Tender For Provn Of Polypropylene Interlocking Sports Flooring Near Bldg No B-11 At Chanakyabagh And Addn/ Altn Of Compound Wall And Installation/ Fitment Of Barbered Fencing At Ncs Under Ge New Delhi
Tender Value
Ref. Documents
Estimated cost
Bid Submission
17 Nov 2026
16 days left
EMD
96997
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
New Delhi → Delhi
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Provn Of Polypropylene Interlocking Sports Flooring Near Bldg No B-11 At Chanakyabagh And Addn/ Altn Of Compound Wall And Installation/ Fitment Of Barbered Fencing At Ncs Under Ge New Delhi
BOQ
| Sl. No. | Item Description |
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority : GE NEW DELHI Name of Work: PROVN OF POLYPROPYLENE INTERLOCKING SPORTS FLOORING NEAR BLDG NO B-11 AT CHANAKYABAGH AND ADDN/ ALTN OF COMPOUND WALL AND INSTALLATION/ FITMENT OF BARBERED FENCING AT NCS UNDER GE NEW DELHI Contract No: GE/ND-66/2026-27 Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Rates only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Sch. itemNo. Item Description Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency RATE In Rs. Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words |
| 2 | M&L for providing and fixing Polypropylene (PP) Interlocking sports Flooring (ITF approved) made of high impact resistant tiles including surface preparation, intelocking of tiles and edge finishing. The tiles shall be of size 300mm x 300mm with a thickness of 15-16mm, featuring an anti slip surface and specialized design for efficient water drainage, work includes laying the tiles on a prepared base without the use of adhesive ensuring consistent performance, high impact resilience and durability, The tiles shall be in standard colour (Red, Blur or Green) as specified, being non fading and easy to maintain. All work to be completed as per manufacturer specification and as directed including necessary border strips and expansion joints for a complete functional court surface (Rates are inclusive of surface preparation as well as any other requirement as per execution of work, nothing extra will be paid on this account) complete all as specified and directed.Make: Guardwe/ Enlio Sports/ Sportile/ Fitflex |
| 3 | Excavating in trenches not exceeding 1.5 m wide and not exceeding 1.5m in depth etc not exceeding 10 Sqm on plan for shafts, cesspits, manholes pier holes, foundation etc and getting out in hard/dense soil incl removing the unserviceable material out side the MOD land upto 1.5 Km complete all as specified and directed. |
| 4 | M&L for returning, filling in, includingspreading, levelling, wateringand well ramming in layers not exc 25 cm on soft/loose soil complete all as specified and directed. |
| 5 | Removing excavated material exc. 1.50 km but n exc. 5 km and depositing out side the MOD land complete all as specified and directed. |
| 6 | M&L for cement concrete 1:4:8 type D2 (using 40 mm graded aggregate) as in foundation filling and mass concrete complete all as specified and directed. |
| 7 | M&L for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending, spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed by Engr-in-Charge. |
| 8 | All as per item No 06.00 above but 5 mm dia and over upto and incl 10 mm dia in stirrups, spacers and binders complete all as specified and directed by Engr-in-Charge. |
| 9 | Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed. |
| 10 | Demolition cement concrete (reinforced) of any description and in any position complete all as specified and directed. |
| 11 | M&L for Brick work with fly ash bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar (1:6) using old size bricks complete all as specified and directed. |
| 12 | M&L for rendering 15 mm thick cement plaster in CM (1:4) on fair face of brick or concrete surfaces of walls finished even and smooth without using extra cement complete all as specified and directed. |
| 13 | M&L for preparation of new plastered external wall surfaces and applying one coat of external texture paint of approved make like Asian Paints (Apex Duracast) or Berger Paints (Tartaruga) to the desired architectural pattern using specialized rollers, trowels, or spray equipment, over one coat of exterior acrylic primer, ensuring the underlying plaster is fully cured for a minimum of 14 days, free of dust, and treated for minor cracks with an approved exterior compound; the primer must dry for 4–6 hours before texture application, and the entire workmanship must be executed with uniform thickness, avoiding visible joints or overlaps, followed by a final topcoat of silicone-protected high-performance exterior emulsion (like Asian Paints Apex Ultima or Berger Weather Coat Long Life) to provide long-lasting water repellency, dirt resistance, and weather protection, while utilizing sturdy double-stage scaffolding and taking necessary protective safety measures for workers and adjacent fixtures, complete all as specified and directed. |
| 14 | M&L for RCC design mix M-25 (20 mm graded aggregates) for Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns (Column upto plinth beam) etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed. |
| 15 | M&L for RCC design mix M-25 (20 mm graded aggregates) for Columns, Pillars, Piers, Posts and struts etc complete all as specified and directed. |
| 16 | M&L for RCC design mix M-25 (20 mm graded aggregates) for Beams, Cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed. |
| 17 | M&L for Providing cement concrete type B-I,1:2:4(20mm graded agg) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028 , water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed. |
| 18 | M&L for Y shape angle posts ,struts and similar works as in fencing including cutting tops to slope as directed , drilling holes , notching for wire etc, including all necessary drilling bolting or revited and similarly work confirming to Fe-290 complete all as specified and directed. |
| 19 | M&L for preparation of new or previously untreated surfaces, of steel and iron work of any description not otherwise described over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of Red oxide complete all as specified and directed. |
| 20 | S&F Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. (each line wire to be measured) complete all as specified and directed. |
| 21 | S&F concertina coil fencing with punched tape concertina coil stretched to a length of 10 metres to achieve 600 mm dia (weighing not less than 8.50 Kg per 10 RM of length), having 50 Nos rounds per 5.4 metre length, spring core wire (2.5 mm thick) of high tensile strength of 165 kg/sqmm with tape (0.52mm thick) and weight 43.478 gm/metre and fixing the same with existing Y-shape angle iron to steel parts and another coil/MS Nibs alloys shown on drgs incl fixing with special galvanised fastners such as clips, U clips complete all as specified and directed.Note :- Linear length of coil after stretching and fixing shall be measured for purpose of Payment. |
| 22 | Form work for flat rough finished surfaces of concrete to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and directed. |
| 23 | Form work for flat rough finished surfaces of concrete to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc.complete all as specified and directed. |
| 24 | Form work for rough finished surfaces of concrete Square, Rectangular or polygonal to sides of pillar, struts, posts, piers, columns and stanchions etc complete all as specified and directed. |
| 25 | M&L for Granite (of any type) tiles 20mm thick (approved colour) machine cut Granite work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking plat-forms and like, bedded with 20mm screed bed in cement mortar 1:4 and jointed with grey cement slurry including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite stone including grinding, and polishing complete all as specified and directed. |
| 26 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 27 | S&F Framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walkways; railings for balcony and parapet; Framed work rolled section as in framing compound girder staging for water tank,cooler stand as and the like built up from two or more beam or channel section or angles with plates stiffeners etc and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed. |
| 28 | Surface excavation n.exc (not exceeding) 30cm deep and averaging 15cm deep and getting out in Soft/loose soil complete all as specified and directed. |
| 29 | M&L for Hardcore of gauge n.exc 63mm broken brick deposited, spread and levelled in layers n.exc 15cm thick, watered and rammed to a true surface complete all as specified and directed. |
| 30 | M&L for 100mm thick PCC 1:4:8 type D-2 using (40mm graded aggregate) as in sub base of floor complete all as specified and directed. |
| 31 | M&L for 25mm thick cement concrete type B-0,1:2:4 (12.5mm graded aggregate) as in sub bsae floor complete all as specified and directed. |
| 32 | M&L for Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mmthick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed. |
| 33 | M&L for Kota stone of 25mm thick slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1: 4 (1 cement: 4 coarse sand) complete all as specified and directed.Note :- Removing building materials /old waste unwanted existing material of any description or any type etc excluding excavated soil on alternate day to a distance of 5km or beyond out side MOD Land and the cost for the same is deemed to be included in the quoted unit rates.Note : excavation to be carried out manually if during excavation there are any LT/HT cables, water supply pipe lines and other cable / pipe comes, need to be shifted carefully incl required fittings / accessories and cost of same deemed to be included in the quoted rates. |
| 34 | M&L for Chequered precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand).Light shade pigment using white cement complete all as specified and directed.Note: (a) Srl Item No 01.00, 05.00, 06.00, 10.00 to 13.00, 26.00, 29.00 & 31.00 to 33.00 of BOQ are major items for the subject tender and material in respect of these items shall be procured within one month after placing of work order and produced before Engg in Charge alongwith original purchase vouchers as per direction of Garrison Engineer and shall obtain a certificate from Engg in charge that material in respect of above mentioned items have been submitted in the office of Engg in charge in their safe custody.(b) Materials in respect of Freakishly low declared items if any at the time of acceptance of contract shall be procured within one month after placing of work order and submit the same in the office of Engg in charge alongwith original purchase vouchers in their safe custody and shall obtain a certificate from Engg in charge. Total in Figures 0.0 0.0 INR Zero Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 29, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 17, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 16 daysNov 19, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 18 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender