Tender For Fabrication, Supply, Transportation And Erection Of 10 Nos Of Sluice Gates At Pankapala Over Budhanallah Under Superintending Engineer, Jaraka Irrigation Division, Jajpur For The Year 2026- 27.
Tender Value
1.64 Crore
Estimated cost
Bid Submission
16 Nov 2026
17 days left
EMD
1.64 Lakhs
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Jajapur → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Fabrication, Supply, Transportation And Erection Of 10 Nos Of Sluice Gates At Pankapala Over Budhanallah Under Superintending Engineer, Jaraka Irrigation Division, Jajpur For The Year 2026- 27.
BOQ
| Sl. No. | Item Description |
| 1 | Supply of structural steel materials of different section and sizes (IS:2062), stainless steel flats of different section and sizes (04 Cr 19 Ni of IS :1570), fabrication including machining and assembly of second stage embedded parts consisting of sill beam, side seal, track , guide etc., Sluice gate consisting of skin plate , horizontal girder, end vertical girder , seal flats etc., hoisting arrangements consisting of hoist bridge, supporting beams, Wormgear box, base plate etc. of total weight about 63 MT approx for 10 Nos. of sluice gate (Size-3552mm x 3250mm) as per specification with all accessories as per instruction of Engineer-in-charge. |
| 2 | Supply of following bought out materials for 10 Nos. of Sluice gate - Bolts, screw, nuts, washers etc- 1300 Kg, Bottom Rubber Seal(10mm thick)- 31.76 Mtr., Φ36 Side Seal(P-Type)- 58.68 Mtr., Split Pin 8x80 of IS:549- 10 Nos., Gate Pin Φ45x150 long- 20 Nos., Worm & Worm gear set R4/39/8/8.5-200mm of IS:3734 inclusive of cast steel worm gear, 55C8 worm & shaft, phosphorous bronze nut suitably square threaded, all including cost of material, machining etc- 20 Set, Single Thrust Ball bearing SKF-51224 or equiv- 40 Nos., Operating handle with GI pipe 20 Nos. ,Conical Head Grease NippleAM10x1-40 nos, Collar for wheel Pin-80 nos,Bronze bush for floating shaft- 40 nos,35 dia Floating Shaft-17.3 mtr,Gate stem cum screw rod with thread length 5900 mm SQ. 62x9 of IS :4694 - 48.97 Mtr., Grease & gear oil etc - 70 Kg., Stainless steel flat - 3180 Kg,HGHR Coupling AHG-101 for floating shaft-20 nos etc. |
| 3 | Erection, positioning, alligning, fixing, trial, commissioning, testing etc. of second stage embedded parts consisting of sill beam, side seal, track , guide etc., Sluice gate consisting of skin plate, horizontal girder,end vertical girder, seal flats etc., screw hoisting arrangements consisting of hoist bridge, cast iron gear box,supporting beams, cross beam base plate, fixing of anchor bolts, laying of chequered plate, Ladder support consisting of railings, steps etc. of total weight about 63 MT ( approx.) for 10 Nos. of Sluice gate as per specification with all accessories including machinery, fixtures, labour, cutting, welding, drilling, boring, cleaning, finishing, consumables with lead & lifts, as per instruction of Engineer-in-charge. |
| 4 | Painting of 2nd stage embedded parts (exposed portion), gate and its components in both upstream side and downstream side, hoisting components, ladder support including cleaning, degreasing, handling, cost of paint, applying of one coat Zinc primer of 40micron thick and three coats of coal tar epoxy paint of 100 micron each for 10 Nos. of Sluice gates all inclusive of labour, materials and consumables as per relevant IS Code specifications with all lead & lifts as per instruction of Engineer-In-Charge. |
| 5 | Providing reinforced cement concrete grade M-20 of approximately 10 cum for 2nd stage concreting using 20 mm and downgraded crusher broken hard granite aggregates of approved grade and quality from approved quarry free from weathered skin surface, dust and any other deleterious materials as per specification with all leads, lifts including cost, carriage, royalty and taxes of all materials, mixing and vibrating concrete by mechanical means including providing rigid & smooth steel form works for 2nd stage concrete works and dismantling the same after required days, curing, supply of all tools & plants, machinery, labour charges, cost & carriage of water for mixing and curing concrete including hire and running charges of all machinery / equipments, construction/erection and removal of gangways, staging’s, scaffoldings & incidental charges complete for 10 Nos. of Sluice gates as per the direction of the Engineer in-Charge. |
| 6 | Supply and fabrication of Ladder consisting of steps, horizontal railings, vertical railings, anchor bolts with all accessories including machineray, fixture, labour, cutting, alligning,welding, cleaning, finishing including consumables all complete as per specification with all lead & lifts excluding boughtout items. |
| 7 | Coffer Dam, dewatering, Watch and ward, with labour charges for loading and unloading all completeTransportation charges of above said half finished materials from workshop, generator ,welding transformer, derrick & other T & P with labour charges for loading and unloading in a 10T truk about Transportation worksite to & fro . |
| 8 | Concrete cutting of approximately 10 cum as per specification with all leads, lifts,including cost, carriage, royalty and taxes of all materials, mixing and vibrating concrete by mechanical means including hire and running charges of all machinery / equipments, construction/ erection and removal of gangways, stagings, scaffoldings & incidental charges complete for 10 Nos. of Sluice gates as per the direction of the Engineer in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 29, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 16, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 17 daysNov 17, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 18 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender