Tender For Comprehensive Repair Of Various Bldgs Like Damaged Floor, Wall Tiles, Joinery Sunken, Sanitry Fittings, Plumbing Works, Cleaning Of Water Tanks And Allied Works In Kv Area/10 Afh Area And Arjan Area At Afs Hasimara
Tender Value
30 Lakhs
Estimated cost
Bid Submission
12 Nov 2026
12 days left
EMD
60000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jalpaiguri → West Bengal
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Comprehensive Repair Of Various Bldgs Like Damaged Floor, Wall Tiles, Joinery Sunken, Sanitry Fittings, Plumbing Works, Cleaning Of Water Tanks And Allied Works In Kv Area/10 Afh Area And Arjan Area At Afs Hasimara
BOQ
| Sl. No. | Item Description |
| 1 | Item Rate BoQ BoQ_Ver4.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority:GE (AF) HASIMARA Name of Work : COMPREHENSIVE REPAIR OF VARIOUS BLDGS LIKE DAMAGED FLOOR, WALL TILES, JOINERY SUNKEN, SANITRY FITTINGS, PLUMBING WORKS, CLEANING OF WATER TANKS AND ALLIED WORKS IN KV AREA/10 AFH AREA AND ARJAN AREA AT AFS HASIMARA Contract No: GE/HAS/ /2026-27 Name of the Bidder/ Bidding Firm / Company : PRICE SCHEDULE 'A' (BoQ)(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Sl.No. Description of Item Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT Without Taxes TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words |
| 2 | Taking down cement plaster of any description any thickness incl racking out joints hacking for keys scrubbing down with water etc, including disposal of debris and rubbish to a distance not exceeding 100m, complete all as specified and directed. |
| 3 | M&L 15mm thick rendering in CM (1:6) on fair faces of brick work or concrete surfaces finished surfaces even and smooth without using extra cement, complete all as specified and directed. |
| 4 | M & L for rendering 15mm thick in two coats (10mm under layer + 5mm top layer) on fair faces of brick work or concrete surfaces of wall in CM (1:4), mixed with water proofing compound on top layer as per manufacturer's instructions, finished the surface even and fair without using extra cement, complete all as specified and directed. (Note : WPC shall be measured and paid separately as 'supply only'.) |
| 5 | Supply only liquid water proofing compound conforming to IS: 2645 - 1975 specification, complete all as directed. |
| 6 | M&L 5mm thick rendering in CM (1:3) on ceiling surfaces finished even and smooth without using extra cement, complete all as specified and directed. |
| 7 | M&L for preparation of newly plastered surfaces of ceiling and applying three coat of white wash, complete all as specified and directed. |
| 8 | M&L for preparation of newly plastered surfaces of wall and applying three coat of white wash, complete all as specified and directed. |
| 9 | M&L for preparation of newly plastered surfaces of wall and applying two coats of oil bound distemper over a coat of chalk whitening, complete all as specified and directed. |
| 10 | M&L for preparation of newly plastered surfaces of wall and applying two coats of cement base paint over a coat of alkali resistance primer, complete all as specified and directed. |
| 11 | M&L for preparation of old decorated surfaces of wall by brooming down or steel wire brushing, scrapping down smoke soot, moulds moss and fluorescent salts and trading oil and greasing spots and applying one coat of oil bound distemper including cornics, plasters etc, complete all as specified and directed. |
| 12 | M&L for complete removal of existing treatment of old decorated surfaces of wall/chajja cornices, pilasters etc. including washing rubbing down and scrapping smoke soot moulds, moss and greasing sports with steel wire brush and applying two coats oil bound distemper, complete all as specified and directed. |
| 13 | M&L for preparation of old decorated surfaces of wall/chajja including brooming down or steel wire brushing, scraping down smoke shoot etc and applying one coat of cement base paint, complete all as specified and as directed. |
| 14 | M&L for complete removal of existing treatment of old decorated surfaces of wall/chajja including washing rubbing down and scrapping smoke soot moulds, moss and greasing sports with steel wire brush and applying two coat of cement base paint, complete all as specified and as directed. |
| 15 | M&L for preparation of old painted surfaces of wood or wood based material and applying one coat of synthetic enamel paint (1st grade quality) on surface of any description over 10cm width or girth, complete all as specified and directed. |
| 16 | M&L for preparation old painted steel or iron surfaces of any description, not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint (1st grade quality), complete all as specified and directed. |
| 17 | M&L for complete removal of existing treatment of old painted steel or iron surfaces of any description, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint (1st grade quality), complete all as specified and directed. |
| 18 | Dismantling of floor, hearth or wall tiles including cement mortar bedding (but not backing) and remvoing serviceable tiles to store and rubbish off the premishes, complete all as specified and directed. |
| 19 | M&L for glazed ceramic coloured tiles in vertical surface 350 x 250 x 7mm / 450 x 300 x 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of the tiles, over and including 10mm thick rendering as back coat in CM (1:4), complete all as specified and directed. |
| 20 | M&L for non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement of match the surfaces over and including 15mm thick screed bed in CM (1:6), complete all as specified and directed. |
| 21 | M&L for vitrified ceramic coloured tiles 10mm thick (square/rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement of match the surfaces over and including 15mm thick screed bed in CM (1:4), complete all as specified and directed. |
| 22 | M&L for vitrified ceramic coloured tiles 10mm thick (square/rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement of match the surfaces over and including 10mm thick rendering as backing coat in CM (1:3), complete all as specified and directed. |
| 23 | S&F in repair vitreous china squatting pan, ‘Orissa’ pattern, size 580 x 440mm white, with integral foot rests (excluding flushing cistern and flush pipe) incl \\"P\\" or \\"S\\" trap, including connection to trap and to flushing pipe, anti syphonage pipe etc. including provision of lime concrete bedding, complete all as specified and directed. |
| 24 | S&F in repair vitreous china EWC (padestal pattern) white including plastic seat cover of same colour of WC, of closed pattern with flat bottom with mild steel chromium plated hinging device and flush pipe, complete all as specified and as directed. |
| 25 | S&F in repair PVC (SWR) floor trap, plain with grating including jointing with solvent cement, dia of outlet 75mm, complete all as specified and directed. |
| 26 | M&L for PVC(SWR) gully trap 125/110mm, setting and jointing with solvent cement, complete all as specified and directed. |
| 27 | S & F in repair cast iron nahani trap 75mm dia with grating including jointing to waste pipe fixed in CM (1:2:4) type B1 (using 20mm graded crushed stone aggregate), complete all as specified and as directed. |
| 28 | S & F in repair cast iron nahani trap 100mm dia with grating including jointing to waste pipe fixed in CM (1:2:4) type B1 (using 20mm graded crushed stone aggregate), complete all as specified and as directed. |
| 29 | S&F in repair 10 Liters capacity, low level flusing cistern, PVC, white, with inlet ball valve, float, handle, 32mm dia flush pipe of polyethylene of low or high density or PVC, including brackets and connection to pipe, complete all as specified and directed. |
| 30 | S & F in repairs, 15mm bore, PVC connection pipe 450mm long with PTMT nuts at both ends, complete all as specified and directed. |
| 31 | S&F of 110mm bore size, PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls including dismantling of old unserviceable pipes and fittings, complete all as specified and directed. |
| 32 | S&F of 75mm bore size, PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls including dismantling of old unserviceable pipes and fittings, complete all as specified and directed. |
| 33 | S&F 110mm bore, PVC (SWR) bends of any radius, complete all as specified and directed. |
| 34 | S&F 75mm bore, PVC (SWR) bends of any radius, complete all as specified and directed. |
| 35 | S&F 110mm PVC (SWR) junction single, (Single T) equal or unequal, complete all as specified and directed. |
| 36 | S&F 110mm PVC (SWR) branch piece, (Single Y) equal or unequal, complete all as specified and directed. |
| 37 | Taking down 15mm bore steel water tubing and connection from wall /ceiling surfaces including cleaning for re-fixing or removing from site of work, complete all as specified and directed. |
| 38 | Taking down 15mm bore steel water tubing and connection from wall /ceiling in concealed position including cleaning for re-fixing or removing from site of work, complete all as specified and directed. |
| 39 | Re-fixing old steel tubing and connection, 15mm bore, in new or old position with new fittings, complete on wall/ceiling, complete all as specified and directed.(Note : Serviceable steel tube obtained from taking down shall be re-used) |
| 40 | S&F steel water tubing and connection, medium grade, 15mm bore with all fitting fixed concealed to wall or in ceiling complete and making good surfaces with CM (1:3), complete all as specified and directed. |
| 41 | S&F steel water tubing and connection medium grade 15mm bore with all fitting fixed to wall or in ceiling, complete all as specified and directed. |
| 42 | Taking down 20mm bore steel water tubing and connection from wall /ceiling surfaces including cleaning for re-fixing or removing from site of work, complete all as specified and directed. |
| 43 | S&F steel water tubing and connection, medium grade, 20mm bore with all fitting fixed to wall or in ceiling, complete all as specified and directed. |
| 44 | Re-fixing old steel tubing and connection 20mm bore in new or old position with new fittings, complete on wall/ceiling, complete all as specified and directed.(Note : Serviceable steel tube obtained from taking down shall be re-used) |
| 45 | S&F in repair 15mm bore, fancy type, chromium plated, stop valves, concealed type, with long shank and cup, cast copper alloy screwed down high pressure screwed both ends for iron pipe or union, complete all as specified and directed. |
| 46 | S&F in repair 15mm bore angular stop cock, cast copper alloy, screwed down, high presure with crutch or butterfly handle screwed both ends for iron pipe or union, complete all as specified and directed. |
| 47 | S&F in repairs of 15mm bore bib taps, cast copper alloy with chromium plated, fancy type, screwed down, screwed for iron pipe or for brass ferrule, compelete all as specified and directed. |
| 48 | S&F in repair shower rose 125mm size, brass, chromium plated, with or without swivel joints, including fixing to steel pipe or union, complete all as specified and directed. |
| 49 | S&F in repair vitreous china ware wash hand basin white, flat back, size 550 x 400mm size (flat back or angle back type) including PVC waste pipe 32mm dia, waste coupling including cutting for and pinning ends of brackets or erecting stand including pedestal, complete all as specified. |
| 50 | S&F in repair CP pillar tap, 15mm bore, capstan head, screwed down high pressure with or without lettered “hot’ or “ cold” with long screwed shanks and fly nuts screwed for iron pipe, complete all as specified and directed. |
| 51 | S&F in repair 32mm size PVC flexible waste pipe for wash hand basin, 800mm to 900mm long, complete all as specified and directed. |
| 52 | S&F in repair 40mm size PVC flexible waste pipe for sink, 800mm to 900mm long, complete all as specified and directed. |
| 53 | S&F in repair 600mm x 450mm bevelled edge mirror made of selected quality sheet glass not less than 5.5mm thick, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers, complete all as specified and directed. |
| 54 | S&F in repair health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.00 metre long flexible tube and ABS wall hook including making connections and fixed in position, complete all as specified and directed. |
| 55 | S&F in repair sinks made of stainless steel with draining board, 1mm thick (SS-304) with plugs and wastes including in cement mortar onto dwart wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mmx160mm including waste pipe & coupling 32mm, complete all as specified and directed. |
| 56 | S&F in repair sinks made of stainless steel without draining board, 1mm thick (SS-304) with plugs and wastes including in cement mortar onto dwart wall or including fixing cantilever brackets and connecting union to pipe overall size 495mm x 410mm bowl size 410mm x 330mm x 160mm including waste pipe & coupling 32mm, complete all as specified and directed. |
| 57 | S&F in repair towel rail, 60cm long PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats (Minimum weight 190gms), complete all as specified and directed |
| 58 | S&F in repair 15mm bore, stop valves, chromium plated, fency type, cast copper alloy screwed down high pressure screwed both ends for iron pipe or union, complete all as specified and directed. |
| 59 | S&F in repair 20mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe or brass and fixed (wight not less than 210 gm), complete all as specified and directed. |
| 60 | S&F in repair tank cover suitable for rotational moulded polyethylene water storage tanks of any capacity, complete all as specified and directed. |
| 61 | S&F in repair 20mm bore gun metal globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified and directed. |
| 62 | S&F in repair 32mm waste coupling of PTMT (half or full threaded) suitable for WHB (minimum weight -45 gms), complete all as specified and directed. |
| 63 | S&F in repair 40mm waste coupling of PTMT suitable for kitchen sink (half or full threaded) (minimum weight -60 gms), complete all as specified and directed. |
| 64 | Cleaning and removing all scale and dirt etc, from tanks of capacity (exc. 250 & n. exc. 500 ltr), and from mouths of circulating pipes etc using edible bleaching powder/liquid and washing with water, writing the item \\"Tank Cleaned on dd/mm/yy\\" indicating the date, month & year of cleaning on external surface of tank walls with synthetic enamel paint, complete all as specified and directed. |
| 65 | Cleaning and removing all scale and dirt etc, from tanks of capacity (exc. 500 & n. exc. 1000 ltr), and from mouths of circulating pipes etc using edible bleaching powder/liquid and washing with water, writing the item \\"Tank Cleaned on dd/mm/yy\\" indicating the date, month & year of cleaning on external surface of tank walls with synthetic enamel paint, complete all as specified and directed. |
| 66 | S&F rotational moulded polyethylene (HDPE) water storage tanks, (made of 100% virgin and food grade plastic), triple layered, (cylindrical vertical with closed top) ISI marked, confirming to IS 12701-1996, hoisted and fixed in position all as specified in SSR Part I (500 ltr capacity) including 20mm Nipple suitable for HDPE water tank and 20mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe and fixed to 20mm bore pipe inculding taking down old unserviceable water tank of any capacity, complete all as specified and directed. |
| 67 | S&F rotational moulded polyethylene (HDPE) water storage tanks, (made of 100% virgin and food grade plastic), triple layered, (cylindrical vertical with closed top) ISI marked, confirming to IS 12701-1996, hoisted and fixed in position all as specified in SSR Part I (1000 ltr capacity) including 20mm Nipple suitable for HDPE water tank and 20mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe and fixed to 20mm bore pipe inculding taking down old unserviceable water tank of any capacity, complete all as specified and directed. |
| 68 | M&L for 4mm thick pre-painted E-fibre board, designer/decorative, fixed or laid/inserted to GI snap grid frame size 605mm x 605mm work for false ceiling hangers with 4mm to 6mm dia. G.I. (length as required) adjusting level, fixed to roof slabs/truss by means of ceilling cleats made out of G.I. flat 40 x 3mm size 60mm long and expansion hold fasteners, 12.5mm dia, 40mm long including necessary dismentaling of existing unserviceable ceiling boards of any thickness including cover fillets, complete all as specified and directed. |
| 69 | Taking down chowkhat with shutter (without taking off shutter from the frame) exc 1.5 Sqm but n.exc 4 Sqm each, complete all as specified and directed. |
| 70 | Taking down chowkhat with shutter (without taking off shutter from the frame) n.exc 1.5 Sqm each, complete all as specified and directed. |
| 71 | Taking down shutter of any description exc 1 & n. exc. 2 Sqm each, complete all as specified and directed. |
| 72 | Taking down shutter of any description n. exc 1 Sqm each and refixing in same opening, complete all as specified and directed. |
| 73 | Taking down shutter of any description exc. 1 Sqm but n. exc. 2 Sqm each and refixing in same opening, complete all as specified and directed. |
| 74 | Taking down shutter of any description n. exc. 1 Sqm each, complete all as specified and directed. |
| 75 | S&F 125 x 60mm size pressed steel door frames of doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, complete all as specified and directed. |
| 76 | S&F 105 x 60mm size pressed steel door frames of doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, complete all as specified and directed. |
| 77 | S&F 2nd class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and directed. |
| 78 | S & F factory made solid PVC door frame of size 50mm x 47mm made out of 5mm wood grain printed PVC sheet used instead of Plain colour PVC sheet & edges will be painted to match with printed sheet, complete all as specified and directed. |
| 79 | S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing, complete all as specified and directed. |
| 80 | S & F 35mm thick factory made second class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut mitred beads for securing glass etc, complete all as specified and directed. |
| 81 | M&L 35mm thick 2nd class hardwood factory made plain framed panelled shutter (two panel) with lock rail and panel of 9mm B.W.P commercial ply or 12mm veneered particale board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I) kiln seasoned and chemically pressure treated, complete all as specified and directed. |
| 82 | S&F factory made solid wire gauzed (i.e. panel will be of wire gauze) PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and single side prelam PVC sheet for top rail, lock rail & bottom rail on either side having one side feathered edge and on other side 10mm 900 bent edge & as gap insert for top rail & bottom rail, i.e. panel will be of wire gauge. The wire gauge shall be wrapped on an additional square 8mm M.S. solid tube and this tube shall be welded to M.S. tubes. The wire gauge shall be stretched to tighten firmly, complete all as specified and directed. |
| 83 | M&L for preparation of new or previously untreated wooden surfaces of any description not otherwise described, exc. 10cm width or girth and applying two coats of synthetic enamel paint (1st grade quality) over a coat of pink primer, complete all as specified and as directed. |
| 84 | S&F floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, overall length of cover plate 150mm, fixed on floor, complete all as specified and directed. |
| 85 | S&F of 30mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, complete all as specified and directed. |
| 86 | S&F 30mm thick (factory made), 2nd class hardwood, plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers, supplied and fitted to chowkats, complete all as specified and directed. |
| 87 | S&F in repair 2nd class hard wood boarding,15mm thick, clean sawn with butt joints fixed with nails in any situaion as shelves of built-in-cupboard including replace old and or decayed boarding in patches including cutting out old, piecing, heading joints, etc., complete all as specified and directed. |
| 88 | S&F 100mm size MS butt hinge, medium weight, cold rolled mild steel, complete all as specified and directed. |
| 89 | S&F 75mm size MS butt hinge, medium weight, cold rolled mild steel, complete all as specified and directed. |
| 90 | S&F butt hinges of size 100mm, extruded aluminium alloy with galvanised mild steel hinge pin, anodised, type B-21, complete all as specified and directed. |
| 91 | S&F 300mm aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, complete all as specified and directed. |
| 92 | S&F 250mm aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, complete all as specified and directed. |
| 93 | S&F 200mm long aluminium anodised, barrel tower bolt of extruded section, complete all as specified and directed. |
| 94 | S&F 150mm long aluminium anodised, barrel tower bolt of extruded section, complete all as specified and directed. |
| 95 | S&F 150mm long extruded aluminium alloy handle, fabricated type, anodised, complete all as specified and directed. |
| 96 | S&F 125mm long extruded aluminium alloy handle, fabricated type, anodised, complete all as specified and directed. |
| 97 | S&F in repair galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples, complete all as specified and directed. |
| 98 | S&F galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples, complete all as specified and directed. |
| 99 | S&F in repair 300mm, ordinary mild steel, rat tail, rod pattern springs including rooler and roller plate welded to mild steel frame, complete all as specified and directed. |
| 100 | S&F in repair 100mm hasp & staple safety type aluminium anodised with mild steel hing pin including bolt to hinge plate and fixed with screws, complete all as specified and directed. |
| 101 | S&F 100mm hasp & staple safety type aluminium anodised with mild steel hing pin including bolt to hinge plate and fixed with screws, complete all as specified and directed. |
| 102 | S & F in repair continuous (piano) hinges,mild steel, width of flap 30mm (when open) bright finish or electrogalvanised, complete all as specified and directed. |
| 103 | S & F in repair ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed, complete all as specified and directed. |
| 104 | S&F in repair door closer hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000mm in width of aluminium (Die cast) body, complete all as specified and directed. |
| 105 | Hacking out old broken glass any thickness size quality or description from metel frame/aluminium frame including punching or drilling our old glazing pins/spring clips, complete all as specified and directed. |
| 106 | M&L for sheet glass, 3mm thick, ordinary quality and glazing with oil putty in sqare n. exc. 0.5 sqm in each pane, complete all as specified and directed. |
| 107 | M&L for 3mm thick figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sqm in each pane, complete all as specified and directed. |
| 108 | Dismantling of plain or corrugated steel/galvalume sheeting any gauge thickness including nainital or similar pattern roof covering, complete all as specifed and directed. |
| 109 | S&F pre painted galvalume aluminium zinc coating, GI based corrugated steel sheet 0.50mm thick, of any colour, having tensile strength of 550 Mpa as in roof covering /cladding to wall fixed with self tapping screws, complete all as specified and directed. |
| 110 | Fixing only old prepainted corrugated galvalume sheet, as in roof covering/cladding, fixed with self tapping screws, complete all as specified and directed.(Note: Serviceable galvalume sheet obtained from dismantling shall be re-used) |
| 111 | S&F pre painted galvalume aluminium zinc coating, GI based plain steel sheet 0.50mm thick, of any colour, having tensile strength of 550 Mpa as in roof covering /cladding to wall fixed with self tapping screws, complete all as specified and directed. |
| 112 | S&F of galvanised, corrugated mild steel sheeting 0.63mm thick with two corrugations side lap, fixed with self tapping screws with rubber washers with grade of zinc coating 275, complete all as specified and directed. |
| 113 | Demolition of unreinforced cement concrete of any description and in any position not otherwise specifically provided for including dismantling existing tile flooring, skirting & fittings in sunken pertion removal of debris outside of MoD land, complete all as specified and directed. |
| 114 | M&L for PCC (1:5:10) type E-2, (using 40mm graded crushed stone aggregate) as in sunken portion, complete all as specified and directed. |
| 115 | M&L for 25mm thick PCC (1:2:4) type B- 0, (using 12.5mm graded crushed stone aggregate) as in sunken portion, complete all as specified and directed. |
| 116 | S&F stainless steel plate rack of size 24\\" x 30\\" x 10\\", made of 0.50mm thick (min) standard quality (SS-204) weight not less than 6 kg, fixed with brass screw, complete all as specified and directed. |
| 117 | S&F in repair 15mm dia Bib tap standard of PTMT any colour fixed high pressure screwed for iron pipe and fixed. (Minimum weight 190gms), complete all as specified and directed. |
| 118 | S&F in repair 15mm dia Pillar taps of PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight 110gms), complete all as specified and directed. |
| 119 | M &L PCC (1:2:4) type B-0 (using 12.5mm graded crushed stone aggregate) as in coping, bed plates, filling in MS pressed door/tank frame, hold fast blocks, fixing angle iron etc, including form work, complete all as specified and |
| 120 | S&F 18mm thick wooden grain PVC celuka ply fixed in shelves, partitions and shelves of built in cupboards, almirahs, book cases, toilet boxes, racks, pelmet and similar work fixed with screws/self tapping screws etc, complete including required accessory and builder hardware, complete all as specified and directed. |
| 121 | S&F 25mm thick wooden grain PVC celuka ply for shutters of built in cupboards, almirahs, book cases, toilet boxes, racks and kitchen cabinet and similar work fixed with screws/self tapping screws etc. including required accessory and builder hardware (steel handle, hasp & staple, magnet), complete all as specified and directed. |
| 122 | S&F 6mm thick plywood grade BWR type BB, fixed with nails to screws/timber frame work in any situation as AC ducts, openings etc. including dismantling of old unserveceable boarding of any description, complete all as specified and directed. |
| 123 | Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and as directed. |
| 124 | S&F steel windows with side hung shutters (ISI marked), factory fabricated including projecting type hinges with steel handle and steel peg stay complete with glazing bars, dovetailed or welded including making good the opening with necessary putty/plastering/painting required, complete all as specified and directed. |
| 125 | S&F steel windows with side hung shutters (ISI marked), factory fabricated including projecting type hinges with steel handle and steel peg stay complete without glazing bars, dovetailed or welded including making good the opening with necessary putty/plastering/ painting required, complete all as specified and directed. |
| 126 | S&F steel ventilator with top hung shutter (ISI marked), factory fabricated including hinges, steel peg stay including making good the opening with necessary putty/plastering/painting required, complete all as specified and directed. |
| 127 | S&F powder coated (minimum 50 micron) aluminium ventilator partially fixed with 5 mm thick selected quality glass and partially flaps openable section with weight of frame not less then 1.17 kg/RM including handle cleat,glazing clip special auto lock dry set rubber gasket and frame fixed with stainless steel wiremesh outside the ventilator including necessary aluminium fittings required for fixing the same including making good the opening with and necessary putty/plastering/painting, as required, complete all as specified and directed. |
| 128 | S&F powder coated (minimum 50 micron) aluminium windows shutter with frame comprising of 3 track sliding window made out of aluminium extruded section of bottom frame of weight not less than 1.174 Kg/Rm, top and side frame of weighing not less than 1.174 Kg/Rm, the vertical styles of shutters of weighing not less than 0.423 Kg/Rm, top and bottom rail of shutters of weiighing not less than 0.368 Kg/Rm, in two pannels and shutter with and including 5mm thick selected quality tinted glass & third one with and incl stainless steel wiremesh and overall aluminium decogrill as approved by GE, fixed with standard aluminium channel out side, with and including handles, cleat, glazing clip, special auto lock, dry set rubber gasket, complete all as specified and directed. |
| 129 | S&F in repair 25mm dia curtain rod, stainless steel, chromium plated with fixing brackets, stops, rollers etc, complete all as specified and directed. |
| 130 | M&L for preparation of new steel or iron surfaces of any description and exc. 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint (1st grade quality) over a coat of red oxide primer, complete all as specified and as directed. |
| 131 | M & L for complete removal of existing treatment of walls surfaces applying 1.5 to 2mm thick wall care putty to obtain a smooth surface including making good any undulations on the surfaces and applying two coats of oil bound distemper over the putty surfaces, complete all as specified and directed. |
| 132 | S&F in repair CP grating 100mm dia with or without waste hole, fixed to floor trap, complete all as specified and directed.. |
| 133 | M & L for water proofing treatment in sunken floors as described here under:- Sunken floor and sides up to finished floor level shall be plastered with 15 mm thick cement plaster in CM 1:4 mixed with water proofing liquid @ 150 ml per bag of cement . (ii) Preparing plastered surfaces and providing APP polymeric water proofing membrane , minimum 3 mm thick and weighing not less than 3.0 kg/ sqm of make super thermolay manufactured by STP ltd or Hyper Plas (Polyster) manufactured by M/S IWL Ltd or 'Shatiplas' ) Polyster) manufactured by M/S Capital Steels and chemicals Pvt Ltd as approved by GE, black finish reinforced with non-woven polyster matt, with a thermo fusable finish laid over compatible bitumen primer (Bitumen primer shall be TANK MASTIC of M/S STP Ltd or EMW Flate' of M/S Texas India Ltd) at the rate of 0.40 Ltr/Sqm torching overlaps with a propane or a butane gas torch , with a over lap of 75mm at the sides and 100mm at the ends sealing including applying a coat of cold emulsion bituminous primer all as per manufacturer's instructions including preparation of surface by removing the existing treatment, complete all as specified an directed. Note :- (i) Polymeric membrane shall be laid in sunken floor and on sides up to finished floor level. (ii) The waterproofing treatment shall be got carried out by the manufacturer or their authorised applicators. (iii) Above aspects are deemed to be included in quoted rate. (iv) Water proofing liquid shall be measured and paid seperately as 'Supply only'. |
| 134 | M&L for granite (of any type) tiles 18-20mm thick machine cut, in skirting/dado laid over cement screed and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete, over and including rendering 10mm thick in CM (1:3) as backing coat, complete all as specified and directed. |
| 135 | Demolition of reinforced cement concrete(reinforcement cut as required to facilate demolition) of any description disposal unserviceable materials, debris and rubbish to a distance n. exc. 100m, complete all as specified and directed. |
| 136 | M&L for mild steel framed work such as grill, gratings etc with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barrel iron doors, ladders framed balusters, walks railings, frame work of water tanks and similar work conforming to E-165 (Fe-290) including two coats of synthetic enamel paint over one coat of red oxide, complete all as specified and directed. |
| 137 | M&L for post construction antitermite treatment by injecting chemical of anti termite treatment along with external wall below concrete or machinery apron/floor using chemical emulsion (ATT chemical) @ 2.25 ltr/RM including drilling and plugging holes etc, complete all as specified and directed. |
| 138 | M&L for post construction antitermite treatment of soil under existing floor using chemical emulsion (ATT chemical) @ 1.00 ltr/hole, 300mm dia apart including drilling and plugging 12mm dia holes with CM (1:2) to match with the existing floor, complete all as specified and directed. |
| 139 | M&L for post construction antitermite treatment at point of contact of wood work by chemical emulsion (ATT chemical) (in oil or kerosene bases solution) @ 0.50ltr/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same, complete all as specified and directed. |
| 140 | M&L for 75mm thick PCC (1:3:6) type C1 (using 20mm graded crushed stone aggregate) as in plinth protection laid in alternate bays (n. exc. 2 Sqm each) and finished even and smooth without using extra cement and providing joints troughout the thickness of the plinth protection filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight, complete all as specified and directed. |
| 141 | Taking out old damaged tarfelt or membran of any description including screed bed or bedding layer and removing of debris to a distance exc. 50m and n. exc. 100m and cleaning roof surfaces to remove all loose dust etc., roughening surfaces of old concrete roof by picking, sweeping clean and washing down with water using wire brush, brooming down and applying the following treatment all as directed in order of precedence as stated:(a) Brushing neat cement slury with 3.0 kg of cement per Sqm.(b) 15mm thick screed bed or bedding layer in CM (1:4) mixed with water proofing compound as per manufacturer instruction on existing roof surface true to level.(c) Applying one coat of bituminous primer @ 0.40 Ltr/Sqm. (d) Supply and laying 3mm thick APP based polymeric membrane of approved manufactured with weight not less than 3.50 Kgs per Sqm reinforced with non-woven polyester fabric weighing not less than 160gms per Sqm having softening point not less than 15°C, having tensile strength of 650 N/Sqcm and 350 N/Sqcm in longitudinal and transverse directions respectively of the reinforced tearing strength of 180 N by torch application. Polymeric membrane shall be taken to a height of 30cm (minimum) and then inserted inside the groove of parapet wall and shall be finished by a membrane flashing. (e) Applying one coat of aluminium paint @ 0.11 Kg/Sgm over APP membrane surface. Note:- (i) Laying APP based polymeric membrane shall be done torch on method as per manufactures instructions.(ii) A minimum overlap of 150mm and 100mm should be made at the end and sides of the polymeric membrane respectively and sealed all overlaps and joints as per manufacturers instruction.(iii) APP based polymeric membrane shall be of any one of the approved makes as specified here-in-after and shall conform to specifications given in IS 16540-2017/1S 16532 2017.(iv) Contractor shall produce necessary test certificate of the manufacturer to the Engr-in-Charge before incorporation in the work. (v) Necessary independent tests shall also be carried out by the contractor without any extra cost to the Deptt as per relevant IS specifications and membranes with satisfactory test results shall only be incorporated in the work.(vi) The work shall be executed through authorised applicators of original manufacturer only.(viI) WPC shall bemeasured and paid separately as 'supply only'. |
| 142 | S&F for roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, channel or flat sections) including distance pieces, cleats Fe 410W (Gde E-250) complete all as specified and as directed. |
| 143 | Note: An amount of Rs.63,386.00 on account of Credit Schedule for schedule 'A' part - II shall be deducted from the total amount of BOQ to arrive at the contract sum. Total in Figures 0.0 0.0 INR Zero Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 29, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 12, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysNov 14, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 14 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender