Charpoy IP hard top, Drawing No- FD/MAP-II/01DIMENSION: Overall size shall be 1980mm long, 900mm wide and 440mm high.DESCRIPTION:a) The frame of charpoy shall be made of MS hollow square pipe of 16 Gauge as per specified sizes mentioned in drg.b) Top of charpoy shall be of 12mm thick BWR plywood of grade -A; place and fix over the stiffners and cleat with 12 Nos of flat head bolt of 6 mm dia,50mm long nylon insert nut and round washer c) Each leg of charpoy shall be provided with 32mmx32mmx5 mm thick MS Plate shall be welded at bottom of each leg.Rest all specifications and dimensions are as per drg FINISH:-The charpoy shall be dry powder coated in black after preparation of surface .
5Charpoy folding IP with Hard top, Dwaring No- FD-388(R) DIMENSION:The overall size shall be 1980mm long,900mm wide and 400mm upto ply top.DESCRIPTION:a) The frame of the charpoy shall be 25mm dia MS conduit pipe of 16 Guage.b) Top of charpoy shall be of 8mm thick BWR ply of grade -A; place and fix over the stiffeners with 16 Nos of flat head bolt of 6 mm dia,50mm long nylon insert nut and round washer. c) Each leg of charpoy shall be provided with 25mm internal dia hard rubber shoe. Rest all specifications and dimensions are as per drg FINISH:-The charpoy shall be dry powder coated in black after preparation of surface .
6Chair dining, Dwaring No- FD/E6/MAP/10Dimenstion:- (a) Overall height should be 900mm. (b) (25 X 45)mm Teakwood Back. (c) 15 X 30)mm Teakwood VER Strips. (d) 75 mm thick, 32 density foam with fabric on seat of 12 mm thick ply. (e) (65 X 25)mm teakwood rail on all side. (f) (30 X 40)mm teakwood front and rear leg. (g) (20 X 25)mm teakwood stiffner.
7Chair Easy with Cushioned, Dwaring No- FD-358DIMENSION: The overall size shall be 510 mm wide x 545mm deep 740 mm high from back.DESCRIPTION:a) All wood to be used shall be 1st class hard teak woodb) The seat shall be made of 4mm thick plywood ,75mm thick PU foam cushion (32 density) covered with best quality tapestry cloth of rate not less than Rs 450 per mtr and not less than 300 GSM by weight.c) The back shall be made of 4mm thick plywood ,50mm thick PU foam cushion(32 density) covered with best quality tapestry cloth of rate not less than Rs 450 per mtr and not less than 300 GSM by weight.d) The wooden arms shall seprately provided with cushioned armrest made of 4mm thick plywood ,25mm thick PU foam cushion(32 density) covered with best quality tapestry cloth of rate not less than Rs 450 per mtr and not less than 300 GSM by weight and shall be fixed from bottom with wooden screws.e) PVC hard rubber ring of dia 25mm shall be provided to bottom of each leg with 20mm long screws.d) Rest all parts and dmensions are as per drg FINISH:-All wooden surfaces shall be polished in high gloss melamine finish after preparation of surface with sand emery paper and applying putty.
8Chair Verandah ,Dwaring No- FD-359DIMENSION:The overall size of the chair shall not be less than 460mm wide,600mm deep and 355mm high jupto seat from ground level and over all height 760 mmDESCRIPTION:a) The frame of the chair verandah shall be made up of 20mm dia conduit pipe of wall thickness 1.6mm.b) Seat and back of the chair shall be woven with virgin plastic cane 4mm wide and 0.6 mm thick half round in true godrej pattern weighing not less than 6 gms in ten running meters. c) PVC hard rubber toes shall be provided to each leg of chair verandah.d) Rest all parts and dimensions are as per drg. FINISH:-The chair shall be dry powder coated in white after preparation of surface .
9Chair Writing Officers ,Dwaring No- FD/E6/MAP/12The frame of the chair shall be of MS tubular frame powder coated ,cantilever type of size 25mmx10mm in section. Back form shall be designed with contoured lumber support for extra comfort.120mm thick hot pressed plywood upholstered with superior quality fabric and moulded polyurethane foam with PVC lipping all-round shall be provided at seat and back.PU arms shall be of superior quality and reinforced with MS insert.It shall be scratch and wheather resistant..Steel portion of chair shall be duly epoxy powder coated in black colour with Grade C standards as per IS13871: 1993 alongwith preparation of surfaces . Rest all specifications are as per drg and directed by Engr-In-Charge. Make of cushion - Kurlon/Sleepwell/MM Foam. Rest all as specified/shown on drawing and as directed by Engineer incharge.
10Chair Dining Officers ,Dwaring No- FD/MAP-II/04Overall size shall be 950mm high,450mm wide and 450mm deep.The size of the legs shall be 40x50mm .Front and side rails shall be of size 25x65mm.Stiifeners of size 20mmx25mm three in nos shall be fixed as specified in drg..75x75x25 teak wood stopper shall be fixed with main frame and legs four nos each in every corner for the support of the cushion and seat ply 75mm thick 40 density cushion of approved foam(Kurlon/sleepwell/MM Foam) covered with approved tapestry cloth shall be fixed over 12mm thick ply as specified in drg.Side frame of back of the chair shall be of section 40x50mm. Four teak wood vertical stiffeners of section 20x30mm shall be fixed in back of chair 25mm dia and 25mm high nylon buffers shall be provided to bottom of all legs.The curved teak wood back shall be of section 30x45mm. All sizes shall be taken as stated in specification, irrespective of what is shown on drg. All wood surfaces shall be lacquer polished with high gloss finish of walnut shade.Rest all as per drg. Make of BWR plywood - Century / Greenply / Duro.Rest all as specified/shown on drawing and as directed by Engineer incharge.
11Bed Hard ,Dwaring No- FD/E6/MAP/08(R) DIMENSIONS : 2050mm (L) x 900mm (W), height will be as per drawing. (a) Main Frame :- (i) Main frame pipe shall be 25 x 65mm rectangular MS pipe (18 Gauge wall thickness). (ii) Middle support shall be 25mm x 25mm Square MS pipe (18 Gauge, 04 Nos equal distance) in line with bottom of 25x65 mm section.(b) Top :- Top shall be 12 mm thick BWR phenol bonded commercial ply with edging unpolished placed on top of 25 x 25 mm Supports.(c) Head board and foot board :- (i) Frame work for head board and foot board including Legs shall be of 38 mm x 38mm Square MS pipe (18 Gauge wall thickness).(ii) Bottom stiffener on legs for head board shall be of 25 mm x 25mm square MS pipe (18 Gauge wall thickness). (iii) Frame for holdng pre-laminated MDF board exterior grade (one side natural teak finish decorative and other side white) shall be of 18 mm x 18 mm square MS pipe (18 Gauge wall thickness). (d) Pre laminated MDF board exterior grade fixed with screw on 20 x45 mm MS strip are welded to CR frame. (e) Rest all as per drawing. (f) Finish:- All iron surfaces shall be duly epoxy powder coated in Dark Brown colour with Grade C standards as per IS13871: 1993 alongwith preparation of surfaces as directed by Engineer-in-charge . Make of Prelaminated MDF board exterior grade - Century / Action Tesa / Green. Make of BWR plywood - Century / Greenply / Duro. Rest all as specified/shown on drawing and as directed by Engineer incharge.
12Rack Shoe Steel, Dwaring No -FD/E6/MAP/02(R)Size and shape of rack shoe steel shall be all as shown on drg. Main frame shall be 25 mm dia MS pipe 1.25mm (18 gauge) thick. 19mm dia MS pipe of 1.25mm (18 gauge)(Jali Frame work) welded to legs all as shown in drg. 3 mm dia MS rod – 03 Nos welded at equidistant as shown in drg. All steel members / surfaces shall be powder coated. Shoe rack shall be finished with powder coating in black colour with Grade C standards as per IS13871: 1993 alongwith preparation of surfaces . Rest all as specified/shown on drawing and as directed by Engineer incharge.
13Peg Table ,Dwaring No FD-384Overall size of peg table is 450mm(L) x 300mm(W) x 380mm (H) as shown in drg. All woodwork shall be be of Ist class teakwood of specie Tectona Grandis conforming to IS-1331:1971 free from dead knots and moisture content as permissible as per IS-287:1973. All timber frame work shall be Teak wood Grade - I. Table top shall be 18mm thick pre laminated MDF board exterior grade - I, One side Teak finish and other side balancing white lamination, exterior grade, conforming to IS-12823 with 4mm thick teak wood edging all around. as approved by GE and other side balancing white. All joint/fixing shall be done in accordance with standard workmanship. Teak wood edging 4 mm thick shall be provided alround the top as shown on drawing and as directed. All exposed surfaces of the timber shall be french polished except where painting is indicated on the drg. The unexposed surfaces shall be smoothened with sand paper. Legs shall be 30mm x 50 mm. The legs shall be 362mm high.5mmx5mm in section groove shall be provided on the top of legs which shall be visible when placed in position.Two nos top rails of section 20mmx40mm of teak wood shall be provided connecting legs.Two bottom rails of size 20mmx40mm shall be fixed between the legs. A centre stiffeners of size 20x40mm shall be provided at centre of side bottom rails for extra support irrespective of what is shown on drg. Leg shall be provided with hard rubber screw ring with CP MS screw All exposed surfaces shall be french polished. Hard PVC shoes four nos to be provided to four legs of peg table.Make of Prelaminated MDF board exterior grade- Century / Action Tesa / Green. Rest all as specified/shown on drawing and as directed by Engineer incharge.
14Table Writing ,Dwaring No- FD-275DIMENSION:Overall size shall be 1145mm long, 600mm wide and 760mm high.DESCRIPTION:All wood shall be of first class hard teak wood except top and right hand side drawer cabinet. Legs shall be of 35mmx55mm in section and 717mm high having 5mmx5mm in section groove at the top of legs at the portion when placed in position. The top shall be of 18mm thick prelaminated MDF board ext grade of approved shade and the edges shall be covered with 4mm thick teak wood beading. Two short stiffeners of teak wood of size 50mmx40mm in section irrespective of what is shown on drg shall be provided between legs at 100mm from bottom of legs. Sides of the box which house the drawer and cabinet shall be 18mm thick prelaminated MDF board ext grade exterior grade. Sides and back of drawers shall be of 12mm thick teak wood planks. Bottom of drawers shall be of 6 mm thick plywood commercial.6mm thick plywood commercial 75mm high partition shall be provided in the drawer. Shutter for cabinet shall be fixed with piano type continuous hinges. Lock shall be provided to drawer and shutters. Recessed handle shall be provided to drawer and shutter.25mm dia and 25mm high rubber shoes shall be fixed to bottom of legs. FINISH: All wood surfaces shall be French polished with high gloss finish. Make of Prelaminated MDF board exterior grade- Century / Action Tesa / Green. Make of BWR plywood - Century / Greenply / Duro. Rest all as specified/shown on drawing and as directed by Engineer incharge.
15Sofa set 04 seater, Dwaring No- FD-281DIMENSION :Overall size of one Seat shall be 670mm wide and 725 mm deep and 530mm high up to arm level.DESCRIPTION: a) All wood to be used shall be 1st class hard teak wood.b) The sofa set four seater shall consist of four single seats. c) 08 Nos of foam cushions to each set of each size 530mm x 560mm,100mm thick of 40 density covered with white lining cloth and best quality tapestry cloth of rate not less than 450 per mtr shall be provided with nylon zipper at one edge duly covered under the tapestry cloth flap.d) PVC hard rubber shoes of 25mm dia shall also be provided to bottom of each leg with 20mm long screws.Rest all specifications and dimensions are as per drg.FINISH:- All wooden surface shall be polished with high gloss Melamine polish in walnut shade after preparation of surfaces. .
16Table bed side MAP, Dwaring No- FD/E6/MAP/15RDIMENSION:The overall size of the table bed side 450mm x 450mm x 500mmDESCRIPTION:a) The frame shall be of 18mm square hollow pipe of 18 guage.b) Irrespective of what is shown on drg,It shall be made up of 18mm thick prelaminated MDF board.c) 4mm thick teak wood beading shall be fixed at all exposed edges with headless nails and adhesive.d) Sides and bottom of drawers shall be made up of 12mm thick prelaminated MDF board and front facia of drawers shall be of 18mm thick prelaminated MDF board , made to run on 2 x Nos of stainless steel telescopic channels.e) Both Drawers shall be provided with 100mm long 8mm dia chrome plated handles.f) The bottom of legs shall be provided with PVC buffers f) Rest all parts and dimensions are as per drg FINISH: All metal surface shall be dry powder coated in black after preparation of surfaces
17Table Dining 6 pers (1500mm x 900mm) Offr, Dwaring No- FD-273Overall Size 1500 mm x 900mm x 750 mm (H) for 6 persons as shown on drg. All woodwork shall be of Ist class teakwood of specie Tectona Grandis conforming to IS-1331:1971 free from dead knots and moisture content as permissible as per IS-287. All timber/ wood work to be checked and verified by the contractor prior to execution of work and veneered surfaces shall be french polished as specified except where painting is indicated in drg. The Dinning table for 6 persons shall be provided with two stiffener of the Table dinning as shown in drg. 6 mm thick Teak wood lipping shall be provided on all the exposed edge of MDF duly treated with French polish as specified irrespective of whatever shown in drg.18 mm thick both side pre-laminated MDF board Gde-I BWP type exterior quality of design as approved by GE as per IS-14587 shall be provided for top. Hard Wood stiffeners 90 x 25 mm shall be provided below table top using dove tail joint as shown in drg. 100mm x 100mm x 35 mm thick teak wood bracket shall be provided in all four corners of table dinning shall be provided. Teak wood legs 90 x 45 mm and rails 45 x 90 mm all round for top frame shall be provided as shown in drg. 150 x 30 x 5 mm thick MS right angle screwed with rail and legs for extra strength shall be provided as per drg. Teak wood beading 22 x 45 mm shall be provided at the edge of MDF Board top as shown in drgs. Nylon buffers shall be provided under all legs. 6mm thick TW lipping shall be provided on all the exposed edges of MDF Duly treated with French polish as specified. 25mm×25mm PVC shoes shall be provided at the bottom of the table. All joints and fixing, shall be done in accordance with the standard workmanship and all as shown on drawing. All timber / wood work shall be of well seasoned teak wood Gde-I. Rest all as shown on drgs. All wood surfaces exposed to view when placed in position shall given high gloss French polish with lacquer finish after preparation of surface with sand emery paper and applying putty. Make of Prelaminated MDF board exterior grade- Century / Action Tesa / Green. Rest all as specified/shown on drawing and as directed by Engineer incharge.
18Teapoy, Dwaring No FD-382DIMENSIONS : 600 length x 600 width x 450 height. RAW MATERIAL : Teak wood, Teak ply, Particle Board. MAIN FRAME :- 50 x 25 mm Teak wood Top :-18 mm thick pre-laminated MDF board Legs: 50mm x 30mm teak wood. FINISH : Fine teak polished. Make of Prelaminated MDF board exterior grade- Century / Action Tesa / Green. Rest all as specified/shown on drawing and as directed by Engineer incharge.
19Mirror Dressing Gents, Dwaring No- FD/E6/MAP/16DIMENSION :- Overall size shall be 1200mm high, 600mm wide and 100mm thick. DESCRIPTION:- (a) All wood to be used shall be 1st class hard teak wood. (b) It shall be made up of BWR plywood of grade-A of specified thickness as per drg in lieu of prelaminated particle board. (c) 1 mm thck laminated sheet shall be pasted on all exteriorsurface with marine grade adhesive including 6mm thck teak wood beading shall be provided around the edges of shutters and drawers. (d) Looking mirror shall be 5 mm thick fixed inside the teak wood frame made out of 38mm X 25mm section. (e) 03 X glass shelves of 5mm thickness shall be fixed inside the box with glass holders as shown in drg. Rest all specification and dimensions are as per drg. FINISH: All unlaminated plywood surface/wooden surface shall be polished in high gloss melmaine polish in walnut shade after preparation of surfaces.
20Receptacle PVC 20 Ltr, Dwaring No- FD/E6/MAP/13The body of receptacle PVC shall be made up of thick polymer plastic. It shall be of capacity 20 liters, provided with lid and handle as shown in drg. Rest all as specified/shown on drawing and as directed by Engineer incharge. Make - Cello/Milton/Supreme
21Ladder Aluminium, Dwaring No- FD-1025DIMENSION:Overall size shall be of 2310mm long and 363.5mm wide. DESCRIPTION: The ladder shall be of Aluminium having wall thickness 3.18mm. Each rung shall be of 23mm dia aluminium pipe with wall thickness not less than 2.43mm and shall be eight in nos at equidistant space of 300mm in between as shown in drg.The stringer of ladder shall be 31.75mm wide and 3.18mm thick. Each alumnium pipe rung of 23 mm dia shall be fitted inside the stringer with end bend to shape and each rung on both sides shall be provided with hard rubber cap. Hard rubber caps/shoes shall be fixed at the ends of aluminium rungs and stringers as shown on drawing with screws. Rest all as specified/shown on drawing and as directed by Engineer incharge.
22Dressing Table (Ladies) including Stool ,Dwaring No- FD/MAP-II/07The overall size of the table dressing shall be 1150mm long 380mm wide and 1700mm high. The sides, top ,back and front of the base unit shall be of 18mm thick prelaminated MDF board ext grade. The bottom of the side units shall be of 12mm thick commercial plywood. The sides and back drawers shall be of 12mm thick prelaminated MDF board ext grade, bottom of the drawers shall be of 6mm thick commercial ply whereas the front of the drawers shall be of 18mm thick prelaminated MDF board ext grade. 5mm thick electro copper plated mirror of polished sheet glass as specified shall be fixed over 6mm thick plywood back. The plywood shall be fixed on two vertical hardwood member of size 45mmx35mm .a horizontal support of size 30mmx20mm shall be provided in between two vertical members. The Overall size of the stool shall be 440mm long 350mm wide and 425mm high. The four sides shall be of 18mm thick prelaminated MDF ext grade.The top of the stool shall be of 12mm thick plywood openable as shown in drg.Four heavy duty revolving nylon double wheels shall be provided at base below the 6mm base ply fixed over wooden runner 20mmx20mm.The seat of the stool shall be 75mm high ,made of foam 40 density covered with tapestry cloth with febric having 400 to 500 therad count as approved by Engr-In-charge/GE.Rest all as per drg. Make of MDF board - Century / Action Tesa / Green. Make of plywood - Century / Greenply / Duro. Make of cushion-kurlon/sleepwell/MM Foam and make of glass - Modiguard/Saint Gobain. Rest all as specified/ shown on drawing and as directed by Engineer incharge.
23Charpoy Double Bunk, Dwaring No- FD-263DIMENSTION: Overall size of Double Bunk Bed shall be 1980 mm long, 900 mm wide and 1980 mm high.DESCRIPTION:(a) The frame of the double bunk bed shall be of 50 mm Square MS Pipe. The double bunk cot shall also consist of head board and footboard for upper anbd lower bearth.(b) The long rails of double bunk bed shall be provided at a distance 400mm from bottom of each leg and 450mm from top as shown in drg. The long rails of double bunk cot for upper and lower bearth shall be fixed with nylon insert nut and bolts of dia 18 mm and length 80mm over the corner supports welded to all four legs. The corner support shall be made of 5mm thck MS Sheet made to shape as shown in drg with arrangement for fixing nylon. Insert nut and bolts as per given size.(c) The headboard and footboard of upper and lower bearth shall consist of 03 equidistant vertical stifferners made of 30 mm MS Square pipe of length 420mm welded to 50mm short rail.(d) The upper and the lower bearth shall be provided with 05 Nos of centre supports made of 300 Sq MS ppipe welded to opposite long rails for providing extra support to top by welding.(e) The top of upper and lower bearth shall be of MS Sheet of 18 Guage welded althrough the edges with long/short rails and centre supports with proper grinding and smooth finish.(f) The upper bearth shall be provided with one side support of 400 mm high and 900mm long made of 30mm MS Conduit pipe having two internal vertical supports welded to top long rail at equal distance. Total in Figures 0.0 0.0 INR Zero Only Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information

AI Tender Summary

OUR REF NO 58260602
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 91.12 Lakhs
LAST DATE 26-11-2026
Authority
Authority Name Military Engineer Services
Work Description Tender For Special Repair Of Furniture Against Ber And Provn Of 105 X Double Bunk Beds At 629 Tpt Asc Under Ge(West) Delhi Cantt-10
Basic Detail
Tender No 8662/CWE/WEST/TKN-47/26-27/E8
Bidding Type Tender
Location
City New Delhi
State Delhi
Key Dates
Publish Date 29 Oct 2026
Submission Date 26 Nov 2026
Open Date 27 Nov 2026
Finance
Tender Value 91.12 Lakhs
Tender Fee 1000
EMD 1.61 Lakhs
Exemption Available
Document List
9a7cc13e-f276-4cb6-a62f-71bde67995a0.html
BOQ_892953.xls
tender.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Oct 29, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Nov 26, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 4 days
Nov 27, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 5 days

Tender Documents

Download All (ZIP) ↓
html

9a7cc13e-f276-4cb6-a62f-71bde67995a0.html

xls

BOQ_892953.xls

pdf

tender.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender