Tender For Repair And Painting Of Various Type Of Steel Furniture For Md Accn Including Polishing, Painting And Canning At Pms Under Ge Panagarh
Tender Value
40 Lakhs
Estimated cost
Bid Submission
18 Nov 2026
6 days left
EMD
80000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Purba Bardhaman → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Repair And Painting Of Various Type Of Steel Furniture For Md Accn Including Polishing, Painting And Canning At Pms Under Ge Panagarh
BOQ
| Sl. No. | Item Description |
| 1 | WOODEN/STEEL/TP FURNITURERemoving/taking out carefully old unserviceable worn out/components/ parts as mentioned here-in-after of the following wooden/steel/TP furniture without disturbing the other parts and supply and fixing new parts with material and labour as specified and as appended below, made to shape & size all as per drawing and as directed and made to finishing to receive paint /polish and necessary welding if required, to bringout the new serviceable condition all as specified, directed and shown on drawing:- |
| 2 | Sleeping Bunk Steel (Single men) W/Ply FD/MAP/08 (R) Sketch (Shelter)- |
| 3 | Pre laminated particle board from the head board frame (Size of Board : 610mm x 330mm) |
| 4 | Pre laminated particle board from the foot board frame (Size of Board : 610mm x 220mm ) |
| 5 | Ply wood bed top 12mm thick, commercial, BWR Grade (IS-303) of existing shape & size and as directed by Engr-in-Charge. |
| 6 | Remove the existing middle stiffner and S & F new stiffner middle made out of 25mm x 25mm, MS tube of 1.6mm wall thickness. All as directed by Engineer-in-Charge and shown on drg. |
| 7 | PVC Shoes |
| 8 | FD-1008 Table 900 x 600 x 760 mm Steel W/Drawer |
| 9 | Top made out of 18/19mm thick prelaminated particle board one side teak veneered with 19x4mm teak wood beading duly french polished all around the top |
| 10 | Internal locks 40mm 4 lever with duplicate keys of approved quality. |
| 11 | Drawer of existing size and shape made out of MS sheet 1.00mm thick |
| 12 | Necessary welding in drawer to make functional as per existing size and shape. All as shown on drg. |
| 13 | PVC shoes |
| 14 | FD-1029 Locker Steel/ Locker Bed Side |
| 15 | Taking out of broken door shutter from Locker Steel and re-fixing the same existing door shutters in original position with pin type new steel hinges of existing size duly welded as required including denting . All as directed by Engineer-in-Charge and shown on drawing |
| 16 | Hasp & stappples of size 150 mm long chromium plated |
| 17 | Handle of size 100 mm long 'D' Type chromium plated |
| 18 | Hanging rod made out of 20mm dia chromium plated pipe 500mm long |
| 19 | Removing the worn out u/s leg and providing / fixing the new leg made out of MS sheet 1.00mm thick in its original position duly welded as per drg. |
| 20 | FD/MAP-II/01 Charpoy Hard Top MAP |
| 21 | (a) Remove the existing unserviceable Ply wood from Charpoy hard top with ply and making the frame to its original position by tightening etc and Supply & fixing with new ply wood 12mm thick, commercial, BWR Grade (IS-303) of existing shape & size and as directed by Engr-in-Charge. |
| 22 | (b) Remove the existing unserviceable shoes from Charpoy Hard Top MAP and and S & F new PVC Shoes. All as directed by Engineer-in-Charge and shown on drg. |
| 23 | (c) Remove the existing middle stiffner and S & F new stiffner middle made out of 25mm x 25mm, MS tube of 1.6mm wall thickness. All as directed by Engineer-in-Charge and shown on drg. |
| 24 | FD-1009 Table 900 X900 X 760 mm steel |
| 25 | (a) Removing of old and unserviceable top of table 900 x900 x760 mm steel and S&F new top made out of 18/19 mm thick pre-laminated particle board (ISI Marked) exterior grade one side teak veneered finish and other side having balancing white lamination with 19 x 4 mm teakwood beading all around the top and polishing the wooden frame shall be with french polish(to the entire satisfaction subject to minimum two coats ) including preparation of surfaces by scrapping /smoothing the surface all specified and shown on drawing . |
| 26 | (b) Electric welding to the broken /dislocated 25 x 25 mm square tube rails of tables 900 x900x 760 mm steel , length of welding exceeding 2.5 cm but not exceeding 5 cm ( each spots measured separately) thickness of metal to be welded not exceeding 6 mm , complete all as directed. |
| 27 | (c) Removing old unserviceable rubber shoes from the legs of 900 x900x 760 mm and S&F new rubber shoes off approved quality and tightly fitted and the bottom of legs all as specified and shown on drawing |
| 28 | FD-1028 Book Case Steel 4 Door |
| 29 | (a) Door made out of 1.00mm thick MS Sheet |
| 30 | (b) Sliding Roller with MS Channel 1.25mm thick |
| 31 | (c ) Glass 3mm thick |
| 32 | (d) Handle Stainless Steel 100mm |
| 33 | (e) Taking out of u/s worn out shelf and providing the new one of existing size and shape made out of MS sheet 1.00mm thick. All as shown on drg. |
| 34 | (f) Removing the worn out u/s lock from Book Case and providing/fixing with new lock 6 lever with deuplicate key ISI marked with round shape of MS key plate as approved by Engr-in-Charge/GE duly fixed as per drawing (Make- Godrej & Link). |
| 35 | FD-1028 Book Case Small Steel |
| 36 | (a) Door made out of 1.00mm thick MS Sheet |
| 37 | (b) Sliding Roller with MS Channel 1.25mm thick |
| 38 | (c ) Glass 3mm thick |
| 39 | (d) Handle Stainless Steel 100mm |
| 40 | (e) Taking out of u/s worn out shelf and providing the new one of existing size and shape made out of MS sheet 1.00mm thick. All as shown on drg. |
| 41 | (f) Removing the worn out u/s lock from Book Case and providing/fixing with new lock 6 lever with deuplicate key ISI marked with round shape of MS key plate as approved by Engr-in-Charge/GE duly fixed as per drawing (Make- Godrej & Link). |
| 42 | FD-1033 Almirah steel large 1/2H x 1/2 Sh |
| 43 | (a) Taking out of broken door shutter from Almirah Large Steel and re-fixing the same existing door shutters in original position with pin type new steel hinges of existing size duly welded as required including denting . All as directed by Engineer-in-Charge and shown on drawing |
| 44 | (b) Removing the worn out u/s handle from the almirah and providing/fixing of new handle chromium plated heavy duty as approved by Engr-in-Charge/GE. |
| 45 | (c) Removing the worn out u/s lock from almirah and providing/fixing with new lock 6 lever with deuplicate key ISI marked with round shape of MS key plate as approved by Engr-in-Charge/GE duly fixed as per drawing (Make- Godrej/Link/Bharat). |
| 46 | (d) Removing the worn out u/s 3 way locking device and providing/fixing the new one in its original postion as per drg. |
| 47 | (e) Removing the worn out u/s leg and providing / fixing the new leg made out of MS sheet 1.00mm thick in its original position duly welded as per drg. |
| 48 | (f) Removing the worn out u/s Hanging rod and providing / fixing the new Hanging rod made out of stainless steel in its original position as per drg. |
| 49 | (g) Taking out of u/s worn out shelf and providing the new one of existing size and shape made out of MS sheet 1.00mm thick. All as shown on drg. |
| 50 | FD/E6/MAP/05 Chair School with hand board |
| 51 | (a) S & F one piece PVC Back and Seat as per drg. |
| 52 | (b) S & F 18mm pre laminated particle board top openable with PVC edging screwed 25mm hole steel pipe inserted in 20mm MS rod welded to frame as per drg. |
| 53 | (c) S & F new Busket below the seat shall be made of 5mm dia 7 Nos mild steel rod made to shape as shown on drg. |
| 54 | (e ) Removing of old u/s rubber/PVC shoes from Chair Verandah & S/F new rubber shoes of apporoved quality & fixed at the bottom of legs of Chair Verandah |
| 55 | FD/E6/MAP/02 ® Rack Shoe Steel |
| 56 | (a) Replacement of 3mm dia CR Rod of length 300mm |
| 57 | (b) Replacement of worn out / rusted 25mm dia CR Pipe by welding with new parts |
| 58 | (c) 3mm dia CR Rod of length 700mm |
| 59 | (d) S&F PVC shoe fixed with MS Screw |
| 60 | FD-1043 Trestle Store Room Steel |
| 61 | (a) Repair of Trestle Store Room Steel by means of denting ,welding & scrapping wherever required making the frame in its original position and making functionel all as per drg and directed by engr- in- charge. |
| 62 | FD-1038 Rack Steel 6 Tier (closed type) |
| 63 | (a) Removing of unsv worn out back of rack steel closed type and S & F new back to rack steel closed type made of MS Sheet of 1 mm thick of eixsting shape and size and making functional. |
| 64 | (b) Removing of unsv sides of rack steel closed type and S &F new sidesmade of 1 mm thick MS Sheet in its original position as per drg & making functional |
| 65 | (c) Removing of unsv shelves of rack steel closed type and S & F new shelves made of 1 mm thick MS Sheet in its originnal position as per drg & making functional |
| 66 | (d) Removing of unsv MS angle iron from rack steel closed type and S & F new MS angle iron to rack steel closed type in its originzl position as per drg & making functional |
| 67 | FD-75(M) Chair CB Steel With Arm |
| 68 | (a) Removing the worn out u/s seat frame and providing/fixing the new one of existing size made out of 1st class teak wood duly re-caning with new plastic cane 2mm thick oval shape for general weaving and 4mm thick plastic cane for beading all around as show in drg. Wooden frame should be finished with black polish and fix in its original position with required screw(plastic cane type-I HDPE). |
| 69 | (c) Removing the worn out u/s handle made out of H.W(T.W) well seasoned and providing/fixing of exisiting size and shape with required screw after finish with black polish. |
| 70 | (c) Removing the worn out u/s back frame and providing/fixing the new one of existing size made out of 1st class teak wood duly re-caning with new plastic cane 2mm thick oval shape for general weaving and 4mm thick plastic cane for beading all around as show in drg. Wooden frame should be finished with black polish and fix in its original position with required screw(plastic cane type-I HDPE). |
| 71 | FD- 1003 Table office officer steel |
| 72 | (a) Removing old broken damaged top of table office officer steel and S/F new top made out of 18/19mm thick prelaminated particle board one side teak veneered with standard PVC edging all around the top. |
| 73 | (b) Removing old u/s internal drawer locks from table office officer steel and S/F new internal drawer locks 40mm 4 lever with duplicate keys of approved quality. |
| 74 | (c) Removing old broken u/s hard rubber shoes of table office officer steel and S/F new hard rubber shoes of approved quality & tightly fitted at the bottom of legs of table office officer steel complete all as specified and shown on drawing. |
| 75 | (d) Removing the worn out u/s legs from table office officer steel and providing/fixing with new legs as approved by Engr-in-Charge/GE duly fixed as per drawing (Make- Godrej & Link). |
| 76 | FD-1004 Table office clerk steel |
| 77 | (a) Removing old broken damaged top of table office clerk steel and S/F new top made out of 18/19mm thick prelaminated particle board one side teak veneered with 19x4mm teak wood beading duly french polished all around the top. |
| 78 | (b) Removing old u/s internal cupboard/drawer locks from table office clerk steel and S/F new internal locks 40mm 4 lever with duplicate keys of approved quality. |
| 79 | (c) Taking out of u/s worn out drawer and providing the new one of existing size and shape made out of MS sheet 1.00mm thick. All as shown on drg. |
| 80 | (d) Repair of Drawer and worn out welding in drawer in its original position existing size and shape. All as shown on drg. |
| 81 | (e) Removing old broken u/s rubber shoes of table office clerk steel and S/F new hard rubber shoes of approved quality & tightly fitted at the bottom of legs of table office clerk steel |
| 82 | (d) Removing the worn out u/s legs from table office officer steel and providing/fixing with new legs as approved by Engr-in-Charge/GE duly fixed as per drawing (Make- Godrej & Link). |
| 83 | FD- 1023 Side rack w/3 tray steel |
| 84 | (a) Repair of side rack with 3 tray Steel by means of denting ,welding & scrapping wherever required making the frame in its original position and making functionel all as per drg and directed by engr- in- charge. |
| 85 | (b) Removing of unsv MS angle iron fromSide rack with 3 tray steel and S & F new MS angle iron to side rackwith 3 tray steel closed type in its originzl position as per drg & making functional |
| 86 | (c) Removing of unsv shelves of side rack with 3 tray steel and S & F new shelves made of 1 mm thick MS Sheet in its originnal position as per drg & making functional |
| 87 | FD-1031 Almirah Steel large |
| 88 | (a) Taking out of broken door shutter from Almirah Large Steel and re-fixing the same existing door shutters in original position with pin type new steel hinges of existing size duly welded as required including denting . All as directed by Engineer-in-Charge and shown on drawing |
| 89 | (b) Removing the worn out u/s handle from the almirah and providing/fixing of new handle chromium plated heavy duty as approved by Engr-in-Charge/GE. |
| 90 | (c) Removing the worn out u/s lock from almirah and providing/fixing with new lock 6 lever with deuplicate key ISI marked with round shape of MS key plate as approved by Engr-in-Charge/GE duly fixed as per drawing. |
| 91 | (d) Removing the worn out u/s 3 way locking device and providing/fixing the new one in its original postion as per drg. |
| 92 | (e) Removing the worn out u/s leg and providing / fixing the new leg made out of MS sheet 1.00mm thick in its original position duly welded as per drg. |
| 93 | (f) Taking out of u/s worn out shelf and providing the new one of existing size and shape made out of MS sheet 1.00mm thick. All as shown on drg. |
| 94 | FD/MAP-II/15 (R) Table Bed Side (MAP ) |
| 95 | (a) Removing old broken damaged top of Table Bed side and S/F new top made out of 18/19mm thick prelaminated particle board one side teak veneered with 19x4mm teak wood beading duly french polished all around the top. here-in-before but for TableBed side |
| 96 | (b) Removing the US handle of table Bed side and providing the new one chromium plated 75 mm ' D' Type as approved/directed by Garrison Engineer and fixing the same in its original position. |
| 97 | (c) Remove of the old unsv existing drawers and supply and fixed new drawers made of 1st class hard seasoned teak wood free from knots duly french polished.. |
| 98 | (d) Remove of the old unsv existing runner channel and providing the new stainless steel runner channel asapproved/directed by Garrison Engineer and fixing the same in its original position. |
| 99 | (e) Remove the existing MS legs from 650 x 25 x 25 mm and S & F new leg made out of 25mm x 25mm x MS tube 1.6mm aell thickness. All as directed by Engineer-in-Charge and as shown on drg. |
| 100 | (f) Removing the US ply wood from the back of the Table bed side MAP and providing the new one made out of 6mm green ply BWR commercial and fixing the same in its original position as per drg. |
| 101 | (g) Tightening of complete steel frame of Table bed side by the help of scew driver or by welding and making functional. |
| 102 | (h) Removing old & u/s Hard rubber / PVC Shoe from Table Bed Side and supply and fixing new hard rubber / PVC Shoe to Table bed side at the bottom of legs complete all as directed & shown on drg. |
| 103 | (j) Removing old broken damaged both side of Table Bed side and S/F new side made out of 18/19mm thick prelaminated particle board. here-in-before but for Table Bed side |
| 104 | Material & labour for preparing old painted steel surfaces by removing dents and bends, clipping, welding the damaged sheet and filling with putty and cleaning the surface to smooth to any description and of any girth and applying two coat of synthetic enamel paint 1st Quality OG/SMOKE GRAY/BLACK OR AS APPROVED by GE paint both inside and outside (outside only in case of round/square pipe/tube) by spray painting all as specified in particular specification and as shown on drawing and as directed by Engineer-in-Charge for the following articles of Steel furniture/TP furniture :-(Note : Second coat will be done after complete dried up of 1st coat as and when ordered and approval of 1st coat from GE |
| 105 | FD/MAP/08 (R) Sketch (Shelter) Sleeping Bunk Steel (Single men) W/Ply |
| 106 | FD-1008 Table 900 x 600 x 760 mm Steel W/Drawer |
| 107 | FD-1029 Locker Steel/ Locker Bed Side |
| 108 | FD/MAP-II/01 Charpoy Hard Top MAP |
| 109 | FD-1009 Table 900 X900 X 760 mm steel |
| 110 | FD-1028 Book Case Steel 4 Door |
| 111 | FD-1028 Book Case Small Steel |
| 112 | FD-1033Almirah steel large 1/2H x 1/2 Sh |
| 113 | FD/E6/MAP/05 Chair School with hand board |
| 114 | FD/E6/MAP/02(R) Rack shoe steel |
| 115 | FD-1043 Trestle Store Room Steel |
| 116 | FD-1038 Rack Steel 6 Tier (closed type) |
| 117 | FD-75(M) Chair CB Steel With Arm |
| 118 | FD- 1003 Table office officer steel |
| 119 | FD-1004 Table office clerk steel |
| 120 | FD-1023 Side rack w/3 tray steel |
| 121 | FD-1031 Almirah Steel large |
| 122 | FD/MAP-II/15 ® Table Bed Side (MAP ) Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 29, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 18, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 6 daysNov 19, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 7 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender