Tender For Finishing Front Elevation, Brass Dye Cast Letters And Name Board In Tamil And English And Sign Board For All Room Arrangements For The Work Of Construction Of Additional Building For Intelligence Wing In Cto Office At Salem In Salem Distri
Tender Value
14.95 Lakhs
Estimated cost
Bid Submission
13 Nov 2026
11 days left
EMD
15000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Salem → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Finishing Front Elevation, Brass Dye Cast Letters And Name Board In Tamil And English And Sign Board For All Room Arrangements For The Work Of Construction Of Additional Building For Intelligence Wing In Cto Office At Salem In Salem District
BOQ
| Sl. No. | Item Description |
| 1 | Painting the wall two coats with approved Colour for a base layer of the wall with Texture Finish Paint for boxing type design of 450mmx150mm for elevation purpose including labour charges over one priming coat including thorough scrapping in all floors scoffolding charges, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification. |
| 2 | Supplying , fixing and roofing with colour galvalume sheet of 0.47mm thick with all necessary accessories such as J/V bolt and nuts of suitable length with suitable bitumen washers complete complying with standard specification and as directed by the departmental officers. |
| 3 | Supplying , fixing and roofing with colour Polycarbonate Sheet 6mm thick with all necessary accessories such as J/V bolt and nuts of suitable length with suitable bitumen washers complete complying with standard specification and as directed by the departmental officers. |
| 4 | Supplying and fixing 100mm dia GI pipe for shed including labour charges for cutting, welding and fixing with MS flats (excluding cost of flat), etc., as directed by the departmental officers |
| 5 | Supplying and fixing Mild Steel grills for windows, ventilators etc.,complete complying with standard specifications and as directed by the departmental officers. |
| 6 | Fabricating supplying and fixing in position M.S Steel framed Partition with weldmesh and fine wire mesh netting etc. The M.S Steel Outer frame of size 35x35x5mm L angle and Intermideant Sitffner fo 30x6mm at 2 nos for both horizontal and vertical and Weld mesh 7.5 x 2.5cm. 10 Gauge with necessary locking facilities and hinges for window opening and outer members which should be fixed or welded to masonry or column including necessary dismantling or making holes and redoing the same to original condition as directed by the departmenta officers inclusive of cost of providing one coat of best quality red oxide primer completre complying with standard specifications. |
| 7 | Providing and fixing of Aluminium Composite Panel (ACP) 4 sided having 50 x 25 x 1.50mm frame work vertical and horizontals out of specially designed extruded sections withstand wind pressure of 180 Kg/sq.m and fabricated fixed at all level elevation and heights. The extruded section cutting and fixing required space extruded section shall be of 6063 and alloy of BSH 9 confirming T is – 63400 rate shall included to fix the main frame with necessary clamps, fasteners, bolt nuts etc. The main frame of extruded section shall be of 22843 & 22739 (H9) grade conforming to BS 4174 (or) IS 8147. Rate shall included 4mm thick ACP sheet (0.25+ 3.5 + 0.25) alstrong or equivalent fixing with spacer tape and the ACP sheet bounded with special type structural sealant of dow corning 789 or equivalent in dust free conditions the gaps between ACP sheet to be filed with whether sealant and backer rod or 12mm foam sheet to ensure water and air tightness in all complete complying with standard specification as directed by the departmental officer |
| 8 | Supplying and fixing in position PVC low level flushing tank with all internal fittings - (wall mounting type) for Indian Water Closet (Oriya type) by dismantling brick masonry wall / reinforced cement concrete roof / floor slab and making good the dismantled portion to the original condition with leakages etc., complete complying with standard specifications and as directed by the departmental officers. (The flushing tank should be got approved by the Executive Engineer before use on works). |
| 9 | Supplying and fixing Solid PVC Urinal partition of size 450x900mm fixing in position with all necessary accessories complete complying with standard specification and as directed by the departmental officers. |
| 10 | Supplying and fixing CP Two Way Bib Cock with Health Faucet fixing in position with all necessary accessories complete complying with standard specification and as directed by the departmental officers. |
| 11 | Painting new iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with two coats of best approved first quality and colour of synthetic enamel paint over the existing red oxide priming coat in all floors excluding cost of priming coat etc., complete complying with standard specification and as directed by the departmental officers. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.) |
| 12 | Supplying and fixing 300mm dia RCC Hume Pipe including labour charges for cutting laying etc complete, etc., as directed by the departmental officers |
| 13 | Providing and fixing of display panels and name boards of various size using acrylic boards fixed on walls using screws and glue etc., complete complying with standard specification. The Size and Colour of display panels should be got approved and as directed by the departmental officers before execution of work. |
| 14 | Supplying and Fixing of BRASS Dye Cast Letters of approved size and colour. The colour treatment process is achieved with MRF colour coat and then the processed coloured layer is set into the kiln for the heat treatment process for the following sizes. |
| 15 | English Brass Letters 10\\" |
| 16 | Tamil Brass Letters 10\\" |
| 17 | Stainless Steel Emplom 15\\" |
| 18 | GST Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 29, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 13, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 11 daysNov 13, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 11 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender