Tender For Periodic Maintenance On Sarkaghat Rissa Mandap Baroti Road (Portion Sarori To Pouda Mod Km 0/00 To 18/880 (Sh: Providing And Laying 30 Mm Thick Bituminous Concrete Priming Coat, Tack Coat, Between Km 1/00 To 4/00) Mdr Road
Tender Value
51.77 Lakhs
Estimated cost
Bid Submission
04 Nov 2026
0 days left
EMD
1.03 Lakhs
Bank guarantee accepted
Document Fee
2000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Mandi → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Periodic Maintenance On Sarkaghat Rissa Mandap Baroti Road (Portion Sarori To Pouda Mod Km 0/00 To 18/880 (Sh: Providing And Laying 30 Mm Thick Bituminous Concrete Priming Coat, Tack Coat, Between Km 1/00 To 4/00) Mdr Road
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 30-Oct-2026 | Corrigendum | Other | 04-Nov-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Repair to pot holes by removing loose material, trimming of sides, and cleaning of surface then providing tack coat at the rate of 0.30kg (zero point three zero killogramme) per square temperature, of road surface with bitumen VG-10 (ten) flllowed by 20mm (twenty millimetre) thick premix carpet using 1.46 kg (one point four six killogramme) with bitumen VG-10 (ten) and size 0.27 (zero point two seven) cubic metre of crushed stone aggregate of proper grading for square metre of road surface mixed and heated to proper temperature in mix all 6-10 (six- ten) tonne capacity rolled to desired density with 8-10 (eight-ten) tonne weight static road roller fllowed by seal coat IRC type-B using 0.68kg (zero point six eight killogramme) of bitumen VG-10 (ten) and 0.086 (zero point zero eight six) cubic metre of sand per square metre of road surface dully mixed and heated in mix all to the required temperature and properly rolled after laying with 8-10 (eight-ten )tonne wight static road roller to the desired density.Including supplying and laying of G-III in pot holes as per tenichical specification Clause 1904.2 and the Engineer-in-charge. |
| 2 | Providing and applying priming coat using bitumen emulsion conforming to IS:8887, using emulsion pressure distributer including preparing the surface & cleaning with mechanical broom.on bitumen surface @ 0.25 kg/sqm (Zero point two five kilogram). with medium bitumen emulsion within all leads and lifts and as per direction of Engineer -In -charge and other incidentials. |
| 3 | Providing and applying tack coat using hot straight run bitumen of grade VG - 10, including heating the bitumen,spraying the bitumen with mechanically operated spray unit fitted on bitumen boiler, cleaning and preparing the existing road surface as per specifications On W.B.M. @ 0.75 Kg / sqm (zero point seven five killogramme square metre )within all leads, and other incidentals. |
| 4 | Providing and laying bituminous concrete 30mm (Thirty millimetre) thick with 100-120 TPH batch type hot mix plant producing an averege out put of 75 tonnes per hour using crushed aggregateof specific grading premix with bituminous binder @ 5.4 to 5.6 percent (five point four to five point percent ) of mix filleren tranported and hot mix to work to site upto a lead of 1000 metre (one thousand metre) laid over a previously prepered surface with hydrostatic paver finisher with sensor control to the required grade level and alignment rolling with smooth wheeled vibratry and tandom roller to achieved the desired compaction as per technical specification clause 509 with in all leads and lifts as per direction of Engineer-in-charge. |
| 5 | Providing and laying of hot applied thermoplastic compound 2.5mm ( Two point five millimetre)thick including reflectorising glass beads @ 250 grams ( Two hundred fifty )per square metre area, thickness of 2.5 mm(Two point five millimetre) is execlusive of surface applied glass beads as per IRC: 35. The finished surface to be level,uniform and free from steaks and hole with in all leads and lifts as per direction of Engineer-in-charge. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 30, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Nov 04, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
TodayNov 04, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
TodayTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender