Tender For Renovation Of Sliding Gate Of Paripada Sluice Of Dasarathpur Block Under Drainage Division, Jajpur For The Year 2026 - 27.
Tender Value
28.14 Lakhs
Estimated cost
Bid Submission
09 Nov 2026
10 days left
EMD
28141
Bank guarantee accepted
Document Fee
6000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Bhadrak → Odisha
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Renovation Of Sliding Gate Of Paripada Sluice Of Dasarathpur Block Under Drainage Division, Jajpur For The Year 2026 - 27.
BOQ
| Sl. No. | Item Description |
| 1 | Supply of structural steel materials of different section and sizes (IS:2062), stainless steel flats of different section and sizes (04 Cr 19 Ni of IS :1570) consisting of diaphrgm,Btm.& side Seal clamp pl, sid seal mountIng pl of skin plate , seal flats etc., hoisting arrangements consisting of main beam, Base Plate,Chequer plate for 4 Nos. of fixed wheel worm gear box Sluice gate of Size-2150mm x 2800mm as per specification with all accessories as per instruction of Engineer-in-charge. |
| 2 | Supply of following bought out materials for 4 nos of Sluice gate - Bolts, screw, nuts, washers etc- 100 Kg, Bottom Rubber Seal(10mm thick)- 8.96 Mtr.,SIDE SEAL Ø 32mm x10mm th- 80mm width Rubber seal-19.20 mtr,lifting pin-4 nos , Worm & Wormgear set R4/39/8/8.5-200 mm of IS : 3734-8 nos. ,Single Thrust Ball bearing SKF51220 or Equivalent- 8 nos. ,operating handle-4 nos,grease& gear oil- 24 kg etc. |
| 3 | Erection, positioning, alligning, fixing, trial, commissioning, testing etc. of Sluice gate consisting of skin plate, horizontal girder,end vertical girder, seal clamp plate,side seal clamp plate, seal flats fixing of anchor bolts etc as per specification with all accessories including machinery, fixtures, labour, cutting, welding, drilling, boring, cleaning, finishing, consumables with lead & lifts, all complete as per instruction of Engineer-in-charge. |
| 4 | Painting of 2nd stage embedded parts (exposed portion), gate, and its components in both upstream side and downstream side, including cleaning, degreasing, handling, cost of paint, applying of one coat Zinc primer of 40micron thick and three coats of coal tar epoxy paint of 100 micron each for 4 Nos. of vent all inclusive of labour, materials and consumables as per relevant IS Code specifications with all lead & lifts as per instruction of Engineer-In-Charge. |
| 5 | Providing reinforced cement concrete grade M-20 of approximately 8.21088 cum for 2nd stage concreting using 20 mm and downgraded crusher broken hard granite aggregates of approved grade and quality from approved quarry free from weathered skin surface, dust and any other deleterious materials as per specification with all leads, lifts including cost, carriage, royalty and taxes of all materials, mixing and vibrating concrete by mechanical means including providing rigid & smooth steel form works for 2nd stage concrete works and dismantling the same after required days, curing, supply of all tools & plants, machinery, labour charges, cost & carriage of water for mixing and curing concrete including hire and running charges of all machinery / equipments, construction/erection and removal of gangways, staging’s, scaffoldings & incidental charges complete for 4 Nos. of vent as per the direction of the Engineer in-Charge. |
| 6 | Extra Item includes ladder railing,vent cleaning, Watch and ward etc all complete as per instruction of Engineer-in-charge. |
| 7 | Transportation charges of above said half finished materials from workshop, generator ,welding transformer, derrick & other T & P with labour charges for loading and unloading in a 10T truk about Transportation worksite to & fro of around. |
| 8 | Concrete cutting of approximately 8.21088 cum as per specification with all leads, lifts,including cost, carriage, royalty and taxes of all materials, mixing and vibrating concrete by mechanical means including hire and running charges of all machinery / equipments, construction/ erection and removal of gangways, stagings, scaffoldings & incidental charges complete for 4 Nos. of vent as per the direction of the Engineer in-Charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 29, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 09, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 10 daysNov 10, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 11 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender