Tender For Maintenance & Repair Of Kkb Project Division Office At Mouza- Lutunia, Block & Ps-Sabang And Dist-Paschim Medinipur
Tender Value
6.31 Lakhs
Estimated cost
Bid Submission
13 Nov 2026
12 days left
EMD
12623
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Medinipur West → West Bengal
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Maintenance & Repair Of Kkb Project Division Office At Mouza- Lutunia, Block & Ps-Sabang And Dist-Paschim Medinipur
BOQ
| Sl. No. | Item Description |
| 1 | Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant lS codes |
| 2 | Pakur Variety |
| 3 | Stripping off worn out plaster and raking out joints of walls, cellings etc, upto any height and in any floor including removing rubish within a lead of 75 m as directed. |
| 4 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed andraking out joints including throating, nosing and drip course, scaffolding /staging where necessary (Ground floor). [Excluding cost of chipping over concrete surface] |
| 5 | with 1:4 cement mortar |
| 6 | 15mm thk. Plaster |
| 7 | Neat cement punning about 1.5 mm. thick in wall, dado, window, sills, floor, drain etc. |
| 8 | Rendering the surface of walls and ceiling with white cement based wall putty of approved make and brand (1.5mm thick). |
| 9 | Applying lnterior grade Acrylic Primer of approved quality and brand on plastered or cencrete surface old or new surface to receive Distemper/ Acrylic emulsion paint including scraping and preparingthe surface throughly, complete as per manufacturer's specification and as per direction of the ElC. (ln Ground Floor) |
| 10 | Two Coats |
| 11 | Water based interior grade Acrylic Primer |
| 12 | Applying Acrylic Emulsion Paint of approved make and brand on walls and ceiling including sand papering in intermediate coats including putty (to be done under specific struction of Superintending Engineer) : |
| 13 | Two coats |
| 14 | Standard Quality |
| 15 | Supplying and laying true to line and level vitrified tiles of lapproved brand (size not less than 600 mm X 600 mm X10 mm thick) in floor, skirting etc. set in 20 mm sand cement mortar (1:4) and 2 mm thick cement slurry back side of tiles using cement @ 2.91Kg./sqM or using polymerised adhesive (6 mm thick layer applied directly over finished artificial stone floor/Mosaic etc without any backing course) laid after application slurry using 1.75 Kg of cement per sqM below mortar only, joints grouted with admixture of white cement and colouring pigment to match with colour of tiles / epoxy grout materials of approved make as directed and removal of wax coating of top surface of tiles with warm water and polishing the tiles using soft and dry cloth upto mirror finish complete including the cost of materials, labour and all other incidental charges complete true to the manufacturer,s specification and direction of Engineer-in-Charge. (White cement, synthetic adhesive and grout material to be supplied by the contrrle) t) With application slurry @1.75 kg/ Sq.m, 20 mm sandcement mortar (1:4) & 2 mm thick cement slurry at back side of tiles, 0.2 kg/ Sq.m white cement for joint filling with pigment. |
| 16 | Deep Colour & White |
| 17 | Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. |
| 18 | Priming one coat on timbe ror plastered surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc |
| 19 | Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc.on the surface, if necessary : |
| 20 | On steel or other metal surface With super gloss (hi-gloss) |
| 21 | Two coats (with any shade except white) |
| 22 | On timber or plastered surface : With super gloss (hi-gloss) |
| 23 | Two coats (with any shade except white) |
| 24 | Supplying, fitting & fixing granite slab 15mm to18 mm thick in floor, lobby, stair, landing and treads etc. over 20mm(avg) thick base of cement morter(1:2) laid with white cement slurry @ 4.40Kg per Square meter before placing of granite and jointed with white cement slurry @ 2.0Kg per square meter with necessary pigments and complete as per direction of Engineer-in-charge including cost of allmaterials, labours, curing and roughening of concrete surface complete. ln ground floor |
| 25 | Area of each Granite slab upto 0.60 Square meter. |
| 26 | Supplying, fitting & fixing of 2-Track / 3-Track Aluminium sliding Window of all Aluminium sections viz. window frame (top, bottom & sideframe), shutter (top, bottom, side & interlock member) made of aluminium alloy extrusions conforming to lS 733-1983 & lS 1285-1975, annodised conforming to lS 1868-1983, fitted with all other accessories viz.PVC roller, EPDM gasket, maruti lock, screws etc. including labour charges for fitting & fixing of aluminium 2-track/3-track sliding window with fixing of glass (excluding cost of glass) all complete as per architectural drawings and direction of Engineer-in-charge. 10-12 Micron thickness Annodizing film Natural white For 2-Track window :Members for Bottom frame @ 0.875 Kg per Mtr.and for Top and Side frame @ 0.778 Kg per Mtr. and for shutter Bottomand Top member @ 0.472 Kg per Mtr., Style sidemember @ 0.493 Kgper Mtr. and lnterlock member @ 0.672 Kg per Mtr.For 3-Track window : Members for Bottom frame @ 1.233 Kg per Mtr.and for Top and Side frame @ 7.067 Kg per Mtr. and for shutter Bottomand Top member @ 0.472 Kg per Mtr., Style side member @ 0.493 Kg per Mtr. and lnterlock member @ 0.612 Kg per Mtr. [Note : for estimate purpose construction wing may consider weight of 2-track Aluminium window @ 5.5 Kg per Sq.M.and 3-track Aluminium window @ 6.5 Kg per Sq.M] |
| 27 | Supplying bubble free float glass of approved make and brand conforming to lS: 2835-1987; |
| 28 | coloured, toughened glass conforming to lS:2553-1 992 (part-ll) |
| 29 | 6mm thick |
| 30 | Supplying bubble free float glass of approved make and brand conforming to lS: 2835-1987; |
| 31 | coloured, toughened glass conforming to lS:2553-1 992 (part-ll) |
| 32 | 8mm thick Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Oct 29, 2026
11:30 IST
Tender Published
Tender notice published.
CompletedNov 13, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 12 daysNov 13, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 12 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender