Tender For Repair And Renovation Of Vip Quarters 1 To 7 At Wazarat Road
Tender Value
9.70 Lakhs
Estimated cost
Bid Submission
02 Nov 2026
0 days left
EMD
19400
Bank guarantee accepted
Document Fee
600
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jammu → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair And Renovation Of Vip Quarters 1 To 7 At Wazarat Road
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 meters lead :15.12.1 Of area of 3 sqm. and below |
| 2 | Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-incharge:15.2.1 1:3:6 or richer mix (i/c equivalent design mix) |
| 3 | 15.56 Dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meters lead. |
| 4 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 meters lead.15.23.1 For thickness of tiles 10 mm to 25 mm |
| 5 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): 2nd Class Deodar wood |
| 6 | Sal wood |
| 7 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size withnecessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: -Butt hinges andnecessary screws shall be paid separately). 9.6.3 Second class deodar wood |
| 8 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area ofopening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40mm thick. 9.8.15 12 mm thick Marine plywood conforming to IS: 710 |
| 9 | Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge : 9.28.3 Second class deodar wood |
| 10 | Providing and fixing 19mm thick ply including cutting wastage complete (century, green or equivalent). (LMR) |
| 11 | Providing and fixing curtain rods with all necessary arrangements |
| 12 | Providing and fixing ISI marked oxidized M.S. pressed butt hinges with necessary screws etc. complete: 9.56.2 100x58x1.90 mm |
| 13 | Providing and fixing ISI marked oxidized M.S. tower bolt black finish, (Barrel type) with necessary screws etc complete. 9.61.3 150x10 mm |
| 14 | Providing and fixing ISI marked oxidized M.S. handles conforming to IS : 4992 with necessary screws etc. complete : 9.64.2 100 mm |
| 15 | Providing and fixing magnetic catcher of approved quality in cupboard/wardrobe shutters including fixing with necessary screws etc. complete. 9.116.2 Double strip (Horizontal type) |
| 16 | Renewing glass panes, with wooden fillets wherever necessary :14.7.1 Float glass panes of thickness 4.0 mm (weight not less than10kg/sqm) |
| 17 | Providing and fixing aluminium Partiton including all necessary arrangements. |
| 18 | 4.17 Providing & laying damp-proof Course 40 mm thick with cement concrete 1:2:4 (1 cement:2 coarse sand: 4 graded stone agg 12.5 mm nominal size) and curing complete |
| 19 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete 11.52.2 Size of tile 600x600 mm (Kajaria/Somany) |
| 20 | Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS:15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with whitecement and matching pigment etc., complete. (Kajaria/Somany) 11.50.2 In all colours, shades, except White, Ivory, Fume Red Brown |
| 21 | 8.31 CERAMIC GLAZED TILESProviding and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointingin white cement mixed with pigment of matching shade complete. (kAJARIA/Somany) |
| 22 | 12mm cement Plaster of Mix 13.1.1 1:4 (1 cement : 4 fine sand) |
| 23 | 13.100 Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping and sand papering and preparing the surface smoothincluding necessary repairs to scratches etc. complete. |
| 24 | 13.88 Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface toprepare the surface even and smooth complete. 1mm thick |
| 25 | 13.90 Wall painting with premium acrylic emulsion paint of interior grade,having VOC (Volatile Organic Compound) content less than 50 grams/liter of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. (Nerolac, Asian). One or more coat |
| 26 | Two or more coats |
| 27 | 11.36 KOTA STONE FLOORINGKota stone slab flooring 25 mm thick over 20mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing, polishing and curingcomplete with base of cement mortar 1:4 (1 cement : 4 coarse sand) : |
| 28 | Finishing walls with Acrylic smooth exterior paint of required shade:13.119.1 Old work (two or more coats applied @ 1.67 liters/10sqm onexisting cement paint surface) |
| 29 | 13.107 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade, one or more coats on old work. |
| 30 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 4.4.4 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size) |
| 31 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°,landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiralstair cases upto five level including curing but excluding the cost of centring, shuttering,finishing and reinforcement with5.3.1 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal |
| 32 | Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge:15.7.4 In cement mortar |
| 33 | Centering and shuttering including strutting, propping etc. and removal of form for: 5.9.3 Suspended floors, roofs, landings, balconies and access platforms. |
| 34 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing inposition and binding all complete above plinth level 5.22A.6 Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 35 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 infoundation and plinth including curing in :6.1.4 Cement mortar 1:4 ( 1 cement : 4 coarse sand) |
| 36 | Extra for brick work with common burnt clay bricks/cement concrete bricks insuperstructure above plinth level upto floor five level |
| 37 | Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steelprimer using structural steel etc. as required. 10.25.2 In gratings, frames, guard bar, ladder, railings, brackets, gates andsimilar works. |
| 38 | Providing and fixing PVC Panelling thick superior quality complete. |
| 39 | Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls andfloors wherever required.18.1.2 White vitreous china Orissa pattern W.C. pan of size 580x440mm with integral type foot rests. |
| 40 | Providing and fixing mirror of superior glass (of approved quality) and ofrequired shape and size with plastic moulded frame of approved makeand shade with 6 mm thick hard board backing18.32.3 Oval shape 450x350mm (outer dimensions) |
| 41 | 18.19 Providing and fixing P.V.C low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittingsand fixtures complete:18.19.1 10 liter capacity -White |
| 42 | Providing and fixing Waste Coupling 40mm |
| 43 | Providing and fixing SS Towel Rail 24''long |
| 44 | Providing and fixing on wall face un-plasticized Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion.(i) Single socketed pipes12.58.1 75 mm diametre |
| 45 | Providing and fixing on wall face un-plasticized Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ringconforming to IS: 5382 leaving 10 mm gap for thermal expansion.(i) Single socketed pipes12.58.2 110 mm diametre |
| 46 | Providing and fixing 150mm dia PVC pipe including all fittings and fixtures complete. |
| 47 | Providing and fixing on wall face un-plasticized - PVC moulded fittings/accessories for un plasticized Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. 12.59.5.1 75 mm bend |
| 48 | Providing and fixing on wall face un-plasticized - PVC moulded fittings/accessories for un plasticized Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. 12.59.4.2 110 x 110 x 110 mm ( Single TEE) |
| 49 | Labour for repair to steel work including hire charges of welding set |
| 50 | Half brick masonry with common burnt clay (non-modular) bricks of class designation7.5 in foundations and plinth including curing in :6.15.1 Cement mortar 1:3 ( 1 cement : 3 coarse sand) |
| 51 | 6.16 Extra for half Brick masonry in superstructure above plinth level upto floor V level |
| 52 | 4.18 Providing and laying damp-proof Course 50 mm thick with cement concrete 1:2:4 (1cement:2 coarse sand: 4 graded stone aggregate 20 mm nominal size) and curing complete |
| 53 | Providing and fixing 110mm dia PVC Plain Bend |
| 54 | Providing and fixing Bend Mixer Jaquar 29281 |
| 55 | Providing and fixing Basin Mxer Jaquar 90238 |
| 56 | Providing and fixing Hand Jet Jaquar 573 |
| 57 | Providing and fixing Angle Valve Jaquar No. 29053 |
| 58 | Providing and fixing Over Head Shower Jaquar No. 1613 |
| 59 | Providing and fixing Shower Arm Jaquar 4T9Z450 |
| 60 | Providing and fixing Long Nose Bib Cock Jaquar |
| 61 | Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone- III) : 3 graded stone aggregate 20 mm nominalsize), foundation concrete 1:4:8 mix (1 cement : 4 coarsesand (zone- III) : 8 graded stone aggregate 40 mm nominal size),inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4graded stone aggregate 20 mmnominal size) finished with a floatingcoat of neat cement complete as per standard design : 20.7.1.1 With common burnt clay F.P.S (non modular) bricks of class designation 7.5 |
| 62 | Providing and fixing Sink Mixer Jaquar No. 38309 |
| 63 | Finishing walls with textured exterior paint of required shade : Old work (two or more coats on existing cement paint surface applied @3.28 litre/10 sqm.) |
| 64 | 14.74 Cleaning of terrace/loft water storage tank (inside surface area) upto2000 litre capacity at all heights with coconut brushes, duster etc., removal ofsilt, rubbish from the tank and cleaning the tank with fresh waterdisinfecting with bleaching powder @ 0.5gm per litre capacity of tank including marking the date of cleaning on the side of tank body with thehelp of stencil and paint and disposing of malba all complete as perdirection of Engineer-in-Charge. (The old date already written on tankshould be removed with paint remover or black paint and if date is notwritten with the stencil or old date is not removed deduction will be made @ Rs. 0.10 per litre) (if during cleaning any GI fittings or ball cock isdamaged that is to be repaired by contractor at his own cost and nothing extra will be paid on this account) |
| 65 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc.: 15 mm dia. nominal bore (2 X 25'-0'' = 50 rft ) |
| 66 | 19.4.1.2 20 mm dia. nominal bore ((2 X 25'-0'' = 50 rft ) |
| 67 | 19.4.1.3 25 mm dia. nominal bore (2 X 25'-0'' = 50 rft ) |
| 68 | 19.4.1.6 50 mm dia. nominal bore ( 2 x 10'-0'' = 20 rft) |
| 69 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings. This includes jointing of pipesand fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge. 19.3.2 Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good thewall etc. 15mm nominal outer dia pipes. |
| 70 | 19.3.2.2 20mm nominal outer dia pipes. |
| 71 | 19.3.2.3 25mm nominal outer dia pipes. |
| 72 | 19.43A Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-incharge. |
| 73 | Providing and fixing un plasticized P.V.C. connection pipe with PTMT nuts, collars and bush of approved quality and colour19.65.2 15 mm nominal bore with 45 cm length. |
| 74 | Earth work in bulk excavation by manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge.2.6.1 All kinds of soil : |
| 75 | 14.14 Regrading terracing of mud phaska covered with tiles or bricks, in cement by dismantling tiles or bricks, removing mud plaster, preparing the surfaceof mud phaska to proper slope, relaying mud plaster gobri leaping and tiles or bricks, grouted in cement mortar 1:3 (1 cement: 3 fine sand), including replacing unserviceable tiles or bricks with new ones and disposal of unserviceable material to the dumping ground (the cost of the new tiles or brick excluded) within 50 meters lead. |
| 76 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C waste fittings complete: 40mm diameter |
| 77 | Providing and fixing 38mm Waste coupling for sink, wash basin complete |
| 78 | 19.38 Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable lockingarrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank |
| 79 | Providing and fixing 6mm thick ply (Century, Green or equivalent) |
| 80 | Providing and fixing 1.0mm thick laminate (mica) |
| 81 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as perI.S. 13983 with C.I. brackets and stainless steel plug 40 mm, includingpainting of fittings and brackets, cutting and making good the wallswherever required :18.11.1 Kitchen sink with drain board18.11.1.1 510x1040mm bowl depth 250mm |
| 82 | Labour engaged for easing of door, window. Carpenter |
| 83 | Helper |
| 84 | Providing and fixing Brass handle |
| 85 | Providing and fixing Havells 1HP Single Phase Pressure Pump. |
| 86 | Providing and fixing Pressure pump switch, censor/ controller of Havells Make. |
| 87 | Providing and fixing of wall paper of superior quality |
| 88 | Providing and Fixing UV sheet 3mm thick of superior quality make complete. |
| 89 | Providing and fixing PVC Wall panel louvers |
| 90 | Providing and fixing 4mm thick teak ply straight grain(Green, Century, Amulya) |
| 91 | Providing and fixing Temporary scaffolding by way of labour and material consumed. 6 Bamboo for 5 days |
| 92 | 8 Ballies for 5 days |
| 93 | 8 Bamboo Mesh for 5days |
| 94 | Rope =5 bundles |
| 95 | 2 Mason for 5 days |
| 96 | 2 labour for 5 days |
| 97 | Wall Painting with Interior Emulsion of approved quality (Nerolac, Asian, Royale). One or more coat |
| 98 | Two or more coat |
| 99 | Applying PU Polish Mat finish incl. sand papering removing dirt dust complete. |
| 100 | Applying one coat of water thinable cement primer of approved brand and manufacture complete. |
| 101 | Applying wood primer of approved quality & manufacture complete. |
| 102 | Providing and fixing of POP false ceiling of required design/ pattern including the cost of necessary framework, wire mesh , POP and other fixtures including scaffolding, wastages and all sorts of carriage complete job |
| 103 | Extra for making cornice/moulding complete including labour and material complete. |
| 104 | Tile brick masonry with common burnt clay tile bricks of class designation 10 infoundation and plinth including curing complete in:6.20.4 Cement mortar 1:4 (1 cement : 4 coarse sand) |
| 105 | Engaging labour for cleaning of brick tile floor/edging/grooves by way of plastic brushes and wire brushes wherever required. |
| 106 | 23.6 Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying :(a) after surface preparation, first layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound@ 0.253 kg/sqm. (b) laying second layer of Fibre glass cloth when the first layer is stillgreen. Overlaps of joints of fibre cloth should not be less than 10 cm. (c) third layer of 1.5 mm thickness consisting of slurry of cement @1.289 kg/sqm mixed with water proofing cement compound @ 0.670kg./sqm. and coarse sand @1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30cm on parapet wall and tucked into groove in parapet all around. (d) fourth and final layer of brick tiling with cement mortar (which will be paid for separately) For the purpose of measurement the entire treated surface will be measured. |
| 107 | Painting with DECO Spray paint (Metal finish of superior quality and finish). |
| 108 | Providing and fixing Heavy Duty Phase Plain/Disk |
| 109 | Providing and fixing WC seat cover one piece hydraulic |
| 110 | Providing and fixing one piece wall hung, floor mounted Duravit seat with including all necessary fittings and fixtures complete. |
| 111 | Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slabover 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.11.68.1 Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent. |
| 112 | Providing and fixing T-Bolt (8'' Long) SS |
| 113 | 19.39 Providing and fixing 15 mm nominal bore C.P. brass bib cock of approved quality conforming to IS : 8931 |
| 114 | 19.40 Providing and fixing 15 mm nominal bore C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. |
| 115 | 19.41 Providing and fixing 15 mm nominal bore C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms |
| 116 | 19.43 Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931 |
| 117 | 19.44 Providing and fixing 15 mm nominal bore of standard back type C.P. brass close hole basin mixer pillar tap of approved quality and make, weighing not less than 1.970 kg. |
| 118 | Providing and laying in position cement concrete of specified grade including curing butexcluding the cost of centring and shuttering. All work upto plinth level with:4.4.5 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) |
| 119 | Providing and laying in position cement concrete of specified grade including curing butexcluding the cost of centring and shuttering. All work upto plinth level with:and : 6 graded stone aggregate 40 mm nominal size)4.4.7 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) |
| 120 | 13.8.2 15mm cement plaster on the rough side of single or half brick wallfinished with a floating coat of neat cement of mix :13.8.2 1 : 4 ( 1 cement : 4 fine sand) |
| 121 | Providing and fixing Hettich Crank Door Hinges with Mounting Plates & Cover Caps |
| 122 | Site clearance after completion of work by Engaging Labour |
| 123 | Supply of good earth including stagging at site of work and spreading extra complete |
| 124 | Repair / inspection of pressure pump by authorise mechanic (for each visit) |
| 125 | Providing and fixing teak ply 4mm thick |
| 126 | Providing and fixing tower bolt brass 8 inch heavy duty |
| 127 | Disposal of dump mulba beyound muncipal limit including loading unloading complete (trolly) |
| 128 | Providing and fixing precoated galvanized iron profile sheets (size, shapeand pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05 %) total coated thickness with zinc coating 120 grams per sqm as perIS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should haveprotective guard film of 25 microns minimum to avoid scratches duringtransportation and should be supplied in single length upto 12 metre or asdesired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x 55 mm) with EPDM seal, complete uptoany pitch in horizontal/ vertical or curved surfaces, excluding the cost ofpurlins, rafters and trusses and including cutting to size and shapewherever required |
| 129 | Providing and fixing stainless steel (Grade 304) railing made of Hollowtubes channels, plates etc. including welding ,grinding, buffing, polishingand making curvature (wherever required) and fitting the same withnecessary stainless steel nuts and bolts complete ,including fixing the railingwith necessary accessories and stainless steel dash fasteners, stainless steelbolts etc. of required size, on the top of the floor or the side of waist slabwith suitable arrangement as per approval of Engineer-in-charge, (forpayment purpose only weight of stainless steel members shall be consideredexcluding fixing accessories such as nuts, bolts, fasteners etc.) |
| 130 | Providing and Fixing of HDHRM board having a density not less than 850 Kg/m3 and thickness 17mm, ISI marked and manufactured by a reputed company after CNC/ Router cutting to achieve the required design, using a router or CNC cutting machine as per the approved pattern- such as fluted panels, door panels, wall trims etc ISI marked and manufactured by a reputed company, including cost of all materials, loading, umloading handling and carriage upto the site of work incl all labour, tools, machinery, adhesive/glue and finishing work complete in all respects as directed by Engineer in Charge but excluding the cost of paint/polish work, which shall be paid separately |
| 131 | Providing and fixing of wall mounted chimney, pyramid shape filterless chimney of standard make including exhast pipe,casing and outer wire mesh closing on outer wall. Complete job |
| 132 | Providing and fixing floor mounted, white vitreous china single piece,double traps syphonic water closet of approved brand/make, shape,size and pattern including integrated white vitreous china cistern ofcapacity 10 litres with dual flushing system, including all fittings andfixtures with seat cover, cistern fittings, nuts, bolts and gasket etcincluding making connection with the existing P/S trap, complete inall respect as per directions of Engineer-in-Charge |
| 133 | Providing and fixing of china ware urinal size 355x345x535mm (Hindware/Cera/Parryware or equivalent make) as per the direction of Engineer Incharge. |
| 134 | Providing and fixing of welded mesh including welding, fixing, wastage etc. complete 1.5 inch x 1.5 inch apart of 2.8 mm thickness wire including priming coat complete. |
| 135 | 9999.4200455 Providing and fixing of prefabricated structrure made up of structural steel and polyurethane foam pannels in walls with attached general washroom on ground floor. The prefabricated double storey structure shall be made up of structutal steel and PUF pannels, prepainted coloured profile steel sheets with all design parametres in compliance to all relevent latest codes of design for steel and concrete structure and shall be inclusive of all sub items S.no 2.01 partition, 2.02 windows ,2.03 doors ,2.04 false ceiling ,2.05 ACP sheet ,2.06 gable end ,2.07 sunshade ,2.08 under flooring ,2.09 All steel members ,2.10 fasteners and fittings ,2.11 finishes in technical sanction estimate. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 28, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 02, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodayNov 03, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 1 dayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender