Tender For Providing Of Gi Sheet For Compound Wall Above And Improvement Works To Burial Ground At Kurichi Gandhiji Road In Ward No. 85, South Zone Roc No.5065/2026/Md4
Tender Value
40 Lakhs
Estimated cost
Bid Submission
12 Nov 2026
11 days left
EMD
40000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Coimbatore → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Providing Of Gi Sheet For Compound Wall Above And Improvement Works To Burial Ground At Kurichi Gandhiji Road In Ward No. 85, South Zone Roc No.5065/2026/Md4
BOQ
| Sl. No. | Item Description |
| 1 | Cleaning the Heavy Juncle using Labour as per the Direction of the Departmental officers Etc., Complete |
| 2 | Clean removal of Cement plaster from walls with all labour charges as per the direction of dept. off. Etc. complete. |
| 3 | Dismantling Brick or stone in lime water walls under 3 mtr height With all labour charges as per the direction of dept. off. Etc. complete. |
| 4 | Earth work excavation for pile foundation using Agur of 230 mm dia pile foundation with all labour charges as per the direction of dept. off. Etc. complete. |
| 5 | Earth work excavation in all soils and Sub Soils with initial lead and lift including all Labour Charges as per the Direction of the Departmental officers etc. complete. |
| 6 | Cement concrete 1:2:4 mix ( One Cement, Four Sand , Eight Aggregate)using 40mm size HBG metal from approved quarry Complying with Standard Specification etc. complete |
| 7 | Supplying and erecting SHUTTTERING including necessary supports for plane surfaces such as RCC COLUMN FOOTING, PLINTH BEAM STAIRCASE STEPS etc., in all floors using mild steel sheets of size 90cm * 60Cm and BG 10 stiffened with welded mild steel angles for boarding supported by Casuarina props at suitable intervals etc., complete complying with standard specfication and as directed. |
| 8 | Supplying and erecting centering including necessary supports for plane surfaces in all walls using mild steel sheets with welded mild steel angles for boarding supported by Casuarina props at suitable intervals etc., complete complying with standard specfication and as directed. |
| 9 | Reinforced Cement Concrete 1:1.5:3, one part of cement, one and half parts of sand , three parts of 20 mm hard blue granite metal by volume, characteristic strength not less than 20 N/sqmm) machine mixed for all reinforced Cement Concrete works, including scaffolding, cost of all materials, machine mixing, vibrating, lifting, curing, labour charges for laying & finishing etc., but excluding the cost and fabrication of reinforcements and also excluding centering and formwork etc., complete complying with the relevant standard specifications at all leads inside the building. |
| 10 | Supplying and fabricating of reinforcement steel of all diameters for reinforced cement concrete works at all heights and depths including straightening, cleaning,cutting,ending, placing in position and binding, hoisting and welding if any including cost of power, electrodes etc, cost of annealed binding wire (18 gauge), providing overlaps, tying in position and providing necessary cover blocks for all works as per detailed drawings supplied (including chairs, cranks, lap rods, spacer bars, fan hooks etc.,) with the relevant standard specifications, complete for all leads & lifts. |
| 11 | Providing Solid Block masonry in Cement mortar 1:5 mix using I St Class Solid Block as per the direction of the departmental officers etc., complete. |
| 12 | Plastering for brickwork and concrete surfaces using cement mortar 1:5 (One part of cement, five parts of sand by volume) thickness 12mm (average) for all internal/external surfaces like superstructure, rainwater ducts, elevation |
| 13 | Painting with plastic emulsion paint in two coats over a base coat of Primer in approved colour and quality etc., complete. |
| 14 | Supplying, fabricating, erecting structural steel work for roofing welded or bolted type using MS channels, angles, plates and round bars etc. conforming to IS specification including primer coating and enamalpainting as per Design given by the departmental officers etc, complete as per standard specification |
| 15 | Providing Galvolume sheet Iron corrugated sheet of 0.40mm thick including bolt, nuts and bitumen washer, etc., complete etc. complete. |
| 16 | Painting with enamel paint in two coats of approved colour and quality over new iron work etc. complete. |
| 17 | Providing new 5.00 m height Street Light Pole and 2 \\" Dia M. S Bracket with Laying of 4x10 Sq mm PVC armoured LTUG Cable including necessary Spares with main board arrangements and Masonry work with 40 Watts LED Light Fittings with Lamp in ISI Mark Etc., complete. |
| 18 | supplying and fixing of HDPE Water Tanks with suitable specials including cost of materials to site and all other labour charges.etc |
| 19 | Supply and Laying of 4x10 Sq. mm PVC armoured LTUG cable in a Trunch to be Excavated at a Depth of 0.75 m Putting 0.15m Layer of Sand covering the Cable completely with bricks and Sand and Refilling the Earth to make Good SD 196 |
| 20 | Supply and Fixing of 90W LED Street light Fitting with necessary Bowl and Bracket and Bulp as per Standard Quality as per the Direction of the Departmental officers etc., complete. |
| 21 | Wiring with 2 x 1.5 sq.mm. PVC insulated SC unsheathed copper cable of 1100 V grade with suitable rigid pipe on walls & ceiling for open light / fan point |
| 22 | Supply and fixing of single box type 4\\"40W flu fitting completed with copper choke and condensor,with condult pipe suspension from the ceiling with PVC unsheathed Copper leads from terminals to the fitting with Tube. |
| 23 | Supply and run of 2 of 6 Sq.mm (84/0.3) PVC insulated SC Unsheathed CU.Condutor of 1100V on 7/20 GI bearer Wire for service connection Mains. |
| 24 | Supply and laying of pipes as per standard specification etc complete., |
| 25 | 63mm dia PVC pipe |
| 26 | 25mm dia upvc pipe |
| 27 | 20mm dia Tap |
| 28 | 25mm dia upvc valve |
| 29 | Filling with Crushed stone sand (M. Sand)in Layer by Layer including all labour charges for Spreading as per the Direction of the Departmental officers Etc, Complete |
| 30 | SupplyingandLayingTAMINBlockProviding andlaying of80mmthick high strength typeconformingIS15658-2006 of TAMIN Paver Block in size of minimum compressive strengthof40N/mm2 Inuniformshape ofapprovedmaketo be laid in flurring bone patternwithstonedustcushionbelowtheuniformshapofapprovednonskitting surface inthetopandtherate including leveling thebaseperpareationof pavers as subbase, stone dust cushion 150 mm thick laying out of pavement cut the pieces to fix the edge vibring the paverslsweeping transporting loading unloading of laying paver block as per the standard specifications |
| 31 | Manufacturing supplying and fixing of MILD STEEL DOOR made out of 50 x 50 x 6 mm M.S angle for outer frame,35 X 35 X 5mm M.S.Angle for outer frame of shutter. The entire shutter area shall be covered with CRCsheets (18 G) with 5Nos, of stiffners using M.S.Flats of size 25 X 6mm at equal intervals horizontally. The corners of the frames and shutter with CRC sheets shall be welded by adopting flash butt welding or any othersuitable method. Provision towards 3Nos, of Hinges incase of single shutters / 6Nos,of Hinges incase of Double shutters of 125 X 31 X 1.25mm size placed at appropriate intervals and provisions shall be madefor Tower bolts 2Nos, Aldrop 1No. The frame shall be provided with 6Nos,of Hold fast of 200mm length using 50 X 6mm M.S.Flat. The entire frame and shutter shall be provided with one coat of red oxide primer including cost of hold fasts,hinges, locking arrangements, handles wind appliences etc., complete and as directed by the departemental officers. |
| 32 | Supply and Planting of Varies Type Plants with 6 Months Maintanence as per the Direction of the Departmental officers etc., complete. |
| 33 | 1.Edge Plants |
| 34 | 2. Flower Type Plants |
| 35 | 3. Special Type Plants Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 28, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 12, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 11 daysNov 13, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 12 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender