Tender For Repair And Renovation Of C-1 Old B.C Jammu By Way Of Panelling ,Replacement Of Doors And Windows ,Electric Fittings , Upgradation Of Kitchen And Bathroom Etc
Tender Value
1.92 Lakhs
Estimated cost
Bid Submission
05 Nov 2026
3 days left
EMD
3840
Bank guarantee accepted
Document Fee
600
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jammu → Jammu and Kashmir
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair And Renovation Of C-1 Old B.C Jammu By Way Of Panelling ,Replacement Of Doors And Windows ,Electric Fittings , Upgradation Of Kitchen And Bathroom Etc
BOQ
| Sl. No. | Item Description |
| 1 | Demolishing cement concrete manually/by mechanical means including disposal of material within 50 meters lead as per direction of Engineer-in-charge: 1:3:6 or richer mix (i/c equivalent design mix) |
| 2 | Dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping groundwithin 50 meters lead. |
| 3 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: - 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size |
| 4 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete |
| 5 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 6 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 7 | Centering and shuttering including strutting, propping etc. and removal of form for: Suspended floors, roofs, landings, balconies and access platforms |
| 8 | Providing and fixing gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels . Granite of any colour or shade (Area of slab over 0.5 sqm) 18mm thick |
| 9 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 10 | Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface |
| 11 | Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete 1mm thick |
| 12 | Distempering with 1st quality Acrylic/oil bound washable distemper (ready-made) having VOC content less than 50grams/litre of approved manufacturer and of required shade and colour complete as per manufacturers’specifications, one or more coats on old work |
| 13 | Painting with synthetic enamel paint of approvedbrand and manufacture of required colour to givean even shade, one or more coats on old work |
| 14 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately Second class deodar wood |
| 15 | Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge Second class deodar wood |
| 16 | Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. White vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests |
| 17 | PF of CP ANGLE VALVE (cera/essco /jaguar) |
| 18 | Providing and fixing of wall mixer without hand shower (cera/essco jaguar) |
| 19 | Providing and fixing of Shortbody bibcock (cera/essco jaguar) |
| 20 | Providing and fixing uplasticized PVC connection pipe with brass unions (45 cm length) 15 mm nominal bore |
| 21 | providing and fixing CP brass shower rose with 15mm or 20mm inlet 100mm dia |
| 22 | Providing and fixing SS towel ring complete LMR |
| 23 | Providing and fixing SS towel rail complete LMR |
| 24 | Magnetic Catcher |
| 25 | HANDLE 4'' |
| 26 | HINGES 3 FT |
| 27 | FIXING MIRROR OF SUPERIOR GLASS OF APPROVED QUALITY AND OF REQUIRED SHAPE AND SIZE WITH PLASTIC MOULDED FRAME OF APPROVED MAKE AND SHADE WITH 6MM THICK HARD BOARD BACKING OVAL SHAPE 450*350MM (OUTER DIMENSION) |
| 28 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete (19.12.3) - 25 mm nominal bore |
| 29 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (new work)(19.36.3)- 25 mm nominal bore |
| 30 | Providing and fixing wash basin with C.I. brackets, 15 mm PTMT pillar cock, 32 mm PTMT waste coupling of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required. White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm PTMT pillar cock. |
| 31 | Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. |
| 32 | PROVIDING AND FIXING OF PVC BEND 4'' |
| 33 | providing &fixing of PVC Pipes for drainage,severage,rain water flow pipe etc including labour &material costs complete jobin all heights(LMR) 4\\" dia (9999.1080825) |
| 34 | PROVIDING AND FIXING OF PVC FLOOR TRAP |
| 35 | PROVIDING AND FIXING OF PVC TEE 4'' |
| 36 | PROVIDING AND FIXING OF HAND JET SPRAY |
| 37 | providing and fixing glass shelfs with bracket single set (18.33) |
| 38 | providing and fixing SS soap case LMR |
| 39 | Providing and fixing uplasticized PVC connection pipe with brass unions (45 cm length) 15 mm nominal bore |
| 40 | Engaged plumber for Geyser fitting complete incl. Fasteners, nuts, and bolts complete job |
| 41 | G.I. PIPES AND FITTINGS: Providing and fixing G.I. pipes complete with G.I.fittings and clamps, including cutting and making good the walls etc.: Concealed pipe including painting with anti corrosive bitumastic paint, cutting chases and making good the wall: 15 mm dia. nominal bore |
| 42 | Engaging trolley for shifting of mulba from site to beyond the municipality limit incl.Loading and unloading complete job |
| 43 | Providing and fixing glazed shutters for doors, windows and clerestory windows using 4mm thick float glass panes including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws Second class deodar wood |
| 44 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, allcomplete as per direction of Engineer-in-charge. (Note: -Butt hinges and necessary screws shall be paid separately).Second class D- wood : 35mm thick |
| 45 | providing and fixing (9.8.15) 12 mm thick Marine plywood conforming to IS: 710 |
| 46 | Providing and fixing chromium plated brass curtain rod having wall thickness of 1.25mm with two chromium plated brass brackets fixed with C.P. brass screws and PVC sleeves etc., wherever necessary complete : 9.46.3 25 mm dia |
| 47 | hardware fittings. providing &fixing IS Imarked M S pressed butt hinges bright finished with neceesary screws complete:100x58x1.9mm |
| 48 | 75x47x1.7mm |
| 49 | proving &fixing ISI marked oxidized MS sliding door bolts with nuts and screws complete 300x16mm |
| 50 | 250x16mm |
| 51 | proving &fixing ISI marked oxidized MS sliding tower bolts with necessary nuts and screws complete 150x10mm |
| 52 | 100x10mm |
| 53 | proving &fixing ISI marked oxidized MS door latches confirming to IS 5930 with screws complete 250x20x6mm |
| 54 | proving &fixing ISI marked oxidized MS handle confirming to IS 4992 with neceesary screws etc. complete .100 mm |
| 55 | half Brick masonary with common burnt clay (non-modular) bricks of class designation 7.5 in Superstructure including curing in Cement mortar 1:4 ( 1 cement : 4 coarse sand )upto plinth level |
| 56 | Providing and fixing of modular kitchen accessorles of 34.00 of approved specification incl carriage and fixing complete. SS Multi purpose basket 15''x20''x4'' |
| 57 | SS Multi purpose basket 15''20''x6'' |
| 58 | SS Multi purpose basket 15''x20''x8'' |
| 59 | SS Multi purpose basket 15''x20''x12'' |
| 60 | SS masnal pullout 15''x18''x18'' |
| 61 | SS Cuttlery basket 15''x20''x4'' |
| 62 | SS Thali basket 15''x20''x18'' |
| 63 | Angle valve two in one (essco jagauar ,cera,) |
| 64 | providing and fixing wall paper or required colour shade and design of standard make as directed by the EIC |
| 65 | Providing and fixing factory made flush door shutters 30 mm thick made of pre-laminated flat pressed three layer particle board conforming to IS: 12823 exterior grade (Grade I Type II) having one side decorative lamination of approved shade and other side balancing lamination including second class teak wood lipping of 25mm widex12mm thick with necessary screws and black enameled M.S. butt hinges complete as per directions of Engineer- in-charge |
| 66 | providing and fixing wardrobes with iron sheet hallow frame (4X1/2\\"X2\\") with 24 guage sheet &shutter with 22 guage sheet including lock and handles (godrej) painting inside with plain paint and outside with tenture paint (Asian,Nerolac,)fixing of frame s either 3'inches screw with drill and other works complete jobs ...for frame |
| 67 | providing &fixing of ply 19mm thick ply including cutting wasteage fevicol carriage etc complete item of superior make ( green,century,amulya archid ) conforming BWP 710 LMR |
| 68 | p/f 1.00 thick sunmica Complete job |
| 69 | providing &fixing of ply 6mm thick ply including cutting wasteage fevicol carriage etc complete item of superior make ( green,century,amulya archid ) conforming BWP 710 LMR |
| 70 | providing and fixing of 0.8mm thick sunmica including cutting ,wastage,fevicols nails etc.complete (green,amulya,vigro) LMR |
| 71 | Engaging labour for clearing the site after execution of work and other allied work |
| 72 | Providing and fixing of PVC Panneling on walls 8 to 10 mm thick incl all fittings and fixtures complete (wall affair or any eqviv. Make) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 28, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 05, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 3 daysNov 06, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 4 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender