Tender For Providing Front Elevation, Name Board, Lawns And Gardens & Accessibility To Physically Challenged Persons Arrangements For Work Of Construction Of Post Attached Quarters For 5 Numbers Of Judicial Officers Quarters At Master Plan Complex In
Tender Value
7.69 Lakhs
Estimated cost
Bid Submission
13 Nov 2026
11 days left
EMD
7700
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Namakkal → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Providing Front Elevation, Name Board, Lawns And Gardens & Accessibility To Physically Challenged Persons Arrangements For Work Of Construction Of Post Attached Quarters For 5 Numbers Of Judicial Officers Quarters At Master Plan Complex In Namakkal Of Namakkal District
BOQ
| Sl. No. | Item Description |
| 1 | Providing ornamental Single border for parapet top in outside made of two border and of plain type mould of size 85x20mm. And 50x20mm. Plastered in Cement Mortar 1:1 (One cement and one sand) the projection edges will be cut in the smooth corners and finished with cement slurry. Rate inclusive of all materials, labour charges, scaffolding charges etc. complete and directed by the Departmental officers. |
| 2 | Cement Concrete 1:5:10 (One Cement, Five crushed stone sand and Ten hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick well rammed, consolidated and including curing etc. complete complying with standard specification and as directed by the departmental officers -Mixing by mechanical means |
| 3 | Brick work in cement mortar 1:5 (one cement and Five M-sand) using Fly ash bricks of size 230x110x70mm for the following complying with standard specification. For Foundation and Basement |
| 4 | Plastering with Cement Mortar 1:5 (One cement and Five Plastering sand), 12mm thick in all floors including mortar plasticizer at 200ml per 50Kg of cement used, curing etc. complete complying with standard specification and as directed by the departmental officers. |
| 5 | Providing & Fixing Modular Stainless Steel Railing of AISI 304 Grade consisting top handrail of 60 X 2mm thk connected with a SS plate as vertical balustrade anchor with SS Rossette plate spaced equally as per detailed drawing with all bends, stud joints & installation at site and fixing 12mm thick toughened glass panel as per approved drawing etc., complete complying with standard specifications and as directed by the departmental officers. |
| 6 | Supplying and fixing of Acryllic name plate 3mm thick with Vinyl printing including embossing the letters of all fonts and sizes etc., complete as per the direction of the departmental officers |
| 7 | Supplying and fixing Mild Steel grills for windows, ventilators etc.,complete complying with standard specifications and as directed by the departmental officers. |
| 8 | Supplying , fixing and roofing with colour galvalume sheet of 0.47mm thick with all necessary accessories such as J/V bolt and nuts of suitable Length with suitable bitumen washers complete complying with standard specification and as directed by the departmental officers. |
| 9 | Supplying and fixing in position CP Wall Mixture Tap 3 in 1 system with Hand Showers (heavy duty) of approved make conforming to BIS specifications and quality including cost of shellac, thread, etc., complete complying with standard specification and including cutting and threading wherever necessary. (Taps should be got approved by the Executive Engineer before use on the works) |
| 10 | Supplying and fixing in position CP shower rose with CP stop cock arrangement of size 15mm dia inlet and 100mm outlet to the pipe line with necessary cutting, threading and jointing using shellac etc., complete complying with standard specification and as directed by the departmental officers (The CP shower rose should be got approved by the Executive Engineer before use on works). |
| 11 | Supply and filling in foundation and basement with Gravel in layers of not more than 15cm.thick well rammed watered and compacted with surface vibrator, watered and consolidated etc. complete complying with standard specification and as directed by the departmental officers. |
| 12 | Supplying , fabricating and fixing in position Aluminium Anodised natural colour mat finish (With powder coating of any colours) Four track sliding window in all floors with Aluminium sections of outer frame Bottom Track [email protected] kg/m,Top & vertical 92.34x29.70x1.50 at 1.066 kg/m,and Shutter Vertical 39x20x1.50 at 0.493 kg/m, Top&Bottom 18x36.6x1.50at0.439 kg/m, Vertical locking arrangement 28.94x39x1.50at0.632 kg/m with necessary accessories such as rubber beadings, special hinges, lock, handle including supplying and fixing 4mm thick plain glass including cost of all materials , labours, power consumption required for fabrication , drilling holes in RCC colunm, slab, masonry walls wherever necessary with power drills to the required extent and make good to the original condition after fixing etc... complete complying with standard specification and as directed by the deparmental officers.The aluminium sections are to be anodised with matt finish under electrically controlled in accordance with IS 1868 / 1962 for an average anodic film thickness 15 microns etc., complete. |
| 13 | Supplying , fabricating and fixing in position Aluminium Anodised natural colour mat finish Three track sliding window in all floors with Aluminium sections of Outer Frame bottom [email protected] kg/m,Top & vertical 92.34x29.70x1.50 at 1.066 kg/m, Shutter vertical 39x20x1.50 at 0.493 kg/m,Top & Bottom 18x36.6x1.50 at 0.439 kg/m,Vertical locking arrangement 28.94x39x1.50at0.632 kg/m, the follwing sizes with necessary accessories such as rubber beadings, special hinges, lock, handle including supplying and fixing 4mm thick plain glass including cost of all materials , labours, power consumption required for fabrication , drilling holes in RCC colunm, slab, masonry walls wherever necessary with power drills to the required extent and make good to the original condition after fixing etc... complete complying with standard specification and as directed by the deparmental officers.The aluminium sections are to be anodised with matt finish under electrically controlled in accordance with IS 1868 / 1962 for an average anodic film thickness 15 microns etc., complete. |
| 14 | Supplying and planting flowering trees as directed by the departmental officers including digging holes in earth, refilling the same with manure,watering, dressing and removal of rubbish and surplus earth if any with all lead and lift. The cost includes maintenance of plant for a period of 30 days from the date of planting work etc., complete as directed by the Departmental Officers. |
| 15 | Supplying and planting foliage shrubs as directed by the departmental officers including digging holes in earth, refilling the same with manure,watering, dressing and removal of rubbish and surplus earth if any with all lead and lift. The cost includes maintenance of plant for a period of 30 days from the date of planting work etc., complete as directed by the Departmental Officers. |
| 16 | Supplying and planting Silver oak as directed by the departmental officers including digging holes in earth, refilling the same with manure,watering, dressing and removal of rubbish and surplus earth if any with all lead and lift. The cost includes maintenance of plant for a period of 30 days from the date of planting work etc., complete as directed by the Departmental Officers. |
| 17 | Supplying, laying and jointing UPVC pipes of Class 6 (having working pressure of 12.50kg/sq.cm) conforming to IS 4985- 2000 of approved quality and best variety conforming to BIS of the following dia including cutting and fixing UPVC specials using UPVC adhesives (but excluding cost of such specials) in accordance with IS 7634-3 (2003) and fixing into wall with teak wood plugs, PVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges upto 4 metre height above ground level, etc., complete complying with standard specifications. The PVC pipes shall be got approved by Executive Engineer before use on works - External water supply above ground level / Below ground level. |
| 18 | 25mm dia UPVC pipe |
| 19 | 20mm dia UPVC pipe |
| 20 | Supplying UPVC Specials in water supply arrangement (both in internal and external water supply arrangements (Since the labour for cutting, pasting, sundries have already been included under pipe line item of works, no separate provision for fixing UPVC specials needs to be allowed) |
| 21 | 25 mm dia UPVC Elbow |
| 22 | 25 mm dia UPVC Tee |
| 23 | 20mm dia UPVC Union |
| 24 | 25 X 20 mm dia UPVC Reducer With GST Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 29, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 13, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 11 daysNov 13, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 11 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender