Tender For Providing And Installation Of Bus Queue Shelters At Various Locations Mc Panipat.
Tender Value
1.03 Crore
Estimated cost
Bid Submission
13 Nov 2026
13 days left
EMD
2.08 Lakhs
Bank guarantee accepted
Document Fee
2500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Panipat → Haryana
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Providing And Installation Of Bus Queue Shelters At Various Locations Mc Panipat.
BOQ
| Sl. No. | Item Description |
| 1 | `Providning Bus Shelters. Bus Shelters.Specification: -SIZE -9Mtr X 2.4Mtr X 2.5 Mtr 1. Providing and pasting at site high grade printed vinyl with bus shelter name logo, route number etc. on one sides of the front facia information board. The vinyl shall be minimum 85 micron thick, of LG or equivalent make complete in all respect and to the entire satisfaction of engineer-in-charge `2. Supplying and fixing single sided aluminum frame signage made of 6063-T5 aluminum frame with section weight 3.80 to 4.00kg/m with minimum tensile strength 22000 psi as per drawing provided having 4mm clear solid compact polycarbonate in front and 3mm ACP sheet reinforced with internal support frame at rear completely sealed with the of silicon and EPDM to make it dust and water proof should have the inbuilt strong clipping and frame arrangement for holding the flex or digital media along with all necessary cleats and corner Joinery required to build thus signage with sufficient strength. The aluminum frame should have strong locking arrangement which can resist theft. The aluminum frame should have polyester powder coating with minimum thickness of 60 micron. Signage should have inbuilt arrangement of mounting it with the bus shelter structure. `3.Supplying and fixing of double sided aluminum frame signage made of 6063-T5 aluminum frame with section weight 5.3 to5.5kg/m with minimum tensile strength 22000 psi as per drawing provided having 4mm clear solid compact polycarbonate on both side and reinforced with internal support frame, completely sealed with the help of silicon and EPDM to make it dust and water proof. Should have the inbuilt STRONG clipping and framearrangement for holding the flex of digital media alongwith all necessary cleats and corner Joinery require to build the signagewith sufficient strength. The aluminum frame should have strong locking arrangement which can resist theft. The aluminum frame should have polyester powder coating with minimum thickness of 60 micron, signage should have inbuilt arrangement of mounting it with the bus shelter structure. The enclosure should provide weather proof protection required for the`4. Vandal resistant light source ofpolycarbonate body with compact fluorescent lamp of white colour of 55w of standard, MY 1: of approved make with IP 67 approval, including cable fixing, switch gear etc. all complete.5. Providing and fixing MS Electrical weather proof leader box approximately 600mm wide and 900mm high as required for installing MCB switch gear and meters as required for advertisement and other electrical gear, with provision for inserting cable condails as per design. The access to feeder box shall be through a toll based (common for all locks provided in each package) key, Tools should not be identical for different package shelters6. Providing and fixing anodized aluminum 25 x 50mm channel frame with 40W standard manufactured tube light fittings with electronic choke starters and wiring all complete connection to electrical supply drom feeder box with minimum 4 tubelights x per square meter (of add panel size) or actual requirement decided by the engineer in charge. The tube light frame and fittings (including that in feeder pillar) should include ballast ELCB timer MCB mounting blocks etc. The tube light alignment should allow two way lighting (front and back) of add panel7. Providing and fixing various member of material shall be austenitic steel of the grade 1.4301 (widely known as 304) it shall contain 17-18% chromium and 8-11% nickel as per specification) complete in all respect and to the entire satisfaction of the Engineer in charge.`8. Providing and fixing heavy duty SS prefabricated dust bins with canopy and two point support grouted in cement mortar andfinished as per floor finish. -50 Ltr`9. Providing and fixing 5-walled , 10mm thick polycarbonate multiwall sheet bronze colour having a light transmission of 37% with a Uvalue of 2.39 w/m2 K. Lexan thermoclear multiwall sheet LT2UV105R175 from SABIC innovative plastics or Equivalent. Fixing of the 10mm sheet to be done with profiles having EPDM / silicon. Aluminum profiles need to use and front and rear of polycarbonate sheet has to be closed by aluminum profile. Sq. mtr 19 INSTALLATION WORK included |
| 2 | Providing and installation of Bus Queue Shelters at Various Locations MC Panipat. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 29, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 13, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 13 daysNov 13, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 13 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender