Tender For Construction Of Boundary Wall And Ancillary Work For Completion Of Ward Office In Ward No. 65
Tender Value
42.37 Lakhs
Estimated cost
Bid Submission
10 Nov 2026
5 days left
EMD
42400
Bank guarantee accepted
Document Fee
6000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Khordha → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Construction Of Boundary Wall And Ancillary Work For Completion Of Ward Office In Ward No. 65
BOQ
| Sl. No. | Item Description |
| 1 | PORTICOEarth work in laterite rock or any hard rock other then granite or disintegrated rock removed by chiselling including dressing and levelling the bed. |
| 2 | Carriage of earth soil after excavation including lead and lift etc complete. |
| 3 | Filling F&P with sand well watered and rammed. |
| 4 | C:C: (1:3:6) using 4 cm. size H.G. C.B metal including the cost of all materials, labour carriage, royalty etc complete. |
| 5 | R.C.C. work of M25 grade with 20 mm down grade chips (C.B.) including Hoisting & laying but excluding the cost of M.S. rod.Footing |
| 6 | Plinth Beam |
| 7 | Column upto GF Roof |
| 8 | roof slab |
| 9 | Labour charges for cutting, bending, binding and tying the grill including the cost of M.S. rod. |
| 10 | Fly Ash Brick masonry in C.M. (1:4) in founadtion & plinth having crushing strength not less than 75 Kg / cm2 with dimensional tolerance ± 2%. |
| 11 | Fly Ash Brick masonry in C.M. (1:6) in super structure having crushing strength not less than 75 Kg / cm2 with dimensional tolerance ± 2%. |
| 12 | Providing 6 mm thick cement plaster in CM (1:4) with neat cement punning over RCC surface finished smooth to the walls, watering & curing the same including cost, coveyance, royalties, taxes of all materials and cost of all labour T & p, sundries etc all complete as per the specification and direction of Engineer-in-charge. |
| 13 | 12mm thick C.P. in C.M.(1:4) over Brick Masonery works including closed deep chipping & slurry treatment including watering, curing, cost, carriage, royalty and taxes of all materials, cost of all labour, T&P etc complete as per the direction of E.I.C. |
| 14 | Fixing vetrified tiles in floors, treads or steps and landing over 25mm bed of C:M (1:1) jointed with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing complete including the cost of Industrial tiles |
| 15 | Finishing wall with water proofing cement paint two coats of weather coat |
| 16 | Finishing plastered surface of wall with putty smooth surface to receive painting. |
| 17 | Wall painting two coats with plastic emulsion paint with Primer of approved shade on new work to give an even shade including cost of paint & Primer |
| 18 | Earth work in all kinds of soil including rough dressing and levelling the bed. including dressing and levelling the bed. |
| 19 | Labour for laying sub-base WITH STONE DUST in layers not exceeding 100 mm. watering and compacting to required density in OMC with P.R.R. but excluding costs conveyance of sub-base materials. (Data for 2.83 Cum) |
| 20 | 2.50 cm thick D.P.C. using C.C. (1:2:4) using 12mm size hard granite (C.B.) chips. |
| 21 | 12mm thick C:P (1:6) over brick work |
| 22 | 16mm thick C:P (1:6) over brick |
| 23 | Fixing Granite tiles in floors, treads or steps and landing over 25mm bed of C:M (1:1) jointed with neat cement slurry mixed with pigment to match the shade of the tiles including rubbing and polishing complete including the cost of Industrial tiles |
| 24 | Cement washing 2coats over plastered surrface including all cost conveyance taxes and as per the direction of EIC etc complete |
| 25 | M.S. Grill gate made out of M.S. flat conforming to IS 2062/20006 painted with red oxide primer as pe the design approved. |
| 26 | Providing and Laying 80mm thick Factory made Chamfered edge Cement Concrete Paver Bliocks of required strength, thickness & size/shape made by table Vibratory method , to attain superior smoth finish using PU or Equivalent moulds ,Laid in required gray colour and Pattern over 50mm thick Compacted bed of coarse sand , copmacting and proper embedding / laying of interlocking Paver Blocks |
| 27 | Cost of Display Board & Photographs |
| 28 | 6mm thick C:P (1:4) finished smooth |
| 29 | Supplying ,fitting and fixing ofTWo track UPVC sliding window of approved make with 6mm thick glass of approved quality complete with frame shutters and all fitting and fixtures |
| 30 | Supplying, fitting & fixing of Stainless steel of 304 grade in hand railling using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm x 2mm @ 0.90mtr. C/C and stainless square pipe beacing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc with cost, conveyance, taxes of all materials, labour, T&P etc. requered for the complete in all respect.etc complete as |
| 31 | 2.50 cm thick grading concrete using C.C. (1:2:2) on roof slab with 6mm sizes down graded H.G. chips on new work |
| 32 | Supplying ,fitting and fixing of Openable UPVC doors with door frame of approved make approved quality complete with frame shutters and all fitting |
| 33 | Supplying ,fitting and fixing G.C.I. Sheet in roof drilling hole in windties including fixing of ridges valleys wind ties etc |
| 34 | Cost of Fixing 50 mm x 25 mm Rectangular Pipe |
| 35 | Painting two coats with any approved paint including the cost of enamel paint for Iron work. |
| 36 | PH WORKLaying in trenches unplasticised PVC pipes conforming to IS:4985-2000 and specials of the following outside diameter for all classes including jointing with supply of approved solvent cement by non-heat application method including testing as per specification complete110mm dia rigid UPVC pipe Class-3 (0.60 mpa) |
| 37 | Providing and fixing Chlorinated Polyvinyl Chloride (UPVC) pipes conforming to IS:15778, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge20mm diameter |
| 38 | 25mm diameter |
| 39 | 32 mm diameter |
| 40 | Cutting holes 250mm thick wall through existing brick work including making good the same in cement mortar (1:4) for taking GI/PVC pipes and fittings etc all complete as per specification. |
| 41 | Cutting hole in R.C.C floors and roofs upto 19 cm thick for passing G.I / P.V.C pipes and fittings etc and repairing the holes after insertion of pipes etc with cement concrete (1:2:4) including finishing complete so as to make it leak proof. |
| 42 | Supplying and fixing of C.P. fitting including all cost ofall cost Of Materials and labours etc15mm dia CP Brass Short body Bib Cock |
| 43 | 15mm dia CP Brass long body Bib Cock |
| 44 | 15mm dia CP Brass Pillar Cock |
| 45 | 15mm dia CP flange |
| 46 | 15mm dia CP extension piece - 25mm long |
| 47 | 15mm dia CP Brass Angle Stop Cock |
| 48 | Gender signage |
| 49 | C.P.revolving shower with arm (overhead) |
| 50 | C.P.grating |
| 51 | C.P Soap holder |
| 52 | C.P Towel rail |
| 53 | C.P Towel Ring |
| 54 | C.P waste |
| 55 | EWC standard seat cover |
| 56 | C.P sink waste |
| 57 | C.P Glass self with glass |
| 58 | CP Jet spary with 1.0 mtr PVC Tube |
| 59 | Two in one Health Faucet Bib cock |
| 60 | 10liter PVC low laying cistern including flush bend |
| 61 | Fixing of Brass or Gun Metal Full Way Valve conforming to IS:781-1995 of the following nominal sizes with wheel as per specification complete. |
| 62 | 25 mm dia Brass or Gun Metal Full Way Valve |
| 63 | 32 mm dia Brass or Gun Metal Full Way Valve |
| 64 | Fixing of Brass Ball Valve (Horizontal plunger type) conforming to IS 1703-1977 as per specification complete |
| 65 | Providing and fixing on wall face unplasticised Rigid PVC soil, waste and rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS: 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes |
| 66 | Fixing Wash Down Water Closet Coloured Pedestal type W.C. pan 580x440 mm \\"P'/'S'trap (European type W.C pan) etc all complete as per specification. |
| 67 | Fixing Wash Down Water Closet Coloured Pedestal type W.C. pan 580x440 mm \\"P'/'S'trap (Indian type W.C pan) etc all complete as per specification. |
| 68 | Fixing wash basins Vitreous china flat back wash basin 550x400 mm ARS -WHT- 3980 with hole for pillar taps conforming to IS 2556 : Part 4-2004 with Cast Iron or M S brackets painted white including cutting holes in walls and making good the damages etc all complete as per specification. |
| 69 | FixingSteel sink of size 550x400 mm with hole for pillar taps conforming to IS 2556 : Part 4-2004 with Cast Iron or M S brackets painted white including cutting holes in walls and making good the damages etc all complete as per specification. |
| 70 | Constructing brick masonary chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement:4 coarse sand) C.I. cover with frame (light duty) 455x610mm internal dimensions, total weight of cover with frame be not less than 38kg (weight of cover 23kg and weight of frame 15kg), R.C.C. TOP SLAB WITH 1:2:4 mix (1 cement: 2 coarse sad :4 graded stone aggregate 20mm nominal size ), foundation concrete 1:5:10 (1 cement: 5 fine sand : 10 graded stone aggregate 40mm nominal size), inside plastering 12mm thick with cement mortar 1:3 (1 cement :3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design Including all cost of labour, material, T&P etc. all complete as per the direction of engineer in chargeInside dimensions 900x800mmx450mm deep for pipe line with three or more inlet |
| 71 | Supplying all materials, labour, T&P and fixing PVC water storage tanks of 2000 ltr capacity confirming to IS:12701-1996 including cutting holes through the tank and fixing pvc pipe and fittings and providing extra sockets and jam nuts, fixing ball valve etc, including hoisting up to a required height above ground level and placing the tank over roof top with required staging height of minimum 450 mm above terrace level with supporting beam and base slab as per rerequirement . including conveyance of all materials to worksite etc all complete as per specification and direction of Engineer-in-charge.(Sintex/Equivalent) |
| 72 | Constructing brick masonary chamber for underground Gully trp chamber of size(250mmx250mmx675mm)and bends with bricks in cement mortar 1:4 (1 cement:4 coarse sand) C.I. cover with frame (light duty) 455x610mm internal dimensions, total weight of cover with frame be not less than 38kg (weight of cover 23kg and weight of frame 15kg), R.C.C. TOP SLAB WITH 1:2:4 mix (1 cement: 2 coarse sad :4 graded stone aggregate 20mm nominal size ), foundation concrete 1:5:10 (1 cement: 5 fine sand : 10 graded stone aggregate 40mm nominal size), inside plastering 12mm thick with cement mortar 1:3 (1 cement :3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design Including all cost of labour, material, T&P etc. all complete as per the direction of engineer in charge |
| 73 | Suppling and fixing of RCC BEAM STAGING FOR INSTALLATION OF PVC TANKS including all brick massonary and RCC woks including All plasteri and filling with annular space with sand etcall complete as per direction of Engineer-in-charge. |
| 74 | Supply all materials, labour, T&P and laying of following dia. SWR pipes and fittings, jointing with C.M. (1:1) fixing to walls with nails, bobbins and wooden plugs etc. all complete as per direction of Engineer-in-charge.110mm dia P.V.C. SWR S/S Pipe (ISI type-B) |
| 75 | 110mm dia PVC SWR door bend |
| 76 | 110mm dia. PVC SWR S/J with Door |
| 77 | 110mm dia. PVC SWR Nahani Trap |
| 78 | 110mm dia. PVC SWR Plain Bend |
| 79 | 110mm dia. PVC SWR Pipe clip |
| 80 | 110mm dia. PVC SWR Cowl |
| 81 | 110mm dia. PVC SWR off set bend |
| 82 | Supplying all materials, labour and T&P for construction of RCC Ring Tank(Soak way pit) 1.20 m dia x 2.00 mtr deep with cement mortar (1:6) for 0.45mtr. height of wall at top,cement plaster (1:4) inside and outside,inside filled with dry brick khoa of 50mm.to 100mm.size to a height of 2.00mtr.from bottom, covered by means of 24mm.thick R.C.C. perforated slab, 50mm.thick R.C.C.well cover in pieces fitted with iron rings including earth work in excavation and refilling of cavity around the pit etc. all complete as per approved design and drawing. |
| 83 | Construction of 30 user Septic Tank(3.82m x 2.63 m x 1.90m) etc all complete with watering and curing as per direction of Engineer-in-charge. (below GL beyond 1.5m upto 4.5m) |
| 84 | Sinking of ( 200 x150)mm dia bore well - 1 No by DTH method.Labour for drilling a perfectly vertical bore hole of specified dia for a specified depth below first level through consolidated and unconsolidated rock with down the hole hammer drilling rig or combination rig as required to suit the site condition as per the direction of the Engineer in charge including use of own rig with its accessories, tools and plant and consumables etc for lowering of 200mm/150mm dia G.I/P.V.C/M.S casing pipes for housing fitted with socket and with or without well screen as per the necessity for soft, medium, hard and boulder formation (G.I/ P.V.C/ M.S casing pipes if required to prevent collapse of overburden is to be provided by the contractor including lowering and withdrawing after completion of the tube well), 200mm dia to 400mm dia in overburden portion including packing of gravel supplied by the contractor for 400mm dia bore only.Drilling of 200mm dia bore00 mtr to 45mtr |
| 85 | Lowering the following size of G.I/P.V.C/M.S housing pipes with or without slotted pipes as per the necessity from first level up to 45.00m depth and fitted and fixed up in perfectly vertical position including cutting and threading of pipes and slotted pipes and supplying and fixing all jointing materials, tools and plant etc all complete and keeping the top of casing pipe threaded including plugging tube wells to prevent entry of foreign materials.Lowering of 200mm dia P.V.C casing pipes00 mtr to 30 mtrs 1x30.00mtr each=30.00mtr |
| 86 | 30 mtr to 60mtr 1x15.00mtr each=15.00mtr |
| 87 | Supplying polyvinyl chloride pipes as per ASTM-D-1785-89 having threads in accordance with DIN 2999 part-1/DIN-42225 part-II specification length of pipe (laying length) will be 3 mtrs. The pipes shall be supplied with both external and threaded with free socket. The pipe having external thread at one end i.e female and or belled end. The female end having internal thread is to be belled in order to accept the male end while jointing pipes with a bore threading shall be provided with a greave at the roof of the male thread accomodate flexible PVC/Rubber 'O' ring to make the joint water tight colour of the pipe shall be blue. The name of the manufacture along with batch No class of pipe shall be stranded legibly of each pipe length. |
| 88 | Supplying all materials, labour, T&P and providing and providing sanitary sealing by cement concrete grouting of annular space around GI/PVC/MS housing pipe upto 5m below first level (as per drawing) to plug the bore hole excluding cost of cement all complete as per direction of the Engineer in charge. Minimum one metre of casing pipe to be inserted in the bore into the rock at the bottom to ensure sanitary sealing . |
| 89 | Cleaning and developing the tube well with supply of compressor worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipment and labour as per direction of the Engineer in charge |
| 90 | Supplying all materials, labour, T&P for lowering of ND cashing pipe in the bore well including all necessary equipment and labour as per direction of the Engineer in charge . |
| 91 | Supplying all materials, labour, T&P for withdrawing casing pipes from the unsuccessful bore well including all necessary equipment and labour as per direction of the Engineer in charge . |
| 92 | Supplying all materials, equipment, labour & conducting reconnaissance survey, integrated Hydrological and Geophysical (Electrical Resistivity Method) survey & selection of potential source for exploration of first Water including selection and recommendation of site for drilling wells in selected locations in any part of Orissa under the following Geological formation: |
| 93 | Supplying all materials, labour, T&P and providing, fitting and fixing vertical submersible pump to run on 3 phase line voltage ranging from 320 volt to 450 volt conforming to IS: 8034/89 with jointing with GI/PVC/HDPE pipes, electrification, testing, commissioning, trial running, conveyance of all materials to worksite, etc all complete as per direction of the Engineer in charge (Texmo/ KSB/Kirloskar make)3 H.P. three phase 3 stage head -60 M, with discharge capasity 145 to 110 L.P.M With outlet dia 25 mm (keeping 100% standby) |
| 94 | DOL Control panel |
| 95 | 40mm dia steel short piece |
| 96 | Well cap |
| 97 | 50mm size CI bracket |
| 98 | 2.50sqmm flat cable |
| 99 | 20mm dia rigid UPVC pipes |
| 100 | Torchain rope with cover 5 mm ARK |
| 101 | Labour charges for lowering including transportation |
| 102 | Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor HDPE pipes and pipe fittings conforming to IS: 4984/2000 (10kgf/sqcm) of the following nominal bore with clamps and jointing by Fusion welding method including testing, making good the wall, ceiling and floor all complete as per specification and direction of the Engineer in charge32mm HDPE pipes (Finolex/Supreme make) wih 10 kg/cm2 Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 29, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 10, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 5 daysNov 11, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 6 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender