Tender For Nctps - I - Operation Circle - Ca Dn. - Unit - Iii - Overhauling Of Cooling Water Pumps 3A, 3B, 3C And Its Fore Bay (Bhel Make, Model:Cw1q, Vertical Pump, Capacity: 16,500M3/Hr Per Pump); Respective Discharge Side Butterfly Valves (Sizes:1
Tender Value
Ref. Documents
Estimated cost
Bid Submission
04 Nov 2026
1 days left
EMD
45500
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Thiruvallur → Tamil Nadu
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Nctps - I - Operation Circle - Ca Dn. - Unit - Iii - Overhauling Of Cooling Water Pumps 3A, 3B, 3C And Its Fore Bay (Bhel Make, Model:Cw1q, Vertical Pump, Capacity: 16,500M3/Hr Per Pump); Respective Discharge Side Butterfly Valves (Sizes:1600 Nb); Cleaning Of Respective (-11M Deep) Suction Fore Bays; Cleaning Of Trash Screens & Trash Racks; Overhauling Of Respective Travelling Water Screens In Unit - Iii Aoh For The Year 2026-27.
BOQ
| Sl. No. | Item Description |
| 1 | Charges for Overhauling of 1 set of Pump Pull Out Assembly of CWP, by removal of flexible coupling, taper coupling, bearing housing with all internals, Motor stool stuffing box, lubricating water line and air vent line; dismantling of bush, seating, drive shaft, spiders, deflector, intermediate shafts, enclosing pipes, muff couplings, pump shaft, delivery taper, pump casing, impeller and cone lock nut; cleaning of all the pump parts, all fasteners; renewal/replacement of new/old rectified spare(s) and reassembling the Pump Pull Out Assembly intact and satisfactory commissioning, including cost of all consumables and hire charges for T & Ps,and cost of Muff coupling bolt complete. |
| 2 | Charges for Overhauling of 1 Set of CWP Outer Column Piping assembly upto Bell mouth, by dismantling the Top Support, discharge line spool piece with delivery branch assembly, intermediate pipe supports, bottom column pipe support and bell mouth; Cleaning of all flange spigots and holes; renewal/replacement of new/old rectified spare(s); aligning and reassembling of CWP Outer Column Piping assembly upto Bell mouth and delivery side spool piece, in any one of the CWP 3A/3B/3C, intact and satisfactory commissioning, including cost of all consumables and hire charges for T & Ps, complete. |
| 3 | Renewal of rubber Seal in 1600 mm Butterfly valve in Cooling Water pump, renewal of seal clamping pad, rethreading of worn-out threads in the seal mounting disc and clamping the seal with the disc. Checking the open / close operation of 1600 mm butterfly valves of Cooling Water pump.(Rubber seal will be supplied by NCTPS-I / TANGEDCO) |
| 4 | Charges for removal of crank lever from its position by heating, arresting the BFV disc; removal, overhauling and refixing of shaft and sleeve of BFV and reassembling crank lever intact, very hard to operate butterfly valve of CWPs 3A/3B/3C, including cost of all consumables and hire charges for T&Ps and satisfactory commissioning for free operation. |
| 5 | Charges for renewal / replacement of 1 No. of new / old released discharge line spool piece assembly either on BFV side or delivery branch side in any one of CWP 3A/3B/3C, by supporting, dismantling & removal of bolts & nuts; cleaning the matching surfaces and holes; aligning, reassembling of new/old rectified spare(s) on BFV side and tightening of all bolts and nuts, including cost of consumables and hire charges for T & Ps etc., |
| 6 | Charges for air blasting and cleaning of heavy marine growth in the stop log gate lowering side wall grooves by using air compressor and cleaning the entrapped heavy silt accumlation in order to facilitate free operation of stop log gate within grooves, including cost of consumables and hire charges for T&Ps, such as, air compressor, Diving regulator, diving spins, cylinder regulator, diving mask, diving dress, weight belt, manila rope, etc., in the fore bay of CWP 3A/3B/3C. |
| 7 | Charges for lifting, leading and lowering the stop log gate, arresting the water ( upto - 11 m) lifting the trash rack, cleaning the debris and lowering the dewatering pump, dewatering and cleaning the slurry; Alignment checking of TWS & bell mouth and lifting the dewatering pump from suction bay; lowering the rectified trash rack in the suction bay, Cleaning, painting of released Stop Log Gate and the TWS cover in f the forebay of CWP 3A/3B/3C, including cost of all consumables and hire charges for T & Ps, complete. (Note: After completion of dewatering works, the dewatering pump, discharge hose, foot valves which are under the TANGEDCO Ltd.'s scope of supply for the dewatering purpose should be cleaned thoroughly, dried and shifted to their location) |
| 8 | Charges for chipping and complete removal of hard Burnacles, silt, sand, etc... found inside the chamber of entire suction bay and discharge line walls upto bend at tunnel end; thorough cleaning and collection of removed debris, proper disposal of all collected debris, by shifting the collected debris to the repair bay by suitable means, transporting suitably and unloading at a remote low lying area within NCTPS-I, as directed by the field Engineers, including cost of providing scoffolding, debris lifting arrangements such as \\"A\\" frame, pulleys, ropes, other T & Ps, cost of consumables, etc... complete, in any of the CWP 3A/3B/3C. |
| 9 | Charges for Overhauling of any one of the Travelling Water Screen assembly in TWS 3A/3B/3C, by complete dismantling upto foot sprockets and plummer blocks, cleaning, related required rectifications, renewal / replacement of new / rectified spares, refixing of foot sprocket with integral tooth and support angles, reassembling intact and satisfactory commissioning, including cost of all consumables and hire charges for T & Ps, complete, in any one of the fore bay of CWP 3A/3B/3C. |
| 10 | Charges for lifting the trash screen from fore bay for cleaning and rectification in the Trash screen and renewing the damaged part of Nylon Screen rope suitably, by using SS materials and spare nylon rope of same size, after rectification lowering the trash screen in fore bay including cost of SS welding electrodes, cutting electrodes, Nylon rope, consumables and hire charges for T & Ps, in the Trash Screen Assembly of CWP 3A/3B/3C. (Required SS materials will be supplied by TANGEDCO Ltd. Required other consumables such as, SS and Cutting electrodes, Nylon rope are under Contractor's Scope of supply to the actual requirement) |
| 11 | Charges for Overhauling of a TWS Gear box, by removal of Gear box assembly from its position, after draining the lubricant, dismantling, cleaning, checking of all internals and chain link assembly, renewal/replacement of new/old rectified spare(s), replacement of worn out \\"O\\" rings, Oil seals, reassembling, lubricating the chain link assembly, topping up of gearbox lubricant and satisfactory commissioning, including cost of oil seals, O' rings, consumables and hire charges for T & Ps |
| 12 | Charges for thorough cleaning and epoxy coal tar painting over all the outer column pipes (both inner and outer surfaces) and other pump parts such as, pump casing, Delivery Taper, Delivery Branch assembly, all spiders and Top support in any of the CWP 3A/3B/3C, including cost of epoxy coal tar paint, consumables and hire charges for T & Ps, etc. |
| 13 | Charges for dismantling existing Rubber expansion bellow by loosening of flange bolts, after applying rust remover or heating by cutting gas, dismantling the Rubber expansion bellow assembly and bring it to the floor. Size 1600 mm Size. |
| 14 | Charges for cleaning all the loosened bolts and nuts of Rubber expansion bellow with kerosene, cleaning the top and bottom flanges and allied works. |
| 15 | Charges for loading the new expansion joint to the position, providing tie rods, bolts, nuts and tightening all the bolts mounting bolts , nuts and retention plates properly and other allied works. |
| 16 | Charges for drawl of new bellow from stores and devolution of retrieved bellow at Central Stores |
| 17 | Charges for Renewal of worn out studs in Top support for CWP seating area & Motor Stool seating area welding removal of existing damaged studs,drilling and tapping and fixing of new studs (SS 316 M30*140mm Studs), metal filling and grinding the welded surface including cost of consumables, and hire charges for T & P's |
| 18 | Charges for cleaning, removing of rust in the CWP Motor Stool in 3A/3B/3C area with one coat of protective coating of self priming Epoxy primer and two coats of Epoxy HB coal tar paint using different shades after thorough scrapping with emery sheet with manual labour and as per the direction and satisfaction of the Engineer in charge, the rate including the cost of scaffolding, T& P labour, lead, lift, etc., complete |
| 19 | Charges for providing and placing RCC 1:1½:3 using 6MM HBG metal including cost of all materials, lead, lift labour, LWF, vibrating charges and mixing charges excluding the cost of reinforcement etc. complete for damaged concreate of inner surface for discharge line spool piece DB side, BFV side & discharge pipe up to air release valve |
| 20 | Charges for removing the damaged cutless rubber bearing from spider bearing bracket assembly by using hydraulic machine and boring required size and suit the specifically made to suit this spider bearing bracket assembly including cost of consumables, T & P hire charges and transporting charges from site to work shop and back. |
| 21 | Charges for dynamic balancing of impeller & pump shaft assembly including cost of consumables & Labour charges for checking the dial out along the length of the shaft, suitably working on the shaft to confirm the trueness of the pump shaft. |
| 22 | Charges for cutting and removal of existing worn-out shaft SS sleeves in Intermediate shaft and assembling of new sleeves by gas flame heating of Cooling Water pump Capacity 16,500 M3/ Hr (Required SS shaft Sleeve will be supplied by TANGEDCO LTD) |
| 23 | Charges for removing of damaged flanged type cutless rubber bearing and boring pump casing ID to required size and OD of the flange type cutless rubber bearing specifically made to suit this pump casing ID including cost of consumables and hire charges for t&Ps. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 29, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 04, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 1 dayNov 04, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 1 dayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender