Tender For Special Repair To Bldg No P-19 And T-124 At Drugmulla Grn Under Ge 874 Ews
Tender Value
65.50 Lakhs
Estimated cost
Bid Submission
25 Nov 2026
23 days left
EMD
1.23 Lakhs
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Baramulla → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repair To Bldg No P-19 And T-124 At Drugmulla Grn Under Ge 874 Ews
BOQ
| Sl. No. | Item Description |
| 1 | Demolition of unreinforcement cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed. |
| 2 | M&L 75 mm thick PCC 1:3:6, type C-2 (using 20 mm graded crushed stone aggregate) as in plinth protection finished even and fair without using extra cement complete all as specified and directed. |
| 3 | S&F for glass dividing strips, 3 mm thick ,38 mm wide complete all as specified and directed. |
| 4 | M&L for machine cut Kota stone flooring 20-25mm thick over and including 20mm thick cement screed 1: 6 base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed. |
| 5 | M&L for Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over and including 10mm thick rendering in cement mortar 1:4 complete all as specified & directed. |
| 6 | M&L non skid ceramic tiles 7 to 8 mm thick area of each tiles exc 0.18 sqm but not exc 0.36 sqm, laid in floors etc., set and jointed in neat cement slurry and pointed in white cement to match the shade of tile laid over and including 15mm thick bedding layer in cement mortar 1:6 including necessary cutting and waste as per site requirement, Including dismantling floor, hearth or wall tilling including cement mortar bedding removing serviceable tile to rubbish of the premises complete all as specified and directed by Engineer-in-Charge. |
| 7 | M&L for non - skid ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, over and including 15mm thick rendering in cement mortar 1:6, Including dismantling floor ,hearth or wall tilling including cement mortar bedding removing serviceable tile to rubbish of the premises complete all as specified & directed. |
| 8 | M&L for glazed ceramic coloured tiles (600mm x 300mm and 7mm) thick, as in vertical surface such as in skirting and dado etc., set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, over and including 10mm thick rendering in cement mortar 1:4, including dismantling floor, hearth or wall tilling including cement mortar bedding removing serviceable tile to rubbish of the premises complete all as specified & directed. |
| 9 | S&F vitrified ceramic tiles light shade approved quality10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors and skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement over and including 15 thick screed mortar in cement mortar 1:6, including dismantling floor, hearth or wall tilling including cement mortar bedding removing serviceable tile to rubbish of the premises complete all as specified and directed. |
| 10 | M&L pergo tiles the surface board, Kiln seasoned imported maple wood surface board finished with 21 mm thick, 55 to 85 mm width and in random length in tongue and groove shape. The edges of the boards will have a finger lock grove and the bottom side with air pass groove. The Under Frame : Made of Commercial quality Fir/Spruce/Pine wood runners of 70 mm x 45 mm treated with anti - termite solution and fixed on the bottom side with 10 mm thick EPDM air cushioning pads by nails through the two wings at 350 mm c/c.The Installation :Avapro barrier will be placed on the levelled IPS sub floor before laying the under Frame. The runners having air cell cushioning pads will be placed on the vapour barrier in perfect level at 350 mm c/c in one direction. The surface boards will be screwed to the runners through the tongue only and will lock the screwed tongue by the groove of the adjoining boards. The ends of the boards will be locked by inserting the wooden fingers through the edge grooves and fixed with suitable adhesive. An expansion gap to 8 to 10 mm will be left open between the wooden flooring and the surrounding tiled area/wall. The finishing :after installation the floor will be machine sanded with floor sander machine and finished with Polyurethane lacquer. The game line marking to be carried out in required colours before applying the finish coat including dismantling of old unserviceable Pergo tile complete all as specified and directed. |
| 11 | M&L for chequered cement concrete tiles 20cm x 20cm x 25mm thick, with grey pigment cement and pigment set, jointed and pointed in neat cement slurry in floors over and including 15 mm thick screed bed in cement mortar 1 :4, including dismantling floor, hearth or wall tilling including cement mortar bedding removing serviceable tile to rubbish of the premises complete all as specified and directed. |
| 12 | M&L for 50 mm thick PCC 1:2:4, type B-0 (using 12.50 mm graded stone aggregate) for floor complete all as specified and directed. |
| 13 | M&L for providing & fixing false ceiling at all heights with GRG (Glass Fibre With Semi or fully Reinforced Gypsum) false ceiling tiles of perforated 12mm thick and size 595 x 595 mm of approved texture, design and patterns having moisture micro tabular edged or 10 mm content less than 2%, humidity resistance edged GRG thick square edged of 99%, NRC0.50 to 0.75 as per IS false ceiling GRG false ceiling 8225:1987, Non-combustible as per BS tiles tiles 4 76 (part 4 )-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main- T runners of size 15 x 32 mm of length 3000mm,cross-T of size 15x 32mm of length 1200mm and secondary intermediate cross-T of size 15 x 32 mm of length 600mm to form grid module of size 600x 600mm, suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e. 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1 mm length and L shape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x 24x0.40mm of length 3000 mm to be fixed on periphery wall I partition with the help of plastic rawl plugs at 450 mm centre to centre and 40mm long dry wall wood screws, including dismantling wall and ceiling boards or insulation boards/slabs/blankets, any thickness including cover fillet. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in- Charge. |
| 14 | M&L second class soft wood in scantling clean swan, including dismantling timber scantling 40 Sqcm and over in section in any position in unframed work complete all as specified and directed. |
| 15 | M&L plywood grade BWR type BB, 9 mm thick fixed with nails to timber frame work in ceiling, including dismantling wall and ceiling boards or insulation boards/slabs/blankets, any thickness including cover fillet complete all as specified and directed. |
| 16 | M&L plain fillets 2nd class soft wood of exc. 3 & n exc. 6 Sqcm, square rectangular or triangular in section , clean swan, secured nails complete all as specified and directed. |
| 17 | M&L for preparation of newly un treated surfaces and applying two coats of synthetic enamel paint on wooden surfaces of any description not other wise described over 10 cm width or girth etc. complete all as specified and directed. |
| 18 | Taking down chowkhats with shutters exc.1.5 Sqm but n exc.4 Sqm (without taking off shutters from chowkhats), complete all as specified and directed. |
| 19 | Taking down chowkhats with shutters n. exc.1.5Sqm (without taking off shutters from chowkhats), complete all as specified and directed. |
| 20 | S&F 2nd class soft wood plain solid straight chowkhats and frames wrought framed, rebated on the solid all as specified. |
| 21 | S&F plain, framed, panelled shutters second class soft wood 35 mm thick (any number of panels), with panels of timber flat on both sides(feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers, supplied and fitted to chowkhats complete all as specified and directed. |
| 22 | S&F glazed and skeleton shutters, second class soft wood 30 mm thick open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc. sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkhats complete all as specified and directed. |
| 23 | M&L for preparation of old painted surfaces and applying one coat of synthetic enamel paint on wooden surfaces of any description not other wise described over 10 cm width or girth etc. complete all as specified and directed. |
| 24 | S&F factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, frame at site as per specification & drawing complete all as specified and directed. |
| 25 | S&F solid PVC frame (Single Rebated) of size 60mm x 30mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffener and fixed with 100mm x 8mm sheet metal CSK screws complete all as specified and as shown on drawing. Note :- Door frame shall be water proof, termite proof, elegant and shall have excellent screws holding strength to fix hinges and hold doors properly for a long life. |
| 26 | S&F 100 mm size mild steel butt hinges medium weight complete all as specified and directed. |
| 27 | S&F 75 mm size mild steel butt hinges medium weight complete all as specified and directed. |
| 28 | S&F 150mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and directed. . |
| 29 | S&F 100 mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and as directed. |
| 30 | S&F aluminium anodised alloy handles fabricated type 150mm size complete all as specified and directed. |
| 31 | S&F 100 mm long aluminium handles cast type anodised complete all as specified and directed. . |
| 32 | S&F 300mm long aluminium alloy, anodised sliding door bolt, with hasp and staple (bolt type) cast or extruded section and fixing bolts of extruded section complete all as specified and directed. |
| 33 | S&F in repair for 03 mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq.m in each pane, including hacking out old broken glass (any thickness, size quality of description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beds complete all as specified. |
| 34 | S&F in repair for stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 35 | S&F in repair for vitreous China urinals, bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, fixing automatic flushing cistern with brackets, flush pipe, grating and union for discharge pipe. including of fixing supply pipe to flushing cistern, trap and waste pipe complete all as specified and directed. |
| 36 | S&F in repair for vitreous China wash basin, fancy bowl flat back size 550 x 400 mm including waste pipe and coupling 32mm for basins, etc. with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed including MS brackets& waste pipe complete all as specified and directed. |
| 37 | S&F in repair for vitreous China squatting pan 'Orissa' pattern size 580x440mm white with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and to flushing system anti syphon age pipe etc. complete all as specified and directed. |
| 38 | S&F in repairs Vitreous China premium/ 1st quality wash down water closet wall hung EWC white/ ivory/off white (closed pattern incl all necessary accessories like rag bolts/ gel gasket etc. (excluding flushing cistern & flush pipe) complete all as specified and directed. |
| 39 | S&F in repair health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 m long tube complete all as specified and directed. |
| 40 | S&F in repair for PVC valveless, syphonic action type, low level PVC flushing cistern 10 litre capacity white with flush pipe & all fitting complete all as specified and directed. |
| 41 | S&F in repair for Bib taps cast copper alloy ,chromium plated, with crutch or butterfly handle screwed down screwed for iron pipe or brass ferrule of 15mm bore, complete all as specified and directed. |
| 42 | S&F in repair for Pillar tap cast copper alloy, fancy type with capstan heads chromium plated screwed down with high pressure with or without lettered hot or cold with long screwed, shanks and fly nuts screwed for iron pipe 15mm dia complete all as specified and directed. |
| 43 | S&F in repair 20 mm gun-metal, globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 44 | S&F in repair ball brass valve, with polyethylene float and fly nut complete screwed down for iron pipe of 20 mm dia complete all as specified and directed. |
| 45 | S&F in repair 15mm bore stop/Angle valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed by Engr-in-Charge. |
| 46 | S&F in repairs two way angular stop cock chromium plated 15mm dia complete all as specified and as directed by Engr-in-Charge. Make : Cera/Jaquar/Essco or its equivalent. |
| 47 | S&F in repair soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed. |
| 48 | S&F in repair PVC connection 15mm dia and 600mm long with PTMT nuts and washer complete all as specified and directed. |
| 49 | S&F in repair PVC connection 15 mm dia and 450 mm long with PTMT nuts and washer complete all as specified and directed. |
| 50 | S&F in repair GI tube 15 mm dia medium grade galvanised with all fittings laid in floors /wall etc. including taking up or down 15mm dia GI steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed. |
| 51 | S&F in repair GI tube 20 mm dia medium grade galvanised with all fittings laid in floors /wall etc. including taking up or down 20mm dia GI steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and directed. |
| 52 | S&F in repair lagging to 15mm bore pipes used in internal water supply or plumbing all round with, 25mm thick bonded mineral wool preformed 'SNAPON' pipe section of density 144 Kg \cum conforming to IS 9842 alongwith chicken mesh wire netting 25 gauge , 20 mm mesh fixed complete all as specified and directed. |
| 53 | All as per ser item No 52 here-in-before but 20mm bore pipe complete all as specified and directed. . |
| 54 | S&F in repair 600 x 450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plug with chromium plated brass screws and cup washers complete all as specified and directed. Please Enable Macros to View BoQ information |
| 55 | S&F in repair 600 x 450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plug with chromium plated brass screws and cup washers complete all as specified and directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 29, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 25, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 23 daysDec 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 31 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender