Tender For Bmc For Plumbing & Sanitary System In Csl Estate Outside Csl Main Yard, Kochi (Jan 2027- Dec 2028)
Tender Value
38.99 Lakhs
Estimated cost
Bid Submission
19 Nov 2026
11 days left
EMD
78000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Ernakulam → Kerala
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Bmc For Plumbing & Sanitary System In Csl Estate Outside Csl Main Yard, Kochi (Jan 2027- Dec 2028)
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 04-Nov-2026 | Date_Corrigendum | Date | 19-Nov-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Demolishing Plain cement concrete/ RCC work including separately removing and stacking the available reinforcement and clearing away the debris within a lead of 150m complete. |
| 2 | Demolishing brick/ solid block work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 150 metres lead. |
| 3 | Dismantling all types of old plaster in all levels raking out joints and cleaning the surface for re-plastering including disposal of rubbish to the dumping ground within 150 meters lead. |
| 4 | Dismantling all type of tile works, in floors, walls and roofs laid in cement mortar including disposal & stacking material within 150 meters lead. |
| 5 | Dismantling for repairing and refitting all type of taps/stopcocks / all valves(up to 65mm), fittings of wash basins, fittings of WC, seat cover, Flushing cistern fittings, health faucet, fittings of sink, shower rose, fittings of urinals etc. including all labour and other incidentals, etc. (excluding rates of fittings which will be measured and paid separately) |
| 6 | Dismantling carefully existing wash basin, sink, EWC, flushing cisterns and urinal pans of all sizes, for conducting repair work in waterline and refitting the same in position after completing the repair, including all labour for dismantling and refitting but excluding cost of fittings. |
| 7 | Dismantling the G.I/PVC/ CPVC/Cast Iron pipes of any diameter (with specials and other fittings) from wall/floor including cutting and making good the walls by plastering etc. (excluding cost of cement) |
| 8 | Dismantling of existing manholes of any size. Rate shall include cost of dismantling and disposing of waste with in a distance of 1km. |
| 9 | Dismantling and demolishing carefully existing damaged wash basin, sink, EWC, flushing cisterns and urinal pans of all sizes, for replacing the same with new ones in position, including all labour for dismantling and demolishing,stacking of serviceable material and disposal of unserviceable material within 150 metres lead but excluding cost of fittings. Cost of supply & insallation of new wash basin, sink, EWC, flushing cisterns and urinal pan will be measured separately. |
| 10 | Dismantling and demolishing all type of taps/stopcocks/angle cocks,pillar cocks / all valves(up to 65mm), fittings of wash basins, fittings of sink, WC seat cover and its fittings, health faucet, shower rose, shower arm, Bottle trap, PVC connections, Fittings of flushing cistern etc. including all labour and other incidentals. (excluding rates of fittings which will be measured and paid separately) |
| 11 | Chipping the existing mosaic/cement/tile floor of toilet at all heights and carefully dismantling the existing closet, removal of damaged trap removing the filled up earth and sand, cleaning the closet thoroughly, removal of all debris from the existing toilet floor, repairing trap to suit the site condition extend outlet pipe from bath room if necessary, dewatering the closet, repair the room and the depressed floor if necessary, then filling the room with the sand already removed. Consolidating properly, provide additional quantity of sand if necessary for filling the room as per the site requirement. Provide PCC 1:2:4 for flooring and plastering with cement mortar 1:4, 12mm thick,laying the floor tiles, providing new G.I gratings if requires etc. complete. The rate is inclusive for providing brick work for fixing the closet and trap support and also cleaning the manhole and sanitary pipe lines disposal of scum etc. all cost of materials, lifting of materials, to the required height, all cost of materials, labour and other sundries etc. complete. (Cement, tile work,new sanitary fittings will be measured and paid separately) |
| 12 | Clearing the chocking of outlet pipes/gully traps/ urinals/ wash basins etc in all the floors, including all incidental charges, dismantling, cleaning and refitting the waste pipes if necessary. |
| 13 | Clearing the water closet chocking without damaging the closet, including cost and conveyance charges for all tools and materials, Labour charges etc., complete. |
| 14 | Up to 3 Mtrs. Height |
| 15 | Above 3 mtr. Height |
| 16 | Cleaning the manhole of all sizes and clearing the scum, sludge, floating objects etc. and disposing the same in the pit which was already made at the places pointed out including removing and refixing RCC/cast iron covers , pointing the joints with mortar wherever necessary and backfilling the pit with excavated earth etc. complete. |
| 17 | Manholes with RCC cover slabs |
| 18 | Manholes with MS / C.I. Covers |
| 19 | Cleaning the pipe line and clearing the scum, sludge, floating objects etc. and disposing the same in pits which are already excavated at places pointed out including backfilling the pit with the excavated earth without emitting foul smell etc. complete. |
| 20 | Cleaning the RCC/masnory surface/sump tank up to 50000 liters capacity by clearing all debris and moss etc. clearing the sidewalls, floors and slabs by wire brushing and cleaning the entire surface with alum and pottassium permanganate solution. The rate includes cost of all materials, labour charges, hire charges of pump, cost of fuel, hire for tools etc. |
| 21 | Cleaning the RCC/masonry overhead tanks - clearing all debris and moss etc. cleaning the side walls, floors and slab by wire brushing , cleaning the entire surface with alum and pottassium permanganate solution. The rate includes cost of all materials, labour charges for drain out water, cost of fuel, hire for tools etc |
| 22 | Up to 10000 Ltrs. Capacity |
| 23 | Above 10000 Ltrs. Up to 30000 Ltrs. Capacity |
| 24 | Cleaning the PVC water tanks (at all levels) of following capacity after emptying, including brushing, washing etc. complete. |
| 25 | All works upto plinth level |
| 26 | All works above plinth level upto 13th floor |
| 27 | Cleaning the septic tank/sullage tank by suction and clearing the scum & sludge using tankers, the sludge to be disposed outside quarters area, including removing the cover slab and refixing the same in position and to be sealed using cement mortar, (including rate for loading,transporting and unloading), all labour for sealing etc.complete, (payment for sludge accumalated in septic tank, not for the quantity carried out by tanker) but excluding cost of cement |
| 28 | Excavation work by mechanical means (Hydraulic excavator)/ manual means in any soil (not exceeding 1.5m in width or 10 sqm on plan),including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 150 m. |
| 29 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering , lead up to 50 m and lift upto 1.5 m. |
| 30 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering , lead up to 50 m and lift upto 1.5 m. |
| 31 | Providing and constructing 30x20x15 cm solid concrete block masonry in CM 1:6 in walls work up to Vth floor level, using best quality solid concrete blocks including cost & conveyance of all materials, scaffolding, curing, racking joints, watering, labour, delivery, handling, unloading, storing of all materials, wastage, etc complete but excluding the cost of cement. |
| 32 | Plastering with CM 1:4, 12mm thk floated hard and trowelled smooth finished with floating coat of neat cement mix including cost and conveyance of all materials, labour, curing, scaffoldings etc.complete at all levels but excluding cost of cement. |
| 33 | Supplying and laying anti-skid/ non slippery ceramic tile 300 X 300 mm flooring tiles of approved quality, brand and colour (Asian/Somany/Kajaria/ Johnson/ RAK) set in CM 1:4 20mm thick and adding necessary cement grout for the proper binding of the tiles to line and level,providing 3mm spacing and pointing the joints using epoxy grout mix of approved brand, filling/ grouting and finishing to match with the tiles including cost and conveyance of all materials, labour other incidentals etc. complete excluding cost of cement. |
| 34 | Supplying and laying ceramic glazed tiles 300 X 450 mm of approved quality, brand and colour (Asian/Somany/Kajaria/ Johnson/ RAK) for dadoing by pasting with chemical adhesive Cerabond /equivalent and providing 3mm spacing and pointing the joints using epoxy grout mix of approved brand, filling/ grouting and finishing to match with the tiles in line and level including cleaning the existing surface properly, cost and conveyance of all materials, labour other incidentals etc. complete. Basic price for tile is 500/-. |
| 35 | Supplying and fixing stainless steel sink of size 50x45cm and 1mm thick of approved quality and shape after removing the existing damaged sink including cost and conveyance of all materials, labour other incidentals etc. complete. |
| 36 | Filling the gap between sink and granite slab having length of approximately 50cm with silicone sealant to rectify the leakage including cost and conveyance of all materials, consumables, labour charges etc., complete. |
| 37 | Supplying & installing at site in position FRP manhole cover of size 450 x 450mm and frame with closed bottom (not thru & thru) lifting key holes, Drilling hole to the manhole, anchoring, Laying of PCC 1:2:4 on sides including all cost and conveyance charges, cost of materials, tools and labour etc. complete |
| 38 | Replacing existing damaged spindle of following accessories using ISI marked/best quality spindle including cost and conveyance of all labour and other incidentals etc. complete. |
| 39 | Shower mixer tap |
| 40 | Supply & installation of 50mm dia. Class B Multi Jet Water meter of approved make, fixing the meter in the existing 63mm dia. PVC Water supply line by reducing the line to 50mm dia. with all necessary fittings including cost and conveyance of all materials, consumables, labour charges etc., complete. |
| 41 | Supplying & installing at site in position ASTM (SCH 40) unthreaded pipes up to a dia. of 63 mm of approved make, with all necessary fittings (elbows, unions, tees, reducers, couplings, nipples etc.) complete and joining in position with ASTM solvent, including cost and conveyance of all materials, consumables, labour charges etc., complete. |
| 42 | Supplying and fixing health faucet with tube & wall hook of approved quality and make including cost and conveyance, all labour for fixing, all incidental charges etc. complete. |
| 43 | Supplying and fixing CP Bottle trap of approved quality and make, sealing the joints with silicone sealant of approved brand including cost and conveyance, all labour for fixing, all incidental charges etc. complete. |
| 44 | Supplying, threading, laying and jointing the following dia. 'B' class G.I pipes and specials such a tees, bends, elbows, checknuts etc. with clamps, plugs, screws etc. including cutting and making good the walls, RCC floors, slabs etc trenching through all stratas to a maximum depth of 0.45m and refilling etc. complete. |
| 45 | 15 mm dia |
| 46 | 20 mm dia |
| 47 | 25 mm dia |
| 48 | 32 mm dia |
| 49 | 50mm dia |
| 50 | 65mm dia |
| 51 | Supplying, cutting, threading, laying and jointing rigid Polyvinyl - chloride (PVC) pipes (Hycount or equivalent) including all specials such as tees, bends, elbows, reducers, plugs etc.This includes jointing of pipes & fittings, with solvent cement and the cost of cutting chases and making good the same including testing of joints complete. Concealed work, including cutting chases and making good the wall etc. |
| 52 | 20 mm dia (10 Kg/cm2) |
| 53 | 25 mm dia (10 Kg/cm2) |
| 54 | 32 mm dia (10 Kg/cm2) |
| 55 | 40mm dia (10 Kg/cm2) |
| 56 | 50mm dia (10 Kg/cm2) |
| 57 | 63mm dia (6 Kg/cm2) |
| 58 | 75mm dia (6 Kg/cm2) |
| 59 | 110mm dia (6 Kg/cm2) |
| 60 | 160mm dia (6 Kg/cm2) |
| 61 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe. This includes jointing of pipes & fittings, with one step CPVC solvent cement and the cost of cutting chases and making good the same up to 10m height complete. Concealed work, including cutting chases and making good the wall etc. |
| 62 | 20 mm dia |
| 63 | 25 mm dia |
| 64 | 32 mm dia |
| 65 | Rectification of leakage of PVC pipes of various dia in water lines upto length of less than 50 cms including cost of PVC pipes and specials such as couplings, bends, tees, reduced tees, unions, nipples, washers, adapters (male or female), reducers, elbows etc. including all labour and incidental charges etc. complete. (Rate quoted shall be for the rectification of one leak at a time and number of specials and length of pipe to be used may vary according to the nature of leak). All specials specified above are covered under this item but not fittings. |
| 66 | 15 mm to 32mm dia |
| 67 | 40 mm to 110mm dia |
| 68 | Rectification of leakage of CPVC pipes of various dia in water lines upto length of less than 50 cms including cost of CPVC pipes and specials such as couplings, bends, tees, reduced tees, unions, nipples, washers, adapters (male or female), reducers, elbows etc. including all labour and incidental charges etc. complete. (Rate quoted shall be for the rectification of one leak at a time and number of specials and length of pipe to be used may vary according to the nature of leak). All specials specified above are covered under this item but not fittings. |
| 69 | 15 mm to 32mm dia |
| 70 | Supplying and installing water storage tanks of sintex -Reno/megha/wesfa with white coating inside or equivalent brand at all heights, including cost and conveyance of materials, all labour for lifting etc. complete, in various capacities. |
| 71 | Supplying and transporting, positioning of the following capacity ferro-cement tank of approved quality after excavaing the earth up to required depth from ground level, including cost and conveyance of all materials, all labour etc. complete. |
| 72 | Constructing manhole / catchpit of size 450x450 mm (clear inside dimension) and depth varying from 450 to 600 mm for connecting sewer lines with PCC 100mm thick base, 200 thk wall using brick/solid block/hollow block, forming channel with PCC 1:2:4, plastering outside with CM 1:3, 15mm thick and plastering inside with CM 1:3, 15mm thick and cement flushing coat ,earth work for pit,back filling etc. including cost and conveyance of all materials, all labour, other incidentals, etc. complete, but excluding cost of cement . |
| 73 | Supplying and fixing/ replacing the following best quality fittings /specials for PVC flushing cistern including cost of materials, labour charges, other incidentals etc. complete. |
| 74 | PVC syphon to suit the PVC flush tank |
| 75 | PVC handle for PVC flush tank |
| 76 | PVC float valves for flush tanks |
| 77 | Syphon washer for PVC flush tank |
| 78 | Supplying and fixing ISI marked/best quality approved brand 110 mm PVC specials at all heights including cost and conveyance, all labour and all other incidentals etc. complete. |
| 79 | Tees, door tees, bends,Yee etc. |
| 80 | Adapters, reducers, offsets, vent cowl etc. |
| 81 | Elbows, door elbows, reducer elbows, etc. |
| 82 | Supplying and fixing ISI marked/best quality approved brand 160 mm PVC specials at all heights including cost and conveyance, all labour and all other incidentals etc. complete. |
| 83 | Tees, door tees, bends,Yee etc. |
| 84 | Adapters, reducers, offsets, vent cowl etc. |
| 85 | Elbows, door elbows, reducer elbows, etc. |
| 86 | Supplying and fixing the following water supply fittings including cost and conveyance of all materials necessary nipple, C.I flanges, bolts, nuts, packings , all labour for fitting, all other incidental charges etc. complete for all levels. |
| 87 | Brass Fully way wheel valve(ISI heavy type) |
| 88 | 25 mm |
| 89 | C.P. Brass/G.M. stop cock(heavy type) |
| 90 | 15 mm |
| 91 | 20 mm |
| 92 | Taps / Valves etc. |
| 93 | 15mm C.P /brass tap (superior quality) 400g |
| 94 | 15mm CP hose tap (superior quality) |
| 95 | 15mm CP push cock |
| 96 | 15mm C.P. Pillar tap (best quality) |
| 97 | 15 mm CP long body tap |
| 98 | 15 mm CP short body tap |
| 99 | 15mm two way tap |
| 100 | 15mm dia Angle cock |
| 101 | 15 mm 15mm PVC taps |
| 102 | 15mm sink cock |
| 103 | Stop cock up to 20mm (concealed) |
| 104 | Push cock up to 20mm |
| 105 | G.M / brass float valve with polythene float.(ISI-Heavy type) |
| 106 | 20 mm |
| 107 | 25 mm |
| 108 | 40 mm |
| 109 | 50 mm |
| 110 | Non Return Valve |
| 111 | 20 mm sizes |
| 112 | 25 mm sizes |
| 113 | 40 mm sizes |
| 114 | 50 mm sizes |
| 115 | 63 mm size |
| 116 | 100 mm size |
| 117 | SS gratings |
| 118 | 75mm /100 mm size |
| 119 | 125/150mm size |
| 120 | C.P waste couplings |
| 121 | 40 mm |
| 122 | 100mm |
| 123 | PVC waste connections |
| 124 | 32 mm / 40 mm size |
| 125 | G.I Unions |
| 126 | 25 mm |
| 127 | 32/40 mm |
| 128 | 50 mm |
| 129 | 63 mm |
| 130 | G.I. Hexagonal nipples |
| 131 | 15mm / 20mm & 25mm size |
| 132 | 40mm & 50mm size |
| 133 | 65mm size |
| 134 | PVC Foot valve |
| 135 | 25mm /32mm size |
| 136 | 40 mm / 50mm size |
| 137 | 63mm size |
| 138 | Brass Foot valve |
| 139 | 25mm /32mm size |
| 140 | 40 mm / 50mm size |
| 141 | Brass ball valve |
| 142 | 15 mm sizes |
| 143 | 20 mm sizes |
| 144 | 25 mm size |
| 145 | 32 mm size |
| 146 | 40 mm size |
| 147 | 50 mm size |
| 148 | 63 mm size |
| 149 | Non Return/ Check valve |
| 150 | 20 mm dia (3/4\\") |
| 151 | 32 mm (1.1/4\\") |
| 152 | 40 mm dia (1.1/2\\") |
| 153 | 50mm (2\\") |
| 154 | 63mm (2.1/4\\") |
| 155 | G.I Barrel Nipple |
| 156 | G.I Barrel nipple 1\\"x 6\\" |
| 157 | G.I Barrel nipple 1.1/2\\"x 12\\" |
| 158 | G.I Barrel nipple 2.1/2\\"x24\\" |
| 159 | G.I Barrel nipple 2.1/2\\"x36\\" |
| 160 | Other items |
| 161 | C.P. cup for concealed water line fittings of 15mm and 20mm dia |
| 162 | 100 x 100mm C.P. brass adjustable shower rose- ordinary type |
| 163 | 200 x 200mm C.P. brass adjustable shower rose- ordinary type |
| 164 | Shower arm 15mm/20mm dia |
| 165 | CP Brass Toilet paper holder |
| 166 | C P Health faucet holder |
| 167 | Soap Dish (Cera) |
| 168 | Soap Dispenser with holder |
| 169 | Supplying and fixing /replacing 15mm/12 mm PVC inlet connection. |
| 170 | Supplying and fixing of 20 mm PVC Air releasing valve including cost and conveyance, all labour for fitting, all incidental charges etc. complete. |
| 171 | Supplying and fixing of following PVC ball valves including cost and conveyance, all labour for fitting, all incidental charges etc. complete. |
| 172 | 20 mm sizes |
| 173 | 25 mm size |
| 174 | 32 mm size |
| 175 | 40 mm size |
| 176 | 50 mm size |
| 177 | Supplying and fixing of following PVC Float valve with polythene floats including cost and conveyance, all labour for fitting, all incidental charges etc. complete. |
| 178 | 15 mm sizes |
| 179 | 20 mm size |
| 180 | 25 mm size |
| 181 | Supplying and fixing white glazed Vitreous china European type water closet of approved quality, at all floors, including cost and conveyance of all materials,all labour, all other incidental charges etc. (excluding seat cover and flushing cistern) |
| 182 | EWC in quarters building |
| 183 | EWC in L block building |
| 184 | Supplying and fixing the approved quality ISI marked White colour PVC flushing cistern 10 litre or nearest capacity, including cost of materials, labour charges, all other incidentals etc. complete. |
| 185 | Supplying and fixing the approved quality ISI marked white colour ceramic flushing cistern 10 ltr capacity including cost of materials, tools and laboures etc complete. (Brand :Cera) |
| 186 | Supplying and fixing/ replacing the following best quality fittings /specials for ceramic flushing cistern including cost of materials, labour charges, other incidentals etc. complete. |
| 187 | PVC syphon to suit the ceramic flush tank |
| 188 | Push button to suit the ceramic flush tank |
| 189 | Float valves to suit the ceramic flush tank |
| 190 | Syphon washer to suit the ceramic flush tank |
| 191 | Supplying and fixing wash basin ceramic type white colour of approved make and quality in position, including cost and conveyance of all materials, labour charges, all other incidentals etc.complete. |
| 192 | 550mm x 400mm or nearest size |
| 193 | 450mm x 300mm or nearest size |
| 194 | Wash basin in L block |
| 195 | Suppplying and fixing 32mm PVC telescopic flush pipe and connections to suit the cistern already fixed, including cost of all materials, labour charges etc. complete. |
| 196 | Supplying and fixing duroplastic seat with cover of approved colour and make in position for European water closet, including cost and conveyance of materials, labour charges for dismantling and fitting, all other incidentals etc. complete. |
| 197 | Supplying and fixing C.I brackets for wash hand basins one pair of varying sizes including cost and conveyance of all materials, labour charges, all other incidentals etc. complete. |
| 198 | Supplying and fixing 15mm size Chambal or equivalent make water meters conforming to relevant ISI including cost of materials, labour charges, all other incidentals etc. complete. |
| 199 | Supplying and fixing PVC Multi trap in position, including cost and conveyance of all materials labour charges all incidentals etc complete. |
| 200 | Supplying and fixing SS net in double layers for vent cowl including cost and conveyance of all materials, labour charges and other sundries etc. complete. |
| 201 | Supplying and replacing impeller of 5HP centrifugal pump The rate includes dismantling pipe lines, pump etc. and re-fitting after the completion of the work, cost of all materials, gasket, nuts, bolts, labour etc.complete. |
| 202 | Supplying and replacing Shaft Sleeve of the existing 5HP pumps. The rate includes dismantling pipe lines, pump etc. and re-fitting after the completion of the work, cost of all materials, consumables, labour etc. |
| 203 | Supplying and replacing of 6mm gland packing one set for the 5HP pump including dismantling pipe lines, pump etc. and refitting after the completion of work, cost of all materials, labour etc. complete. |
| 204 | Supplying and replacing full gland packing of the existing 5HP pump one set including dismantling pipe lines, pump etc. and refitting after the completion of work, cost of all materials, labour etc. complete. |
| 205 | Rewinding of 1 HP to 2 HP motor using super enamelled copper winding wire of same gauge and size used in the motor under operation including cost of materials, labour charges to and fro transportation, dismantling pipe lines and refitting after completion of work, other sundries etc. complete. |
| 206 | Rewinding of 5 HP motor using super enamelled copper winding wire of same gauge and size used in the motor under operation including cost of materials, labour charges to and fro transportation, dismantling pipe lines and refitting after completion of work, other sundries etc. complete. |
| 207 | Renewal of terminal block of 5HP Motor , including all cost and conveyance charges, tools and machineries, labour charges etc, complete. |
| 208 | Supplying and replacing of bearing 6206/6208 SKF brand (Purchased only from authorised dealer) including cost of all materials, labour charges, conveyance, dismantling pipe line and refitting after the completion of work etc. |
| 209 | Overhauling of Motor (5HP) of any make including cost of all materials, labour charges, varnishing, painting, dismantling motor/pipe lines and refitting after the completion of work etc. complete. |
| 210 | Servicing the specialized equipments through authorized firms by engaging technicians including replacement of damaged accessories with new accessories of approved make if required, including cost and conveyance charges for all accessories, machineries, tools and labour charges etc., complete. ( Basic price for accessories considered as Rs.500/-, Payments shall be made on submission of Original GST invoices from authorized accessory dealers) |
| 211 | Supplying and fixing of one side informatory retro reflective sign board using super high efficency sticker fixing with white colour bonded on to existing Aluminium sheet surface of board. The rate is including the cost of all material all labour other incidental etc complete. |
| 212 | Carrying out miscellaneous works by arranging various categories of labour. |
| 213 | Mason, Plumber, Painter, Welder, Fabricator and other skilled workers |
| 214 | Man, Women and other non skilled workers |
| 215 | Supplying and stacking at site (OPC/PPC/PSC) cement conforming to relevant IS code. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Nov 04, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Nov 19, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 11 daysNov 19, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 11 daysNov 20, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 12 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender